• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.411-416
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, high accuracy and wide frequency bandwidth of sensors are important. The focus in this paper is to make a fiber optic sensor for monitoring rotor of magnetic bearing, to design the circuit for detecting optical signal, and to evaluation static and dynamic characteristics of fiber optic sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5827-5831
• /
• 2011

In this paper, 5Ghz microstrip patch antenna for wireless LAN is designed, fabricated, and measured. To obtain wide bandwidth and high gain, antenna parameters such as patch size(W, L), the length of the slot(C), and the slot width(D) are simulated by HFSS(High Frequency Structure Simulator). From these parameters optimized, the microstrip patch antenna is fabricated using FR-4 substrate. The measured results of the antenna are as follows: The center frequency of 5.2 GHz, insertion loss of -41.17dB, bandwidth of 258MHz, and VWSR of 1.1.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.798-801
• /
• 2000

For the performance enhancement of communication system, high quality filters are required. Also a minimization of size of filter is required for the interation of devices in the limited area. Conventional metal filters made of copper can be substituted by high quality high temperature superconducting(HTS) films for better performance. Hairpin type filters have been designed with the center frequency 14 GHz for the size reduction. 3-pole and 4-pole filters centered at 14 GHz with the bandwidth of about 300 MHz were designed and fabricated. With the simulation results, the frequency responses showed low insertion loss and sharp skirts characteristics. The frequency response of HTS 14 GHz fi1ter was measured at 77 K and compared with the simulation results. We have compared YBCO filters and copper filters which were made with the same design rules. Simulated and measured frequency responses reveal that HTS YBCO hairpin type bandpass filters show better performance than copper filters.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1115-1122
• /
• 2023

This study aimed to present reasonable reception bandwidth application standards for the purpose of suppressing metal objects during MRI examinations. For this purpose, T2 contrast images were acquired using high-speed spin echo technology on a phantom made of screws for spinal surgery, and metal objects were detected. In addition, images were obtained by increasing the reception bandwidth from 100 Hz/PX to 800 Hz/PX by 100 Hz/PX. The metal artifacts were determined as the sum of the areas of the signal attenuation area and the signal accumulation area. In addition, Pearson correlation analysis was performed to analyze the pattern of metal artifacts according to imaging variables. As a result, the signal accumulation area did not change significantly as the reception bandwidth increased (p>0.05), but the signal loss area and the area of metal artifacts decreased as the reception bandwidth increased (p<0.05). Interestingly, the area of metal objects decreased to a maximum in the section where the reception bandwidth was increased from 100 Hz/PX to 200 Hz/PX, consistent with the section where the echo spacing was reduced to a maximum due to the increase in reception bandwidth. In addition, the correlation analysis results also showed that the eco spacing was more related to the signal attenuation area and the area of metal objects than to the reception bandwidth. Therefore, if the reception bandwidth is increased for the purpose of reducing metal objects, it is reasonable to set it based on a value that minimizes the echo spacing in consideration of image quality factors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.313-325
• /
• 1996

This paper presents a new architecture for full-search block-matching motion estimation. The architecture is based on linear systolic arrays. High speed operation is obtained by feeding reference data, search data, and control signals into the linear systolic array in a pipelined fashion. Input data are fed into the linear systolic array at a half of the processor speed, reducing the required data bandwidth to half. The proposed architecture has a good scalability with respect to the number of processors and input bandwidth when the size of reference block and search range change.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.116-117
• /
• 2001

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1773-1795
• /
• 2020

Unmanned aerial vehicles (UAVs) network are a very vibrant research area nowadays. They have many military and civil applications. Limited bandwidth, the high mobility and secure communication of micro UAVs represent their three main problems. In this paper, we try to address these problems by means of secure clustering, and a security clustering algorithm based on integrated trust value for UAVs network is proposed. First, an improved the k-means++ algorithm is presented to determine the optimal number of clusters by the network bandwidth parameter, which ensures the optimal use of network bandwidth. Second, we considered variables representing the link expiration time to improve node clustering, and used the integrated trust value to rapidly detect malicious nodes and establish a head list. Node clustering reduce impact of high mobility and head list enhance the security of clustering algorithm. Finally, combined the remaining energy ratio, relative mobility, and the relative degrees of the nodes to select the best cluster head. The results of a simulation showed that the proposed clustering algorithm incurred a smaller computational load and higher network security.

• Journal of Industrial Technology
• /
• v.40 no.1
• /
• pp.19-23
• /
• 2020

In this paper, we proposed a PC-based CNC control system using EtherCAT-based servo drive and I/O device. The default communication of LinuxCNC is a parallel port, and data processing with high bandwidth is impossible. However, it is possible to apply various bandwidth devices through the application of EtherCAT, one of the industrial Ethernet communications with high bandwidth. Therefore, the hardware control method of LinuxCNC was applied through EtherCAT communication from the existing parallel port. Finally, through HAL configuration, I/O device operation check and 3-axis motion control proved the LinuxCNC system with EtherCAT.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.888-908
• /
• 2011

The increasing demand from passengers in vehicles to improve safety, traffic efficiency, and comfort has lead to the growing interest of Wi-Fi based vehicle-to-infrastructure (V2I) communications. Although the V2I system provides fast and cost-effective Internet connectivity to vehicles via roadside Wi-Fi access points (APs), it suffers from frequent handoffs due to the high mobility of vehicles and the limited coverage of Wi-Fi APs. Recently, the Mobile AP (MAP) platform has emerged as a promising solution that overcomes the problem in the V2I systems. The main advantage is that MAPs may yield longer service duration to the nearby vehicles that have similar mobility patterns, yet they provide smaller link capacities than the roadside APs. In this paper, we present a new association control technique that harnesses available connection duration as well as achievable link bandwidth in high-speed vehicular network environments. We also analyze the tradeoff between two association metrics, namely, available connection duration and achievable link bandwidth. Extensive simulation studies based on real traces demonstrate that our scheme significantly outperforms the previous methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.484-491
• /
• 2000

It is necessary to apply SSB modulation method with high bandwidth efficiency to the DS-CDMA mobile communication systems in order to accommodate the increasing number of voice users as well as the broad band and high data rate service in the future. Even though the bandwidth efficiency increases if SSB modulation is applied to BPSK-DS/CDMA, its performance gets degraded because of the increased multiple access interference. Therefore for eliminating the increased multiple access interference, the SSB/BPSK-DS/CDMA with successive interference canceller(SIC) is proposed and its performance and capacity are analyzed. With the limited system bandwidth, it is shown that the SSB/BPSK-DS/CDMA with SIC can accommodate more capacity than the conventional BPSK-DS/CDMA with SIC.