• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.314-317
• /
• 2007

Domestic automobile industries have been focusing their effort on development of exhaust manifolds using high temperature stainless steel. Exhaust manifolds fabricated with stainless steels can be categorized into tubular and cast ones. The former is usually manufactured by forming and welding process and the latter by vacuum casting process. In the present study, high temperature mechanical properties of 5 austenitic stainless steels, one was sand cast and the others vacuum cast, were investigated by performing a series of high temperature tensile tests and high temperature low cycle fatigue tests.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.65-69
• /
• 2003

The effects of microstructural features on the fracture behaviors, including impact, high-cycle fatigue, fatigue and crack propagation, of thixoformed 357-T5 (Al-7%Si-0.6%Mg) alloy were examined. The resistance to impact and high-cycle fatigueof thixoformed 357-T5 tended to improve greatly with increasing solid volume fraction. An almost three-fold increase in impact energy value was, for example, observed with increasing solid volume fraction from 59 to 70%. The improvement in both impact and fatigue properties of thixoformed 357-75 with increasing solid volume fraction in the present study appeared to be related to the magnitude of stress concentration at the interface between primary and eutectic phase, by which the fracture process was largely influenced. Based on the fractographic and micrographic observations, the mechanism associated with the beneficial effect of high solid volume fraction in thixoformed 357-T5 alloy was discussed.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.753-763
• /
• 2016

High temperature sodium/sulfur battery(Na/S battery) has good electrochemical properties, but, the battery has some problems such as explosion and corrosion at al. because of using the liquid electrodes at high temperature and production of high corrosion. Room temperature sodium/sulfur batteries (NAS batteries) is developed to resolve of the battery problem. To recently, room temperature sodium/sulfur batteries has higher discharge capacity than its of lithium ion battery, however, cycle life of the battery is shorter. Because, the sulfur electrode and electrolyte have some problem such as polysulfide resolution in electrolyte and reaction of anode material and polysulfide. Cycle life of the battery is improved by decrease of polysulfide resolution in electrolyte and block of reaction between anode material and polysulfide. If room temperature sodium/sulfur batteries (NAS batteries) with low cost and high capacity improves cycle life, the batteries will be commercialized batteries for electric storage, electric vehicle, and mobile electric items.

• Journal of the Korean housing association
• /
• v.7 no.1
• /
• pp.75-84
• /
• 1996

This study examines the furniture usage behavior of the apartment dwellers in tile city of furniture usage by resident’s characteristics, such as floor space size, household income, the stage of family life cycle and housewife’s age. To this end, interviews were conducted with 304 individuals, either household heads or their spouses living in three residential areas in Seoul. The sample was selected among people living in apartment units with the 30s and 40s pyong of floor space size.The major findings of this study are as fllows ; The furniture and furnishings selected for the study are grouped into four clusters such as conversation-space components, ordinary decoration, high-quality decoration and miscellaneous components. Families in the stage of primary school life cycle were likely to possess fewer furniture and decorations than those in the stage of high school life cycle and in the launching stage. Younger housewives are less likely to possess ordinary and high-quality decorations than the older. Those living in the larger apartment units are likely to decorate their living room in an ornamental rather than functional way, and to possess more ordinary and high-quality decorations than those in the smaller. In this study, the size of floor space appers a variable most powerful to explain the pattern of furniture usage.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.203-210
• /
• 2010

The signification of calorie/water (C/W) ratio was investigated in the treatment of highly concentrated organic wastes by thermophilic oxic process (TOP). Swine waste was used in this study. When C/W ratio was 1.6, most of swine waste was decomposed and all water was evaporated in the 24-h injection cycle. To improve treatment efficiency of TOP treating swine waste, the effect of shortening the swine waste injection cycle was examined. The shortening of injection cycle was conducted to stimulate the activity of thermophilic bacteria. A high temperature in the reactor was maintained by shortening of the injection cycle. When the swine waste injection cycle was shortened, the C/W ratio was fixed at 1.6. As a result, by shortening the swine waste injection cycle from 24-h to 12 and 6-h, the maximum loading rate of swine waste per day could be improved 1.9 and 3.5 times, respectively.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1076-1080
• /
• 2009

An analysis of Life Cycle Cost (LCC) is to evaluate the system through the total cost accounting during the total life cycle. Railway system has problem that abundant capital has to be utilized efficiently because railway system is a combined system such as power supply, machines, electric signals. Especially, Magnetic Levitation Train needs high technique and more study about the Life Cycle cost by using the system being developed currently in Korea. Therefore, the Modeling of Life Cycle Cost for Magnetic Levitation Train is proposed considering the tendency of the studies in other countries.

• Journal of Hydrogen and New Energy
• /
• v.29 no.2
• /
• pp.148-154
• /
• 2018

This paper presents a comparative analysis of thermodynamic performance of ammonia-water Rankine cycles with and without regeneration and Kalina cycle for recovery of low-temperature heat source. Special attention is paid to the effect of system parameters such as ammonia mass fraction and turbine inlet pressure on the characteristics of the system. Results show that maximum net power can be obtained in the regenerative Rankine cycle for high turbine inlet pressures. However, Kalina cycle shows better net power and thermal efficiency for low turbine inlet pressures, and the optimum ammonia mass fractions of Kalina cycle are lower than Rankine cycles.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.647-657
• /
• 2016

This study investigated domestic and foreign cycle wear sizing systems for the domestic market and provided basic data for development of a high functional cycle wear with excellent fitness qualities. Each brand was found to have different dimension items and different sizes as well as size deviation and range according to each item. Therefore, a size selected by referring to the dimension items would be expected to have confusion when selecting a size. Domestic brands are able to selects sizes relatively easily because they suggest sizes mainly by height and weight (which are a universal size). However, the development of a sizing system for domestic cycle wear brands is needed because each brand have different sizes according to its dimension items. Foreign brands are also different from domestic brands in size marking items and sizes according to items. Therefore, the establishment of a sizing system standard for foreign brands is necessary because there could be a problem with fitness in the same sizes selected for domestic brands. Cycle wear is also able to cover various body types due to the elasticity of its material; however, and evaluation of fitness and a follow-up study will be necessary to develop cycle wear with a fitness that is proper for a Korean body type.

• Journal of The Korean Association For Science Education
• /
• v.15 no.3
• /
• pp.284-290
• /
• 1995

This study examined the effects of the learning cycle model by learner's characteristics such as I.Q., cognitive levels, inquiry skins, cognitive style, activity, reflectiveness. To see the effects of the learning cycle model, nonequivalent control group pretest-posttest multiple treatment designs was used in the study. 99 middle school second-graders(female) were divided into two groups. One group was selected as the experimental group (n=50), the other served at the comparison group(n=49). During the eight-month period, the students in the experimental group were instructed according to the learning cycle model, while the students in the comparison group were instructed according to the traditional instruction methods. Achievement data from science achievement test were analyzed by an ANOVA technique. The results of the study are as follows : 1. Science knowledge achievement. For the lower level students of activity, the learning cycle model is superior to the traditional approaches in science knowledge achievement. 2. Science inquiry skills. For the upper level students of I.Q., cognitive levels, inquiry skills, cognitive style and reflectiveness, the learning cycle model is superior to the traditional approaches in science inquiry skills. 3. Attitudes toward science. For the lower level students of I.Q., cognitive levels, inquiry skills, cognitive style, activity and reflectiveness, the learning cycle model is superior to the traditional approaches in attitudes toward science.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.647-661
• /
• 2015

The supercritical $CO_2$ (S-$CO_2$) Brayton cycle has recently been gaining a lot of attention for application to next generation nuclear reactors. The advantages of the S-$CO_2$ cycle are high efficiency in the mild turbine inlet temperature region and a small physical footprint with a simple layout, compact turbomachinery, and heat exchangers. Several heat sources including nuclear, fossil fuel, waste heat, and renewable heat sources such as solar thermal or fuel cells are potential application areas of the S-$CO_2$ cycle. In this paper, the current development progress of the S-$CO_2$ cycle is introduced. Moreover, a quick comparison of various S-$CO_2$ layouts is presented in terms of cycle performance.