• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.73-80
• /
• 2013

이 연구는 폴리머 시멘트 슬러리로 도장한 도장철근의 부착강도 개선에 영향을 미치는 초기재령에서의 PCS 도장재 배합에 관한 연구로 폴리머의 종류, 시멘트의 종류, 폴리머 시멘트비, 도장재의 양생재령, 도장두께 등을 변화시켜 배합을 설정하여 부착강도 시험을 실시하였다. 이 연구 결과, PCS 도장철근의 부착강도는 거의 모든 배합에서 도장하지 않은 보통철근 및 에폭시철근에 비해 높은 부착강도를 나타냈다. 도장철근의 최대 부착강도는 보통철근에 비해 1.52배, 에폭시 철근에 비해 1.58배로 높게 나타났으며, 도장두께는 $100{\mu}m$에서 우수하였으며, 시멘트는 초조강 시멘트, 폴리머는 EVA, 폴리머 시멘트비는 80%~100% 범위에서 우수한 부착강도를 나타냈다. 또한 양생재령에 있어서는 3시간의 단시간 양생에 의한 부착강도도 양생재령 1일 및 7일에 비해 열악하지 않고 동등이상의 부착강도를 나타내 실제 현장에서의 사용성면에서 유리한 것으로 볼 수 있다.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.95-100
• /
• 2009

본 연구에서는 신속개방형 포장 콘크리트의 적정배합비를 도출하기 위한 실험을 실시하였다. 콘크리트 타설 후 8시간 후 교통개방을 하기 위해 조강제 및 조강시멘트를 사용하였으며 조강제의 적정 혼입량을 결정하기 위해 예비실험을 실시하였다. 이를 바탕으로 시멘트 및 잔골재율을 변수로 공기량, 슬럼프 경시변화, 응결시험, 압축강도, 휨강도 시험을 실시하였다. 실험 결과 8시간 목표 압축강도 21 MPa, 휨강도 3.8 MPa를 만족하는 신속개방형 교통개방 포장 콘크리트의 적정배합비를 도출하였다.

• 한국결정성장학회지
• /
• 제24권1호
• /
• pp.27-32
• /
• 2014

본 연구에서는 매스콘크리트의 수화열 저감 및 초기강도 향상을 목적으로 3성분계 배합에 따른 콘크리트의 기초적 특성을 분석하였는데 결과를 요약하면 다음과 같다. 굳지 않은 콘크리트의 물성은 목표범위를 모두 만족하는 것으로 나타났다. 응결시간은 W/B와 관계없이 저열 시멘트 배합이 가장 빠른 것으로 나타났고, 간이 수화열은 저열 배합의 피크 온도가 가장 높은 것으로 나타났고, 저발열-B 배합이 가장 낮은 온도를 나타내었으며, 조강형 저발열 배합은 저발열-B와 유사한 것으로 나타났다. 경화 콘크리트의 압축강도는 초기재령에서 저발열-B 배합을 제외한 모든 배합이 유사한 강도 범위를 나타내었고, 장기 재령에서는 큰 차이 없이 유사한 강도 범위를 나타내었다.

• KCI Concrete Journal
• /
• 제14권2호
• /
• pp.81-85
• /
• 2002

The strength development of concrete is influenced by temperature and cement type which greatly affect hydration degree of cement. There is not pertinent concrete strength management method in korea. There are several methods for estimating the in-place strength of concrete. One such method is the maturity concept. The maturity concept is based on the fact that concrete gains strength gradually as a result of chemical reactions between cement and water; and for a specific concrete mixture, strength at any age and at normal conditions is related to the degree of hydration. The rate of hydration and, therefore, strength development of a given concrete will be a function of its temperature. Thus, strength of concrete depends on its time-temperature history. The goals of the present study are to investigate a relationship between strength of high-strength concrete and maturity that is expressed as a function of an integral of the curing period and temperature and predict strength of concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.43-48
• /
• 2001

The use of fly ash in cement and concrete industries has many benefits including engineering, economic, and ecological aspects. However, it has a disadvantage of low strength development, especially at early ages. In this study, in order to overcome this problem, the early strength accelerating agent($NA_{2}$ $SO_{4}$) was selected and applied to the production of high strength concrete(HSC) containing fly ash. It was found that the compressive strength of fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ has greater than that of concrete containing fly ash only until 7 days after casting. From the microstructural point of view, ettringite increased and pores decreased in fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ , leading to the development of early age strength. It was also found that the velocity vs. strength relationship of HSC is considerably different from that of low-strength concrete(LSC). Therefore, in order to predict early age strength of HSC, a estimation equation different from that for LSC is needed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.108-112
• /
• 1995

In this study, the fundamental properties of nonshrinkage high strength concrete using calcium sulphoaluminate cement (CSA cement) which was develiped at the Ssangyong Cement Ind, CO., Ltd. Were considered by some experiments. The concrete using CSA cement show a good workability and higher strength development in early age. And, the resultant compressive strength was also higher than OPC. The drying shrinkage of CSA concrete was much less than that of concrete made with OPC and expansive agent.In addition, the value of drying shrinkage was not dependent on the agitating time and the curing condition. Compared to that of OPC.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.394-400
• /
• 2010

This study examined the effects of particle size on characteristics of cement by controlling the particle size of commercial cement. Through a size adjustment, the cement has increasing more of particles that are less than $10{\mu}m$ in size so the initial reaction time has been shortened as a result of improvement in the early hydration reaction. Additionally, it showed a great characteristics of strength from the early age and the initial hydration heat has been increased as well. In the upper and middle parts cements, the initial hydration reaction rate contribution is high with the $10{\mu}m$ compared to original cement. So the initial hydration reaction rate is improved and as a result, it also showed relatively high hydration heat as well. Additionally, adiabatic temperature also showed an increase rate in the results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.56-57
• /
• 2013

In this study, in regard to concrete considering variety of admixture content rate, we evaluated property of adiabatic temperature rise. By setting up high temperature history, we evaluated effect to compression strength property of high strength concrete by early high temperature history. As a result, early high temperature history accelerated Hydration reaction of cement and contribute early strength development but it didn't accomplish performance objective in long-term aged.

• 한국건설순환자원학회논문집
• /
• 제7권1호
• /
• pp.51-59
• /
• 2012

최근의 초고층건축물의 건설로 인하여 겨울철에 타설하는 한중콘크리트의 문제점을 해결하기위한 노력이 이루어지고 있으며, 본 연구에서는 조기강도 개선을 위한 실험 변수별 배합확인 실험을 통해 조기강도 개선용 콘크리트의 표준배합을 설정하고 각요인별 강도특성을 검토하고자 하였다. 한중콘크리트 실험에서 OPC보다 OPC에 조기강도 특성을 개선한 시멘트와 3종조강시멘트가 우수하였다. 혼화제는 폴리카르본산계 혼화제가 강도발현 특성에 우수한 것으로 나타났으며, 혼화재의 경우 플라이애시의 사용으로 인한 조기강도 발현성능이 불리한 것으로 판단하여 본실험에서는 배제하였고, 강도발현을 위한 최적온도는 $12^{\circ}C$ 이상으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.33-36
• /
• 2005

Recently, the use of volcanic-ash as a part of cement content in concrete is very common. But, it has been indicated that the compressive strength of concrete using large amount of volcanic-ash as a part of cement content in early age is low and carbonation velocity is fast. To solve those problems, High Volume Volcanic-Ash Concrete which contained large amount of volcanic-ash as a part of fine aggregate has been proposed. This is an experimential study to compare and analyze the properties of High Volumn Volcanic-Ash Concrete according to the replacement method and ratio of volcanic-ash. For this purpose, the mix proportion of concrete according to the replacement method(PL, C10, C150, A10, A100, A150) And then slump, setting time, bleeding, compressive strength, tensile strength and carbornation test were performed. According to test results, it was found that the compressive strength of the concrete using the volcanic-ash as a part of fine aggregate(A) was higher than that of the concrete using the volcanic-ash as a part of cement content(C). And, the compressive strength of the A concrete increased in early age as well as in long tern age as the volcanic-ash content increased.