• Journal of information and communication convergence engineering
• /
• 제22권1호
• /
• pp.14-22
• /
• 2024

This study presents the design of a Wilkinson power divider for three-way output ports (WPD3OP), which incorporates a defected ground structure (DGS). An asymmetric power divider is integrated into the output ports of the conventional Wilkinson power divider (WPD), establishing a three-way output port configuration. The DGS introduces periodic or irregular patterns into the ground plane to suppress unwanted electromagnetic wave propagation, and its incorporation can enhance the performance of the power divider, in terms of the power-division ratio, isolation, and bandwidth, by reducing spurious resonances. The proposed design algorithm for an asymmetric power divider for three-way output ports is analyzed via circuit simulations using High-Frequency Simulation Software (HFSS). The results verify the validity of the proposed method. The analysis of the WPD3OP integrated with DGS certifies the achievement of a center frequency of 2 GHz. This confirmation is supported by schematic ideal design simulation results and measurements encompassing insertion losses, return losses, and isolation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.310-314
• /
• 1988

In designing a high performance electrohydraulic control system for a large flexible structure, several flexible structural modes should be taken into account in a range of hydraulic control system bandwidth. The procedures of modeling a flexible mode control system and designing the high pass filter of load pressure feedback are presented. Example analysis varifies the presented analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제19권11호
• /
• pp.1185-1192
• /
• 2008

In this paper, a wideband LC oscillator which is composed of a high voltage switch and a fat dipole antenna was designed and radiation characteristics are analyzed. A Marx generator was used as a high voltage pulse generator of the proposed wideband LC oscillator and $90^{\circ}$ corner reflector was used to obtain high directivity. According to simulated and measured results, 3 dB bandwidth of high voltage switch without fat dipole based on the received power is about 9%(${\lambda}_1=0.7\;m$) and bandwidth Is about 30%(${\lambda}_2=1\;m$) by using the LC oscillator containing high voltage switch and fat dipole. Consequently, fat dipole affects not only radiating power but also operating frequency and bandwidth of the LC oscillator. This study will be useful to determine operating frequency and radiating power when we design LC oscillator which uses a high voltage switch and a fat dipole.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권5호
• /
• pp.35-44
• /
• 2006

Reflective semiconductor optical amplifiers(R-SOAs) were designed with high gain, wide optical bandwidth, high thermal reliability and wide modulation bandwidth in TO-can package for the transmitter of wavelength division multiplexed-passive optical network(WDM-PON) application. Double trench structure and current block layer were introduced in designing the active layer of R-SOA to enable high speed modulation. The injection power requirement and the viable temperature range of WDM-PON system are experimentally analysed in based on Amplified Spontaneous Emission(ASE)-injected R-SOAs. The effect of the different injection spectrum in the gain-saturated R-SOA was experimentally characterized based on the measurements of excessive intensity noise, Q factor, and BER. The proposed spectral pre-composition method reduces the bandwidth of injection source below the AWG bandwidth and thereby avoids spectrum distortion impeding the intensity noise reduction originated from the amplitude squeezing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제18권8호
• /
• pp.930-936
• /
• 2007

In this paper, the high gain and broadband antenna operating for SDMB(Satellite Digital Multimedia Broadcasting) system is realized, The proposed antenna consists of the SAP(Shorted Annular Patch) structure, which inhibits surface-wave and the parasitic SAP element with spacing of $0.25 {\lambda}_0$ in order to improve gain, bandwidth and directivity. The RHCP(Right Hand Circular Polarization) is generated by two slits, which are made along the periphery of the circular patch at the diametrically opposite points, The simulated maximum gain of the proposed antenna is 12.6 dBi, which is better 5.22 dBi than maximum gain of the conventional microstrip patch antenna. The measured maximum gain is 10.5dBi at operating frequency 2.63GHz. Also, the measured impedance bandwidth$(VSWR{\leq}2)$ of the proposed antenna is $360MHz(2.488{\sim}2.848 GHz)$, which is better 300 MHz than the bandwidth of the conventional microstrip patch antenna. The measured HPBW(Half Power Beam Width) of the proposed antenna is $45.8^{\circ}$, and the measured FBR(Front to Back Ratio) is 15.49 dBi, The 3dB axial ratio bandwidth is 220 MHz$(2.54{\sim}2.76 GHz)$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권5호
• /
• pp.3074-3078
• /
• 2014

We implemented a dual-band slot-coupled patch (SCP) antenna for the external access point (AP) of the wireless local area network (WLAN) band. The antennas consist of two radiators on three layers. The first radiator is a slotted bow tie antenna operating at the 2.4-2.483 GHz band. The second radiator is a patch antenna with parasitic elements operating at 4.095-5.845 GHz. The high gain and broad bandwidth is important element of wireless access. To enhance the bandwidth, a coupled feeding was used in the first radiator and a parasitic patch was used in the second radiator. We used a parasitic patch and chock to improve the directivity and isolation in both radiators. The porposed antenna was designed by EM simulation tool and measured. The S11 of the antenna was less than -11dB (VSWR 1.8:1) at operating frequency. The peak gain was more than 6 dBi in the first antenna and more than 8 dBi in the second antenna.

• Journal of KIISE:Information Networking
• /
• 제34권5호
• /
• pp.379-388
• /
• 2007

With proliferation of computer and wireless network technology, it is common to access Internet through wireless network using mobile device. Ratio of using streaming media out of many applications through Internet is increasing not only in wired network but also in wireless network. Streaming media is much bigger than other contents and requires more network bandwidth and more computing resources. However mobile devices hate relatively poor computing resource and low network bandwidth. If media streaming service is provided for mobile devices without any consideration about network bandwidth and computing power, it is hard for the client to get high qualify service. Since mobile device is supported with very limited energy from the battery, media streaming should be adjusted to varying energy state of mobile device in realtime to ensure complete playback of streaming media. In this paper, we propose DFRC to provide high qualify service to mobile client through wireless network by controlling the number of frames transmitted to client based on computing resource and energy state of mobile device.

• The Journal of Korea Robotics Society
• /
• 제12권3호
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.

• Journal of Internet Computing and Services
• /
• 제8권5호
• /
• pp.125-132
• /
• 2007

Transmission mechanisms that include an available bandwidth estimation algorithm and a packet loss differentiation scheme, in general, exhibit higher TCP performance in wireless networks. TCP New Jersey, known as the best existing scheme in terms of goodput, improves wireless TCP performance using the available bandwidth estimation at the sender and the congestion warning at intermediate routers. Although TCP New Jersey achieves 17% and 85% improvements in goodput over TCP Westwood and TCP Reno, respectively, we further improve TCP New Jersey by exploring improved available bandwidth estimation, retransmission timeout, and recovery mechanisms. Hence, we propose TCP New Jersey PLUS (shortly TCP NJ+), showing that under 1% packet loss rate, it outperforms 3% by TCP New Jersey and 5% by TCP Wes1wood. In 5% packet loss rate, a characteristic of high bit-error-rate wireless network, it outperforms other TCP variants by 19% to 104% in terms of goodput even when the network is in bi-directional congestion.

• The Transactions of the Korea Information Processing Society
• /
• 제7권12호
• /
• pp.3923-3932
• /
• 2000

In mobile network, wireless links may be overloaded due to a high concentratioJl of mobile hosts in a given cell. As a result, the required QOS(Quality of Service) cannot be provided to all flows in that cell. So, there exists adaptive applications which can operate with various bandwidth levels. When a wireless link is overloaded, it can adapt by reducing the bandwidths of flows, is referred to as rate adaptation. In this paper, we analyze the performance of existing rate adaptation methods by simulations. The result of simulation experiments shows that average-fair adaptation scheme has very low network overhead but high bandwidth variance of flows, which causes the worse quality of service. We propose a rate adaptation method refined by combining fair adaptation and average-fair adaptation, and shows the refined method can provide lower bandwidth variance of flows by simulations.