• 한국추진공학회지
• /
• 제18권2호
• /
• pp.42-51
• /
• 2014

기존 항공유보다 비등점을 높인 고비등점 연료에 대하여 다양한 분사 압력 조건에서 비등점 이상의 온도까지 연료를 가열하는 경우의 분사특성을 실험적으로 연구하였다. 연료 온도 상승에 따른 인젝터의 특성은 유량계수(${\alpha}$)와 캐비테이션 수($K_c$)를 파라미터로 나타내었는데, 고온에서의 각 연료별 ${\alpha}$ 특성을 $K_c$에 대해 나타내면 그 경향이 모두 유사한 것으로 확인되었다. 한편, 고비점 연료들은 기존 연료에 비하여 비등의 효과가 나타나기 시작하는 온도가 더 높아졌을 뿐만 아니라, 그 이상의 온도에서도 분사 특성에 미치는 인젝터 내부의 비등 영향을 더 적게 받았다.

• 한국분무공학회지
• /
• 제28권2호
• /
• pp.89-96
• /
• 2023

This study presents a numerical simulation investigating hydrodynamic characteristics of high-temperature hydrocarbon aviation fuel injected through a plain orifice injector. The analysis encompassed the temperature range up to the critical point, and the obtained results were compared with prior experimental observations. The analysis unveiled that the injector's exit pressure remains equivalent to the ambient pressure when the fuel injection temperature is below the boiling point. However, when the fuel temperature surpasses the boiling point, the exit pressure of the injector transitions to the saturated vapor pressure corresponding to the fuel injection temperature. Consequently, the exit pressure of the injector increases in tandem with the rapid increase of the saturation vapor pressure due to escalating fuel temperatures. This rise in the exit pressure necessitates a proportional increase in fuel injection pressure to ensure a fixed fuel mass flow rate. Furthermore, the investigation revealed that the discharge coefficient obtained by applying the exit pressure instead of the ambient pressure did exhibit no decrease, but rather was maintained at a nearly constant value, comparable to its level below the boiling point.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.707-716
• /
• 2008

The objective of this study was to analyze the effect of mixed fuel composition and mass fraction on spray inner structure in evaporating transient spray under the variant ambient conditions. Spray structure and spatial distribution of liquid phase concentration were investigated using a thin laser sheet illumination technique on the three component mixed fuels. A pulsed Nd:YAG laser was used as a light source. The experiments were conducted in a constant volume vessel with optical access. Fuel was injected into the vessel with electronically controlled common rail injector. Used fuel contains i-octane($C_8H_{18}$), n-dodecane($C_{12}H_{26}$) and n-hexadecane($C_{16}H_{34}$) that were selected as low-, middle- and high-boiling point fuel, respectively. Experimental conditions are 42 MPa, 72 MPa and 112 MPa in injection pressure, $5\;kg/m^3$, $15kg/m^3$ and $30kg/m^3$ in ambient gas density, 300 K, 500 K, 600 K and 700 K in ambient gas temperature, 300 K and 368 K in fuel temperature and different fuel mass fraction. Experimental results indicated that the multi-component fuels made two phase region mixed vapor and liquid so that it would are helpful to improve combustion, for the fuels of high boiling point component could accelerate evaporation very much according as low boiling point fuel was added to high boiling point fuel.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.44-51
• /
• 2003

By blending of various low boiling point oxygenated agents to lower grade fuels, significant improvements were simultaneously obtained in smoke, CO, PM, SOF and BSEC. Especially, our trends were remarkably obtained by retarding injection timing, by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than non-oxygenated agents. Also, it was revealed that when 20vo1.% DMM added to high viscosity fuels and injection timing was retarded, NOx-smoke trade off relationship was much better than that of ordinary diesel fuel. Thus, lower grade fuels with high viscosity could be expected to be used efficiently and cleanly in diesel operation by blending low boiling point oxygenates.

• 에너지공학
• /
• 제13권1호
• /
• pp.20-27
• /
• 2004

본 연구에서는 고점도 저질유를 연료로 사용하는 디젤기관에 있어서 연료에 저비점 함산소물질을 혼합하였을 때의 배기배출물 특성변화에 대해 조사하였다. 실험은 6종류의 혼합물을 여러 혼합비로 베이스 연료에 첨가하여 기관 성능과 배기배출물 특성 변화에 대해 실시하였으며, 다음과 같은 결론을 얻었다. 저질유로의 저비점물질 흔합에 의해 매연 CO, PM, SOF 및 열소비율이 대폭적으로 개선되었다. 이러한 경향은 분사시기 지연시에 현저하였으며, 혼합물질의 비점이 낮을 수록 혼합비율이 클수록 또한 비함산소 물질보다는 함산소물질에 있어서 더 현저하였다. 또한, 저질유에 함산소물질 DMM을 20 vo1.% 흔합하고 연료분사시기를 지연시킬 경우에는 통상의 경유 운전을 상회하는 NOx-매연 트레이드 오프 관계가 얻어졌다. 따라서, 고점도의 저질유연료를 사용하는 디젤운전에 있어서도 저비점 함산소물질의 혼합에 의해 효과적이고 청정하게 사용될 수 있을 것으로 기대된다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2125-2131
• /
• 1991

본 연구에서는 고온고압의 기류중에 투입된 미소연료액적의 증발에 관한 정보 를 구하여 분무연소기구의 해명을 위한 기초테이터를 제공하려 시도한다.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.682-691
• /
• 2006

This study was conducted to assess the effect of mixed fuel composition and mass fraction on spray inner structure in evaporating transient spray under the various ambient conditions. Spray structure and spatial distribution of liquid phase concentration are investigated using a thin laser sheet illumination technique on the multi-component mixed fuels. A pulsed Ar+ laser was used as a light source. The experiments were conducted in a constant volume vessel with optical access. Fuel was injected into the vessel with electronically controlled common rail injector. Used fuel contain $i-octane(C_8H_{18}),\;n-dodecane(C_{12}H_{26})$ and $n-hexadecane(C_{16}H_{34})$ that are selected as low-, middle- and high-boiling point fuel, respectively. Experimental conditions are 25Mpa, 42MPa, 72MPa and 112MPa in injection pressure, $5kg/m^3,\;15kg/m^3\;and\;20kg/m^3$ in ambient gas density, 400K, 500K, 600K and 700K in ambient gas temperature, 300K and 368K in fuel temperature, and different fuel mass fraction. Experimental results indicate that the more high-boiling point component, the longer the liquid phase it were closely related to fuel physical properties, but injection pressure had no effect on. And there was a high correlation between the liquid phase length and boiling temperature at 75% distillation point.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.552-561
• /
• 2006

The single droplet combustion characteristics of diesel fuel and low quality oil with additive oxygenate and paraffin under high ambient temperature and atmospheric pressure were investigated in the study. The results of the study may are concluded as follows: In the combustion of diesel fuel and low quality oil droplet with additive of oxygenate and paraffin. the dimensionless droplet size of $(D/Do)^2$ was linearly decreased with time. A fuel droplet with low boiling temperature additives and in high boiling temperature base fuel evaporates and burns faster than usual base fuel. Especially. these trends were remarkably obtained by decreasing boiling point and increasing blending contents of additives in case of oxygenated agents rather than n-paraffin agents. This rapid burning may result from so-called 'micro-explosion' and its burning intensity varies with the types of additives. The results above may suggest that rapid evaporation of oxygenate additive in the middle stage of combustion can contribute much to combustion improvement of blended fuels.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.1005-1013
• /
• 2010

본 연구는 HCCI 엔진의 운전조건을 고려한 혼합연료의 감압비등 분무제어방법을 평가하기 위하여 수행하였다. 2상영역이 존재하는 혼합연료는 고비점성분의 증발촉진과 함께 연료분무의 급격한 증발을 유도할 수 있는 감압비등분무를 이용함으로써 저온 및 저밀도장에서 혼합기형성과정의 제어가 가능하다. HCCI 엔진은 이러한 분위기조건에서 연료를 조기분사하기 때문에 착화성이 높은 경유와 휘발성이 높은 가솔린성분으로 함유한 혼합연료의 감압비등현상을 이용함으로써 액체연료의 분열, 미립화와 같은 물리적 제어 및 착화연소에 의한 화학적 제어를 실현할 수 있다. 본 연구는 혼합연료의 성분과 몰분율을 주요변수로 설정하여 정적용기 내에 분사된 연료분무의 감압비등현상을 슐리렌 화상 및 Mie 산란광을 촬영한 후, 화상처리과정을 통하여 이루어졌다. 그 결과로 감압비등현상은 비교적 저온 및 저밀도장에서 분무구조가 크게 변화함을 알 수 있었으며, 조기 연료분사시기에서 감압비등분무를 이용한 혼합기형성을 제어함으로써 HCCI 연소에 적용이 가능할 것으로 분석하였다.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.498-506
• /
• 2002

Improvements of fuel properties have become essential for exhaust emission reduction as well as for optimization of directly-related design factors and exhaust gas aftertreatment. In this study, the potential possibility of oxygenated fuel such as ethylene glycol mono-n-butyl ether(EGBE) was investigated for the sake of smoke reduction from diesel engine. Because EGBE include oxygen content approximately 27%, it is a kind of effective oxygenated fuel that the smoke emission of EGBE is reduced remarkably in comparison with commercial diesel fuel, that is, it can supply oxygen component sufficient at high load and speed in diesel engine. And, it was tried to analyze the quantities of the low and high boiling point hydrocarbon among the exhaust emissions in diesel engine. It have been investigated by the quantitative analysis of the hydrocarbon $C_1$~ $C_{6}$ using the gas chromatography. This study was carried out by comparing the chromatogram with diesel fuel and diesel fuel blended EGBE 20vo1-%. The results of this study show that the hydrocarbon $C_1$~C$_{6}$ among the exhaust emission of the mixed fuels are exhausted lower than those of the diesel fuel at the all load and speed. In particular, high boiling point hydrocarbons such as $C_{5}$ and $C_{6}$ were reduced remarkably at high speed and load.d.