• 제목/요약/키워드: High Acoustic Quality

검색결과 151건 처리시간 0.027초

근거리 수중 광무선 통신을 위한 주파수 변조 기반 오디오 전송 시스템 연구 (A study on the Frequency Modulation-based Audio Transmission System for Short-range Underwater Optical Wireless Communications)

  • 김연주;손경락
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권1호
    • /
    • pp.166-171
    • /
    • 2012
  • 본 논문에서는 가시광 LED를 이용한 근거리 수중 광무선 통신 기술을 제안하였다. 수중 통신을 위한 기존 음향 시스템의 대안으로 부상하는 가시광 LED 통신은 고품질의 높은 통신 속도를 보장한다. 수중에서 근거리 통신을 위하여 주파수 변조 방식을 적용한 광 무선 오디오 시스템을 개발하였으며 CD4046B 위상잠김루프를 이용하여 주파수 변조와 복조 회로 부분을 구현하였다. 수조내에서 송신단과 수신단을 30 cm 떨어뜨린 후 100 kHz의 변조 중심 주파수에서 오디오 신호를 전송하여 성공적으로 수신됨을 확인하였다.

고속.지능형 마이크로머시닝을 위한 진단시스템 및 특성평가 (Development of Diagnosis System for Intelligent High-Speed Micro-Machining and Evaluation of Micro-Machining Characteristics)

  • 김흥배;이우영;최성주
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.993-998
    • /
    • 1997
  • The advanced technology of micro-machining is starting to penetrate our lives. This technology, with which it is possible to make micro-structures by means of processing on the order of nm (micrometer = 1/1,000 mm) or less, is realizing machines that were only part of our wildest imagination. However, the fact is that many issues remain in the quest for a variety of applications. With the advent of computing technologies, information technologies, and telecommunications technologies, we foresee the need for new approaches in design, process, and the use of materials, technologies, and people in a globalized manufacturing enterprise. A new thinking paradigm is needed to focus on quality of service on the products we design and manufacture. Factories in different regions need to be co-ordinated through use of the state-of-the-art information on productivity, diagnostics, and service evaluation of manufacturing systems could be shared among different locations and partners. In this research, We develope the internet based Diagnosis system for micro machining and evaluate its characteristics by using mechatronic sensor like Dynamometer, acoustic emission, Acceleration sensor, micro phone, vision, infra-red thermometer.

  • PDF

철도교량 설계 지반조사를 위한 고분해능 수면 탄성파반사법의 응용 사례 (High Resolution Hydroacoustic Investigation in Shallow Water for the Engineering Design of Railroad Bridge)

  • 김중열;;김유성;김기석
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.231-238
    • /
    • 2001
  • To investigate the underground structure of shallow water, Han-river near Yangsou-Ri, high resolution hydroacoustic measurements were carried out for the engineering design of railroad bridge. The acoustic source was a Boomer with an energy of 90 to 280J and in a frequency range up to about 16KHz. The reflected signals were received by using both traditional hydrophones(passive element) and a specially devised receiver unit(active element) mainly composed of piezofilms and preamplifier. They are connected to the "SUMMIT" data acquisition system(DMT-GeoTec company), where the sampling interval was set to 1/32㎳. The source position was continuously monitored by a precision DGPS system whose positioning accuracy was on the order of loom. For the quality control purposes, two different source-receiver geometries were taken. That is to say, the measurements were repeated along the profile everytime depending on the different source energy(175J, 280J), the receiving elements(passive, active) and two different source-receiver geometries. It was shown that the data resolution derived from a proper arrangement with the active hydrophone could be greatly enhanced and hence the corresponding profile section caused by the regular data processing system "FOCUS" accounted excellently for the underground formation below the shallow water.w the shallow water.

  • PDF

체적탄성파 공진기 브라그 반사층 적용을 위한 텅스텐 박막의 미세구조 조절에 대한 연구 (Microstructure Control of Tungsten Film for Bragg Reflectors of Thin Film Bulk Acoustic Wave Resonators)

  • 강성철;이시형;박종완;이전국
    • 한국세라믹학회지
    • /
    • 제40권3호
    • /
    • pp.268-272
    • /
    • 2003
  • 직류 마그네트론 스퍼터링법을 이용하여 증착압력과 기판온도변화에 따른 텅스텐 박막의 미세구조 변화에 대하여 연구하였다. 기판온도 40$0^{\circ}C$에서 증착 압력의 감소에 따라 텅스텐 박막의 미세구조가 zone I에서 zone T로 변화하였다. 텅스텐 박막의 미세구조 비저항과 결정배향성은 상관관계를 보였으며. 미세구조가 zone T 영역에서 낮은 비저항(10$\times$$10^{-6}$ $\Omega$-cm) 과 99%의 (110)면 우선 배향성을 나타내었다. zone T 영역에 해당하는 미세구조를 지니는 텅스텐 박막을 이용한 박막형 공진기는 텅스텐 박막의 높은 탄성저항과 매끈한 표면으로 인해 494의 $Q_{s}$와 5.50%의 $K_{eff}$$^{2}$ 값의 우수한 공진특성을 보였다....

전자코를 사용한 가열처리 야자유의 판별 (Discrimination of the Heated Coconut Oil using the Electronic Nose)

  • 한기영;오세연;김정환;윤예리;노봉수
    • 한국식품과학회지
    • /
    • 제38권1호
    • /
    • pp.16-21
    • /
    • 2006
  • 본 연구는 야자유를 190, $220^{\circ}C$에서 24시간 가열한 후 6개의 MOS로 구성된 전자코로 산패정도를 판별하였다. 주성분분석 결과 제1주성분 값이 열처리 시간에 따라 +0.952에서 0.325로 감소하였다. 가열 온도를 높임에 따라 야자유의 산패정도도 증가하였다. 또 다른 방법에 하나로 GC를 바탕으로 한 SAW센서가 부착된 전자코를 사용한 결과 후각이미지가 뚜렷하게 차이가 나는 것을 보여주었다. 160, $220^{\circ}C$에서 가열한 야자유로부터 휘발 성분에 대한 GC peak의 수와 넓이가 가열온도와 가열 처리 시간에 따라 증가함을 보여주었다. 이러한 방법은 신속하면서도 곧바로 알기 쉽게 데이터를 이미지화함으로써 가열 처리된 야자유의 휘발성분을 전자코로 신속하고 간편하게 분석하여 가열 처리 정도가 예측 가능하였다.

위상 일치와 가변 지수 감쇠 가중치 부여 방법이 적용된 가상 저음 시스템 (Phase-matched Harmonic Generation and Variable Slope Exponential Weighting for Virtual Bass System)

  • 문현기;박영철;황영수
    • 방송공학회논문지
    • /
    • 제21권6호
    • /
    • pp.889-898
    • /
    • 2016
  • 가상 저음 시스템은 기본 주파수 성분의 배음을 생성하여 스피커의 저역 재생 대역을 확장하는 방법으로 소형 스피커에 널리 사용된다. 가상 저음 시스템의 주관적인 성능은 배음의 가중치 부여 방법과 관련이 높기 때문에, 기존 연구에서는 지수 감쇠 가중치 부여 방법과 음색 매칭 방법 등 다양한 가중치 부여 방법이 제안되었다. 그러나 생성한 배음과 기존 신호간의 위상을 맞추지 않을 경우 정확한 가중치 부여가 불가능하다. 본 논문에서는 기존 가중치 부여 방법의 한계점을 분석하고 이를 개선한 가중치 부여 방법을 제안하였다. 제안한 방법은 생성한 배음의 위상을 기존신호의 위상과 일치시키고, 기본 주파수에 따라 배음 가중치를 가변적으로 부여하는 방법이다. 기존 가상 저음 시스템과 객관 및 주관 비교 평가를 수행한 결과, 위상 일치 방법은 자연스럽고 효과적인 저역강화에 필수적임을 확인하였으며, 제안한 배음 가중치 부여 방법은 제한된 상황에서 기존 가중치 부여 방법보다 효과적임을 확인하였다.

성대구증과 궁형성대의 발성치료의 효과 -증 례 보 고- (Treatment Effect of Voice Therapy for Sulcus Vocalis and Vocal Bowing -4 Case Reports-)

  • 남도현;최성희;최재남;최홍식
    • 대한후두음성언어의학회지
    • /
    • 제16권1호
    • /
    • pp.68-75
    • /
    • 2005
  • The treatment of sulcus vocalis and vocal bowing has been commonly used Thyroplasty Type surgery or injection within vocal folds such as Teflon, silicone, collagen. However, and treatment has not been acquired satisfactory treatment effect. This study was conducted to demonstrate voice therapy effect using singer's vocal technique and respiratory training. 4 patients (1 male, 3 females) with sulcus vocalis or bowing, with or without scar were selected for this study and we compared with acoustic, aerodynamic measures and stroboscopy observation before and after voice therapy. The results showed that 1) case 1 (48yr, male) with sulcus vocalis decreased F0 (Fundamental Frequency), increase CQ(Close Quotient) and high degree of satisfaction but not improved voice quality after voice therapy. 2) case 2(19yrs, femal) with mild sulcus vocalis improved as normal voice quality after voice therapy. 3) case 3(38yrs, female) with functional bowing showed abnormalvocal contact before therapy whereas CQ was increased after voice therapy. 4) case 4(27yrs, female) with vocal atrophy and vocal bowing changed normal range of Fo and increased CQ after voice therapy. Even though contact area of both vocal folds was increased and lowered F0 after voice therapy, current outcomes revealed that normal voice quality was not regained. These results might signify that it was difficult that vocal folds couldn't be recovery of symmetry and viscoelastic property of mucosal wave through voice therapy. However, it was difficult for this study to maintain voice therapy so that evaluate effect of voice therapy for long-term. Further study will be needed to long-term follow-up for voice therapy with these patients.

  • PDF

음악감상에서의 음질 평가를 위한 한국어 어휘의 의미론적 속성 분석 (Analysis of Semantic Attributes of Korean Words for Sound Quality Evaluation in Music Listening)

  • 이은영;유가을;이영미
    • 인간행동과 음악연구
    • /
    • 제21권2호
    • /
    • pp.107-134
    • /
    • 2024
  • 본 연구는 음악감상 시 지각하는 음질(sound quality)을 평가할 때, 어휘를 통한 평가가 음악 유형에 따라 달라지는지 분석하여, 음질 평가 어휘의 의미론적 속성에 대한 기초 자료를 제공하고자 하였다. 평균 9.4년의 전문 훈련을 받은 20-30대의 음악 전공자 31명이 참여하였고, 각 참여자는 성부수와 악기의 소리 산출 방식(악기군)에 따라 구성된 9개 음악을 듣고 음질을 나타내는 18개 의미단어 쌍을 평가하였다. 요인 분석을 통해 동일 요인에 영향을 받는 단어들을 그룹화하였고, 다변량 분산 분석을 통해 각 요인 그룹별로 성부 수와 악기군에 따른 차이를 확인하였다. 또한, 유의한 차이를 보이는 의미 단어 세트를 사용해 레이더 차트를 그려 각 음악별 차이를 시각적으로 분석하였다. 연구 결과, 4개 요인이 추출되었으며, '부드러운-딱딱한', '둔한-날카로운', '지저분한-정돈된', '낮은- 높은'의 단어 쌍이 음악 유형에 따라 유의한 차이를 보였다. 이 4개 단어 쌍을 바탕으로 작성된 레이더 차트는 각 음악에 대한 음질 평가를 구분하는 데 효과적이었다. 이 결과는 한국어 기반 음질평가 어휘 개발 시, 국외 연구에서 보고된 범주와는 다른 구조의 체계가 필요하며, 언어적·문화적 요인의 반영이 중요함을 시사한다. 또한, 교차 감각 대응(cross-modal correspondence)에 기반한 어휘 범주 중에서도 음향적 속성에 민감한 범주가 존재함을 확인하였다. 본 연구는 언어적·문화적 속성과 더불어 음질에 영향을 미치는 음악 요인을 반영할 수 있는 음질 평가 어휘 개발에 필요한 기술자료를 제공할 것으로 기대된다.

Bridgeman 성장 [011] 분극 Mn:PIN-PMN-PT 압전단결정의 물성 분포 연구 (A Study on Property Distribution of [011] Poled Mn:PIN-PMN-PT Single Crystals Grown by Bridgeman Method)

  • 임수현;제엽;조요한;이상구;서희선
    • 한국전기전자재료학회논문지
    • /
    • 제37권4호
    • /
    • pp.412-419
    • /
    • 2024
  • Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg2/3Nb1/3)O3-PbTiO3 (Mn:PIN-PMN-PT) single crystals, which exhibit improved phase transition temperatures and coercive field properties compared to Pb(In1/2Nb1/2)O3-Pb(Mg2/3Nb1/3)O3-PbTiO3 (PIN-PMN-PT) single crystals, are expected to be utilized in high-power acoustic transducers. Bridgeman method, growing single crystals along the axial direction from melt, is most widely used method for single crystal growth with large size and high quality. However, single crystal boules grown by the Bridgeman method demonstrate a PT compositional variation, giving rise a distribution of crystal structure and material properties along the growing axis. To employ piezoelectric single crystals grown by the Bridgeman method for acoustic transducers, it is essential to investigate their overall property distribution. In this study, the compositional distribution and property variation of Mn:PIN-PMN-PT single crystals grown by the Bridgeman method was investigated. Measured compositional distribution of PT was from 29% to 32.5% in the Rhombohedral crystal region of the boule. Two types of specimen, [011]-poled Mn:PIN-PMN-29PT and Mn:PIN-PMN-32PT single crystals, were fabricated and tested to obtain full property variation at both ends of the Rhombohedral crystal region. The properties related to the 32 directional vibration mode and the properties related to high-power driving were measured to confirm the overall distribution of properties by composition.

SAW 대역 통과 필터용 ZnO 박막의 특성 개선 연구 (Performance Improvement of ZnO Thin Films for SAW Bandpass Filter)

  • 이승환;강광용;유윤식
    • 한국전자파학회논문지
    • /
    • 제25권12호
    • /
    • pp.1219-1227
    • /
    • 2014
  • 펄스 레이저 증착(Pulsed laser Deposition: PLD) 및 RF 스퍼터링 증착(Sputtering Deposition)의 단계적 적용을 통해, 표면탄성파 대역 통과 필터(Surface Acoustic Wave Bandpass Filter: SAW-BPF)용 ZnO 박막을 성장시켰다. PLD 방법으로 성장된 ZnO 박막위에 RF sputtering 방법을 사용하여 ZnO 박막을 재증착시켰으며, 성장된 ZnO 박막의 물성을 분석하기 위하여 XRD, SEM 및 AFM 분석장비를 사용하였다. 두 가지 증착 방법이 단계적으로 적용되어 성장된 ZnO 박막의 경우, 결정성과 배향성이 우수하게 유지되면서 표면거칠기가 향상되었다. 분석 결과, ${\omega}$-scan의 반치폭과 표면거칠기의 RMS 값은 각각 $0.79^{\circ}$와 1.108 nm였다. 그리고 성장된 양질의 ZnO 박막을 사용하여 SAW-BPF를 제작하여 측정한 결과는 응답 특성의 중심주파수가 260.8 MHz, 대역폭은 2.98 MHz, 그리고 삽입손실은 36.5 dB이었다.