• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.581-593
• /
• 2017

멀티콥터형 무인기용 고효율 프로펠러 개발을 위하여 공기역학 및 구조역학적 성능을 고려하여 설계 해석 시험을 수행하였다. 고효율 프로펠러 설계를 위해 익형 형상 결정은 최적설계기법을 적용하였으며, 프로펠러의 3차원 플랜폼은 유도동력을 최소화하기 위해 설계되었다. 도출된 형상은 구조설계 및 해석을 통하여 비행적합성을 판단하였으며, 해석적으로 설계된 형상에 대한 성능을 확인하기 위해 회전시험을 수행하였다. 본 논문에서는 이와 같은 설계 해석 시험 방법을 이용하여 절차적 프로펠러 설계방법론을 제시하고 있다.

• 에너지공학
• /
• 제5권2호
• /
• pp.138-145
• /
• 1996

The particulate collection at high temperature and high pressure (HTHP) is important on the advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Coal Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require the absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection on the advanced coal power generation system. However, rigid ceramic filters and granular bed filter among them show the best potential. The current technology of these collectors was evaluated in this paper. The experienced problems of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters has the best potential for IGCC at this moment because it has nearly the highest efficiency comparing with other filtering systems and has accumulated many reliable design data resulted from many field experiences.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.123-131
• /
• 1997

Design of single stage AC/DC converter with high power factor for low power level applications is proposed. The proposed converter gives the good power factor correction, low line current harmonic distortions, and tight output voltage regulations. This converter also has a high efficiency by employing an active clamp method and synchronous rectifiers. To verify the performances of the proposed converter, a 90W-converter has been designed. The modelling of this proposed converter is power formed using an averaging technique and based on this model a detailed analysis is carried out. This prototype meets the IEC555-2 requirements satisfactorily with nearly unity power factor and high efficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.27-28
• /
• 2015

In this paper a high efficiency wireless on-board charger for Electric Vehicle (EV) is proposed and the theoretical analysis based on the two-port network model to come up with suitable design for the battery charge application is presented. The proposed Wireless Power Transfer (WPT) method has adopted four-coil system with air core and its superior performance is proved by comparing it to the conventional two-coil system by the mathematical analysis. In addition, since the proposed WPT converter is able to operate at an almost constant frequency regardless of the load, CC/CV charge of the battery can be simply implemented. A 6.6kW prototype is implemented with 20cm air gap to prove the validity of the proposed method. The experimental results show that the dc to dc conversion efficiency of the proposed system achieves 97.08% at 3.7 kW.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.666-674
• /
• 2016

In this paper, a high efficiency satellite electrical power supply system is proposed. The increased efficiency of the power supply system allows for downscaling of the solar array and battery weight, which are among the most important satellite design considerations. The satellite power supply system comprises two units, namely a generation unit and a storage unit. To increase the efficiency of the solar array, a maximum power point tracker (MPPT) is used in the power generation unit. In order to improve the MPPT performance, a novel algorithm is proposed on the basis of the hill climbing method. This method can track the main peak of the array power curve in satellites with long duration missions under unpredicted circumstances such as a part of the array being damaged or the presence of a shadow. A lithium-ion battery is utilized in the storage unit. An algorithm for calculating the optimal rate of battery charging is proposed where the battery is charged with the maximum possible efficiency considering the situation of the satellite. The proposed system is designed and manufactured. In addition, it is compared to the conventional power supply systems in similar satellites. Results show a 12% increase in the overall efficiency of the power supply system when compared to the conventional method.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.107-114
• /
• 2020

2.4 GHz ISM대역 전력증폭기를 설계하고 송신 시스템을 구현하였다. 고효율 증폭기는 E급이나 F급 증폭기로 구현 가능하다. 본 연구에서는 회로 구조가 간단한 E급으로 20 W 급 고효율 증폭기를 설계하여 ISM 대역 응용에 적용하도록 하였다. E급 회로 설계이론 및 회로 시뮬레이션을 통해 임피던스 정합회로를 설계하였으며 2.45 GHz에서 출력전력 44.2 dBm 및 전력부가효율 69%를 얻었다. 설계된 전력증폭기에 30 dBm의 입력전력을 인가하기 위하여 앞단에 전압제어발진기와 구동증폭기를 제작하여 입력전력 공급회로를 구현하였고, 제작한 전력증폭기는 43.2 dBm 출력 및 65%의 전력부가효율 특성을 나타내었다. 본 연구결과는 무선전력전송, 전파차단장치, 고출력 송신장치 등 다양한 무선통신시스템용 출력 전력증폭기 설계에 활용될 수 있다.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.230-236
• /
• 2011

In previous researches, the self-stability was studied for the spring-mass model and the two segment leg model. In these researches, it was presented that the spring-mass model has the self-stable region at relatively high speed running and the two segment leg model has the self-stable region at relatively low speed running. If the model was run in the self-stable region, the cost of transport is zero ideally. That is, actually, only the energy loss is needed to compensate for running. This means that the energy efficiency is high, running in the self-stable region. We want to have high energy efficiency at low and high speed running. So, in this paper, we propose the design direction of the three segment leg having the self-stable region at low and high speed running. And we prove the self-stable region of the three segment leg designed by the proposed design direction.

• Nuclear Engineering and Technology
• /
• 제39권4호
• /
• pp.249-256
• /
• 2007

Light water reactors operated under supercritical pressure conditions have been selected as one of the promising future reactor concepts to be studied by the Generation IV International Forum. Whereas the steam cycle of such reactors can be derived from modem fossil fired power plants, the reactor itself, and in particular the reactor core, still need to be developed. Different core design concepts shall be described here to outline the strategy. A first option for near future applications is a pressurized water reactor with $380^{\circ}C$ core exit temperature, having a closed primary loop and achieving 2% pts. higher net efficiency and 24% higher specific turbine power than latest pressurized water reactors. More efficiency and turbine power can be gained from core exit temperatures around $500^{\circ}C$, which require a multi step heat up process in the core with intermediate coolant mixing, achieving up to 44% net efficiency. The paper summarizes different core and assembly design approaches which have been studied recently for such High Performance Light Water Reactors.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.169-174
• /
• 2006

본 연구는 재생냉각형 고압 축소형 연소기 설계에 관한 것으로 이 연소기를 제작하기 전에 열유속측정을 위한 물냉각 고압 축소형 연소기를 제작하였다. 물냉각 고압 축소형 연소기의 연소시험결과 높은 연소성능 및 냉각성능이 검증된 설계 조건을 얻었고 이를 바탕으로 재생냉각형 고압 축소형 연소기의 형상을 설계하였다. 설계된 연소기의 형상은 제작이 완료된 후 연소시험을 수행하여 실용성을 검증 할 예정이다.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1667-1670
• /
• 2004

In DNA microarray produced by DNA-deposition technology, DNA-immobilization and -hybridization yields on a solid support are most important factors for its accuracy and sensitivity. We have developed a dendrimeric support using silylated aldehyde slides and polyamidoamine (PAMAM) dendrimers. An oligonucleotide array was prepared through a crosslinking between the dendrimeric support and an oligonucleotide. Both DNAimmobilization and -hybridization yields on the solid support increased by the modification with the dendrimers. The increase of the immobilization and hybridization efficiency seems to result from a threedimensional arrangement of the attached oligonucleotide. Therefore, our dendrimeric support may provide a simple and efficient solution to the preparation of DNA microarrays with high-density DNA-deposition and high hybridization efficiency.