• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2141-2145
• /
• 2015

A new broadcasting signal transmission, which can save its channel bandwidth using compressive sensing(CS), is proposed in this paper. A new compression technique, which uses two dimensional discrete wavelet transform technique, is proposed to get high sparsity of multimedia image. A L1 minimization technique based on orthogonal matching pursuit is also introduced in order to reconstruct the compressed multimedia image. The CS enables us to save the channel bandwidth of wired and wireless broadcasting signal because various transmitted data are compressed using it. A $256{\times}256$ gray-scale image with compression rato of 20 %, which is sampled by 10 Gs/s, was transmitted to an optical receiver through 20-km optical transmission and then was reconstructed successfully using L1 minimization (bit error rate of $10^{-12}$ at the received optical power of -12.2 dB).

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.9
• /
• pp.384-391
• /
• 2003

The wideband annular ring slot antenna with concentric radiating structure and low impedance feedline has been presented. This antenna has been analyzed in compensation for FR-4 substrate with relative permittivity 4.3 and thickness 1 mm. As the measured 10 dB impedance bandwidth of the proposed antenna is 127.2%(2.17∼9.76 GHz), its bandwidth is much broader than maximum 82% bandwidth of a conventional annular ring slot antenna. Experimental results from 2 to 10 GHz are shown to be in good agreement with the simulation. And this antenna has a high gain above 4 dBi from 2 GHz to 10 GHz as well as a 24% size reduction and 42% area reduction than a circular slot antenna.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.473-477
• /
• 2015

In this paper, a commercial phosphorescent white light-emitting diode (WLED) visible light communication (VLC) system with an equalization circuit to achieve the high modulation bandwidth was designed and demonstrated. An analytical method to examine the performance of the equalizer was carried out using a general circuit-simulator, PSpice. The equalization circuit was composed of two passive filters with resisters and a capacitor and an active filter with an op-amp. Utilizing our post-equalization technology, the ~3.5 MHz bandwidth of phosphor WLED could be extended to ~25 MHz without using an optical blue-filter. In this VLC system with a single round-type WLED and a single PIN photo-diode, ASK data transmission up to 35 Mbps at a 1m free space distance was obtained. The resulting bit-error-rate was $7.6{\times}10^{-4}$, which is less than the forward error correction (FEC) limit of $3.8{\times}10^{-3}$.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1002-1012
• /
• 2019

360VR content requires short latency, such as immediate response to viewers' viewport changes and high quality video delivery. It is necessary to consider efficient transmission that guarantees the QoE(Quality of Experience) of the 360VR contents with limited bandwidth. Several research has been introduced to reduce overall bandwidth consumption by predicting a user's viewport and allocating different bit rates to the area corresponding to the viewport. In this paper, we propose novel viewport prediction scheme that uses sound source location information of 360VR contents as auditory recognition information along with visual recognition information. Also, we propose efficient transmission algorithm by allocating a bit rate properly based on improved viewport prediction. The proposed scheme improves the accuracy of the viewport prediction and provides high quality videos to tiles corresponding to the user's viewpoint within the limited bandwidth.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.10-17
• /
• 2021

The cymbal transducer is a miniaturized version of the Class V flextensional transducer. It has low resonant frequency and high output pressure characteristics compared with its size. However, since it has high quality factor and low energy conversion efficiency as well, it is often used as an array rather than single. When used as an array, a big change in the frequency characteristics occurs in comparison with that of the single transducer due to the interaction between constituent transducers. In this study, we designed a pattern of cymbal array with a view to having broadband characteristics. Three transducers having different center frequencies were designed first. The designed cymbal transducers were used to construct all possible patterns of a 3 × 3 planar array. After analyzing frequency characteristics of these patterns, based on the results, we derived the most effective pattern to achieve a higher fractional bandwidth. The derived array pattern showed an improvement of the fractional bandwidth by 24.9 % in comparison with the reference model.

• Phonetics and Speech Sciences
• /
• v.14 no.3
• /
• pp.27-40
• /
• 2022

This study identifies distinguishing features and variability of intonation patterns in Korean phonological phrases. Syllable count and segmental content, which are phonological conditions, of the intonation of phonological phrases were examined. Based on the four syllables, the intonation of a phonological phrase can be set to LHLH as the basic form, and syllable count acts as a condition for making a variation. The "3 syllables or less condition" changes the intonation from a curved line to a straight line. Variation occurs in pitch bandwidth and fluctuation according to segmental content. The first segment affects the phonological phrase formation bandwidth, and the following segment affects the pitch fluctuation. If the first segment has [+aspirate], [+tense], [+continuant], the intonation is formed in the high band, otherwise, it is formed in the low band. If the second or after segment in the intonation realized in the high band has [-aspirate], [-tense], [-continuant], the pitch is lowered to the lowest level of the low bandwidth. In the intonation realized in the low band, [+aspirate], [+tense], [+continuant] is blocked by the second descent of LHLH.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.677-682
• /
• 2023

A large number of motors and sensors are used to drive a humanoid robot. In order to solve the wiring problem that occurs when connecting multiple actuators, a controller based on a communication network has been used, and CAN, which is advantageous in terms of cost and a highly reliable communication protocol, was mainly used. In terms of the structure of the controller, a torque control type structure that is easy to implement an advanced algorithm into the upper controller is preferred. In this case, the low communication bandwidth of CAN becomes a problem, and in order to obtain sufficient communication bandwidth, a communication network is configured by separating into a plurality of CAN networks. In this study, a stability analysis on transmission time delay is performed for a multi-motor control system in which high-speed FlexRay and low-speed CAN communication networks are hierarchically connected in order to obtain a high communication bandwidth, and sensor information and driving signals are delivered within the allowed transmission time. The proposed hierarchical network-based control system is expected to improve control performance because it can implement multiple motor control systems with a single network.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.6
• /
• pp.309-318
• /
• 2008

In this paper, we discuss a method for efficiently coding the high-band signal in the split-band coding approach where an input signal is divided into two bands and then each band may be encoded separately. Generally, and especially through the research on the artificial bandwidth extension (BWE), it is well known that there is a correlation between the two bands to some degree. Therefore, some coding gain could be achieved by utilizing the correlation. In the BWE-prediction-based coding approach, using a simple linear BWE function may not yield optimal results because the correlation has a non-linear characteristic. In this paper, we investigate the new coding scheme more in details. A few representative BWE functions including linear and non-linear ones are investigated and compared to find a suitable one for the coding purpose. In addition, it is also discussed whether there are some additional gains in combining the BWE coder with the predictive vector quantizer which exploits the temporal correlation.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1020-1029
• /
• 2006

Realization of high-capacity quality-of-service router needs fair packet schedulers with a lower complexity. Timestamp based fair packet schedulers have the ideal complexity of O(log V), where V is the maximum number of admitted flows, but it has been recently reduced to O(1) using bin concept. However, the latency property was deteriorated and the bandwidth utilization was also declined. In addition, traffic flows requiring strong delay bound may not be admitted. To overcome these problems, this paper proposes a Mini-Bin based Start-Time (MBST) scheduler with variable complexity and evaluates its performance. The MBST scheduler uses the timestamp calculation scheme of start-time based schedulers to enhance the bandwidth utilization and also introduces mini-bin concept to improve the latency, The performance evaluation shows that the proposed scheduler can reduce the complexity of the legacy start-tine based schedulers by $1.8{\sim}5$ times without deteriorating the bandwidth utilization property.