• 한국군사과학기술학회지
• /
• 제20권1호
• /
• pp.81-89
• /
• 2017

This study investigates store separation characteristics of an unmanned aerial vehicle having generic stealth configuration over unsteady flow of an internal bay. Free-drop wind tunnel tests are conducted to simulate bomb releases from an internal weapons bay while high-speed camera images are taken. The images are analyzed to examine the effects of flow velocity, angle of attack, flap deflection and the ejector force application on the store separation trajectories. For the free-drop wind tunnel tests, Froude Scaling is applied to match the dynamic similarity for the bomb model, and the ejector force is simulated by using small pneumatic cylinders. The results indicate that the test bomb model safely separates from the internal bay at the given test conditions and configurations. It is also observed that the effects of the flow velocity and ejector force application have greater impacts on the separation trajectories than those of angle of attack and flap deflection.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1112-1118
• /
• 2000

The objective of this study is to increase lift and decrease drag of an airfoil at high angles of attack by delaying flow separation with piezo-ceramic actuators. The airfoil used is NACA 0012 and its chord length is 0.3m. An experiment is performed at the freestream velocity of 15m/s at which the Reynolds number based on the chord length is $2{\times}10^5$. Seven rectangular actuators are attached to the airfoil surface and move up and down based on the electric signal. Drag and lift are measured using an in-house two-dimensional force-balance and the surface pressures are also measured. At the attack angle of $16^{\circ}$, the separation point is delayed downstream due to momentum addition induced by the movement of the actuators. Lift is increased by 10%, drag is reduced by 37%, and the efficiency is increased up to 170%. The flow fields with and without control are visualized using the smoke-wire and tuft techniques.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.639-646
• /
• 2005

As the internet communication is prevalent in recent years, it becomes quite possible to monitor and control some mechanical plants from the remote place through the TCP/IP communication. Such a concept is expected to be applied to many industrial systems fur easy maintenance and trouble shooting as well as various kinds of expensive test equipments fo. sharing. Synthetic jet actuate.(SJA) is a kind of high-lifting device to prevent flow separation at high angle of attack and its use for flow control has received a great amount of attention. In this research, remote control and data monitoring system for SJA wind tunnel test is implemented by TCP/IP communication with DSP as a embedded web server. From the tests performed with embedded server, it showed the possibility of reliable remote control system design utilizing the internet communication.

• Journal of Ship and Ocean Technology
• /
• 제8권2호
• /
• pp.1-12
• /
• 2004

To keep the ocean environment from pollutions, strict international requirements on the controllability are arisen to the VLCC. Especially in low speed operations near the harbor, the VLCC is often supported by tug to replenish the insufficient rudder force. When water jet is blown to the flapped rudder, the Coanda effect induces a high-lift force by delaying stall and re-enforcing circulation in a large angle of attack (Lachmann 1961, Ahn 2003). Based on numerous research efforts, the rudder system supported by the Coanda effect was devised and its performances were evaluated in the towing tank for a large VLCC model. Hydrodynamic forces acting on the rudder system were measured with a water jet blowing on the rudder surface and compared with those acting on a conventional rudder. The effectiveness of the new rudder system was proven through an experimental evaluation.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.125-129
• /
• 2005

Flow control has been performed using synthetic jet on NACA23012. In order to improve aerodynamic performance, synthetic jet is located near separation paint on airfoil with leading edge droop and plain flap. The flow control using synthetic jet shows that stall characteristics and control surface performance can be improved through resizing separation vortices. Stall is delayed and stall characteristics are improved when synthetic jet is applied from separation region of leading edge droop. Control surface effectiveness is increased and lift is increased when synthetic jet applied at the flap leading edge region. The results show that aerodynamic characteristics can be improved through leading edge droop with synthetic jet at near separation and plain flap with synthetic jet at the flap leading edge. The combination of synthetic jet and simple high lift device is as good as fowler flap system.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.109-117
• /
• 2002

옆미끄럼이 있는 조건에서 LEX를 갖는 삼각날개의 와류 특성을 유동의 가시화에 의한 실험적 방법으로 연구하였다. 모델은 $65^{\circ}$ 후퇴각의 갖는 평판 날개이다. 자유 유동속도는 6.2 m/s이며, 이 속도와 날개뿌리 시위를 기준으로 한 레이놀즈 수는 $4.4\times10^5$ 이다. 받음각 범위와 옆미끄림각 범위는 각각 $16^{\circ}\sim28^{\circ}$와 $0^{\circ}\sim-15^{\circ}$ 이다. 미세수적과 레이저 평면광에 의한 가시화는 오공 프로브에 의한 측정으로부터 얻을 수 없었던 보다 자세한 와유동 구조를 관찰 할 수 있도록 하였다. 옆미끄럼각이 있는 경우, 바람쪽은 LEX 와류와 날개 와류의 상호작용과 붕괴가 촉진되는 반면, 바람반대쪽은 두 와류의 상호작용과 붕괴가 억제되었다.

• 한국시뮬레이션학회논문지
• /
• 제27권1호
• /
• pp.33-38
• /
• 2018

본 연구에서는 선유도 중어뢰의 전술 효과도 예측을 위하여 개발한 교전수준 시뮬레이터에 대해서 시뮬레이터 개발에 적용된 개념 및 구성요소 모델에 대해서 소개하고 있다. 특히 어뢰의 공격문제 해결을 위하여 기하학적 모델에 따른 해(Closed-form solution)를 도출하였고, 어뢰의 공격유도 방법에 비례항법 유도를 적용하여 구현하였다. 표적함에 대해서는 속도와 소음의 상충관계로 인한 피탐 가능성을 고려하였다. 어뢰의 초기위치에 따른 공격 소요 시간을 계산하고 이를 도시화하는 과정을 통하여 도출된 해의 정확성을 확인 할 수 있었고, 현실적인 공격유도 방법 및 소음원 모사를 통하여 시뮬레이터 충실도를 높일 수 있었다. 시뮬레이터는 다양한 전술상황을 가정하여 결과를 분석 할 수 있도록 자유도가 높게 개발되었으며, 구성요소 궤적 분석 및 전방위 요격 성공률 분석이 가능하여 전장 상황의 흐름을 파악하고 전술에 대한 이해를 높이는데 도움이 된다.

• Advances in aircraft and spacecraft science
• /
• 제7권3호
• /
• pp.215-228
• /
• 2020

As is shown in the paper, the Koltunov-Rzhanitsyn singular kernel of heredity (when constructing mathematical models of the dynamics problem of the hereditary theory of viscoelasticity) adequately describes real mechanical processes, best approximates experimental data for a long period of time. A mathematical model of the problem of the flutter of viscoelastic plates moving in a gas with a high supersonic velocity is given. Using the Bubnov-Galerkin method, discrete models of the problem of the flatter of viscoelastic plates flowed over by supersonic gas flow are obtained. A numerical method is developed to solve nonlinear integro-differential equations (IDE) for the problem of the hereditary theory of viscoelasticity with weakly singular kernels. A general computational algorithm and a system of application programs have been developed, which allow one to investigate the nonlinear dynamic problems of the hereditary theory of viscoelasticity with weakly singular kernels. On the basis of the proposed numerical method and algorithm, nonlinear problems of the flutter of viscoelastic plates flowed over in a gas flow at an arbitrary angle are investigated. In a wide range of changes in various parameters of the plate, the critical velocity of the flutter is determined. It is shown that the singularity parameter α affects not only the oscillations of viscoelastic systems, but the critical velocity of the flutter as well.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.113-120
• /
• 2011

Fins are widely used for roll stabilization of passenger ferries and high performance naval ships, among others. The Coanda effect is noticeable when a jet stream is applied tangentially to a curved wing surface since the jet can augment the lift by increasing the circulation. The Coanda effect has been found useful in various fields of aerodynamics and speculated to have practical applicability in marine hydrodynamics where various control surfaces are used to control motions of ships and the other offshore structures. In the present study, numerical computations have been performed to find proper jet momentum coefficients $C_j$ and trailing edge shapes suitable for the application of the Coanda effect to a stabilizer fin. The results show that the lift coefficient of the modified Coanda fin at the zero angle of attack ${\alpha}$ identically coincides with that of the original fin at ${\alpha}\;=\;25^{\circ}$ when Coanda jet is supplied at the rate of $C_j$ = 0.1. It is also shown that a fixed type fin stabilizer utilizing the Coanda effect can be implemented without changing the fin angle to actively control the motions of ships and the other offshore structures.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.346-351
• /
• 2017

본 연구에서는 램 구조물의 각도와 노즐 면적 대비 램 구조물 면적비의 변화에 따른 이차목 디퓨저의 유동 특성에 대한 수치적 연구를 진행하였다. 램 구조물 각도가 증가함에 따라 램 구조물에서 경사 충격파가 강하게 발생하여 모사할 수 있는 고도가 낮아지고 이차목에서의 압력 회복 지점이 뒤로 밀리는 것을 확인하였다. Blockage Ratio가 증가함에 따라 램 구조물 뒤쪽에서 발생하는 재순환 영역이 커지고, 디퓨저 수축부에서 박리가 발생하고, 모사 고도에는 영향이 없다는 것을 확인하였다.