• 한국식품저장유통학회지
• /
• 제12권6호
• /
• pp.540-545
• /
• 2005

수확 후에 실시되는 고 이산화탄소(60및 $100\%$)의 전처리(3, 6, 12시간)가 '일천백봉' 복숭아의 상온 유통 중 신선도 및 부패에 미치는 영향을 조사하였다. $60\%$ 이상의 이산화탄소를 6시간 이상 전처리할 경우 상온 유통 중 호흡, 에틸렌 발생, 과피 변색 및 연화 현상이 둔화되었으며 유통기한 중 조직감이 향상되었다. 상온에서의 부패 현상도 $60\%$ 및 $100\%$를 6시간 이상 처리함으로써 크게 억제시킬 수 있었다. 복숭아과실의 가용성 고형분 함량은상온 유통중 변화하지 않았으며 고 이산화탄소 처리에 의한 영향 또한 없으나, 관능 실험 결과 단맛 지수는 무처리에 비해 처리구가 높은 것으로 나타났다. 특히 $60\%$를 6시간 처리한 과실이 조직감과 단맛 지수가 가장 높았고 전반적인 품질지수도 가장 좋았다. $100\%$ 농도의 경우 과피 변색, 호흡, 에틸렌 발생, 연화 및 부패 억제에는 효과적이나 3시간 처리만으로도 과육에 이산화탄소가 잔류하여 이취를 발생시키므로 복숭아 과실에 부적합하였으며 $60\%$ 농도 또한 6시간을 초과하여 처리할 경우 이산화탄소가 잔류되어 전반적인 선호도가 낮았다. 따라서 '일천백봉' 복숭아의 경우, $60\%$ 이산화탄소를 6시간 동안 전처리 함으로써 상온 유통되는 과실의 변색, 연화, 부패, 식미감 감소를 효과적으로 억제시킬 수 있을 것으로 판단되었다.

• Preventive Nutrition and Food Science
• /
• 제22권2호
• /
• pp.131-137
• /
• 2017

Maximum production of isoquercetin and quercetin simultaneously from rutin by subcritical water hydrolysis (SWH) was optimized using the response surface methodology. Hydrolysis parameters such as temperature, time, and $CO_2$ pressure were selected as independent variables, and isoquercetin and quercetin yields were selected as dependent variables. The regression models of the yield of isoquercetin and quercetin were valid due to the high F-value and low P-value. Furthermore, the high regression coefficient indicated that the polynomial model equation provides a good approximation of experimental results. In maximum production of isoquercetin from rutin, the hydrolysis temperature was the major factor, and the temperature or time can be lower if the $CO_2$ pressure was increased high enough, thereby preventing the degradation of isoquercetin into quercetin. The yield of quercetin was considerably influenced by temperature instead of time and $CO_2$ pressure. The optimal condition for maximum production of isoquercetin and quercetin simultaneously was temperature of $171.4^{\circ}C$, time of 10.0 min, and $CO_2$ pressure of 11.0 MPa, where the predicted maximum yields of isoquercetin and quercetin were 13.7% and 53.3%, respectively. Hydrolysis temperature, time, and $CO_2$ pressure for maximum production of isoquercetin were lower than those of quercetin. Thermal degradation products such as protocatechuic acid and 2,5-dihydroxyacetophenone were observed due to pyrolysis at high temperature. It was concluded that rutin can be easily converted into isoquercetin and quercetin by SWH under $CO_2$ pressure, and this result can be applied for SWH of rutin-rich foodstuffs.

• 전기화학회지
• /
• 제24권4호
• /
• pp.120-132
• /
• 2021

기존 LiCoO₂의 고전압 사용의 제약에 따른 용량적 한계와 코발트 원료의 높은 가격을 해결하기 위하여 high-Nickel에 대한 개발이 활발히 진행되고 있지만 Ni 함량의 증가에 따른 구조적 안정성의 저하에 의한 전지 특성의 저하는 상용화를 지연시키는 중요한 원인이 되고 있다. 이에 Ni-rich 삼성분계 양극소재 LiNi_0.6Co_0.2Mn_0.2O₂의 고안정성을 높이고자 전구체에 균일한 이종원소 Ti를 치환을 위해서 나노크기의 TiO₂ 서스펜젼 형태 소스를 사용하여 전구체 Ni_0.6Co_0.2Mn_0.2-x(OH)₂/xTiO₂를 제조하였다. Li₂CO₃와 혼합하고, 열처리 후 양극활물질 LiNi_0.6Co_0.2Mn_0.2-xTi_xO₂ 합성하여 Ti 함량에 따른 물리적 특성을 비교하였다. Field Emission Scanning electron Microscope(FE-SEM) 및 Energy Dispersive Spectroscopy (EDS) mapping 분석을 통해 Ti 치환된 구형의 전구체와 입자 크기 측정을 통해 균일한 입자크기를 가지는 양극 활물질 제조를 확인하였고, 내부치밀도와 강도가 증가함을 확인 하고, X-ray Diffractometry (XRD) 구조 분석과 Inductively Coupled Plasma Mass Spectrometry (ICP-MS) 정량분석을 통해 Ti 치환된 양극활물질 제조 및 고온, 고전압에서 충·방전을 지속하더라도 효과적으로 용량이 유지됨을 확인하였다.

• 한국연소학회지
• /
• 제14권2호
• /
• pp.1-9
• /
• 2009

New way to effectively capture $CO_2$ in coal fired power plant is the combustion of coal using oxy-fuel technology. Combustion characteristics of Minco sub-bituminous coal at oxy-fuel conditions using TGA and drop tube furnace (DTF) were included activation energy about the char burnout, volatile yield and combustion efficiency of raw coal, the porosity of pyrolyzed char and fusion temperature of by-product ash. TGA result shows that the effect of $CO_2$ on combustion kinetics reduces activation energy by approximately 7 kJ/mol at air oxygen level(21% $O_2$) and decreases the burning time by approximately 16%. The results from DTF indicated similar combustion efficiency under $O_2/CO_2$ and $O_2/N_2$ atmospheres for equivalent $O_2$ concentration whereas high combustion efficiency under $O_2/N_2$ than $O_2/CO_2$ was obtained for high temperature of more than $1,100^{\circ}C$. Overall coal burning rate under $O_2/CO_2$ is decreased due to the lower rate of oxygen diffusion into coal surface through the $CO_2$ rich boundary layer. By-product ash produced under $O_2/CO_2$ and $O_2/N_2$ was similar IDT in irrelevant to $O_2$ concentration and atmospheres gas during the coal combustion.

• 한국환경과학회지
• /
• 제12권9호
• /
• pp.987-996
• /
• 2003

In this study, we analyzed the relationship between the time-variation trend of air pollution concentration index and the meteorological conditions with CO(carbon monoxide) concentration and meteorological observation data in high-CO episode days. CO is a representative automobile air pollutant. The results are as follows; 1. Most of the high-CO episode days within 30 classes appeared in winter season. 2. Most of them appeared under the surface weather conditions with east-west high-pressure system. The surface winds in this high-pressure area were very light. 3. The high-CO episode days were due to unusual accumulation within urban atmosphere in the morning. 4. The Atmospheric stabilities were more stable, and then the wind-ventilation conditions were worse than yearly mean atmospheric condition in Daegu.

• 공업화학
• /
• 제29권2호
• /
• pp.185-190
• /
• 2018

Bicyclo[2.2.1]hepta-2,5-diene (norbornadiene)의 이량체는 고에너지밀도 연료로 사용 가능하다. 본 연구의 목적은 Co 담지가 HY 제올라이트 촉매의 산특성에 미치는 영향과 norbornadiene의 이량화 반응에 미치는 영향을 고찰하는 것이다. HY 제올라이트 촉매에 코발트를 담지하면 산점의 양은 큰 변화가 없으나 산 세기는 약해졌다. 이는 $Br{\ddot{o}}nsted$산의 감소와 Lewis산의 증가에 기인한 것으로 볼 수 있다. HY 제올라이트와 Co/HY를 촉매로 사용하여 norbornadiene 이량화 반응을 수행한 결과, Co/HY 촉매는 HY 제올라이트 촉매보다 더 높은 norbornadiene 전환율과 norbornadiene 이량체수율을 나타내었다. Norbornadiene 이량화 반응에서 Co/HY 촉매의 활성이 HY 촉매보다 더 높은 것은 Lewis 산점의 역할이 더 크기 때문으로 해석할 수 있다. Co/HY 촉매를 이용하여 제조한 norbornadiene 이량체의 밀도와 발열량이 문헌에 알려진 값과 잘 일치하며, 본 연구에서 제조한 norbornadiene 이량체가 고에너지밀도 연료로서 사용 가능하다는 것을 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제10회 하계 Workshop
• /
• pp.59-101
• /
• 2002

PVDF is good material for a hollow fiber membrane with high porosity and excellent hydrophobicity. Asymmetric PVDF hollow fiber membranes were prepared by the Loeb-Sourirajan phase inversion method. Asymmetric PVDF hollow fiber membranes could be controlled in pore size and porosity using various additives(LiCl, ZnCl$_2$) and internal coagulants (water, EtOH/water, and DMAc/water mixture). $CO_2$removal efficiency of asymmetric PVDF hollow fiber membranes was 1.2 times high than that of commercialized PP hollow fiber membranes at MEA 5wt% solution. $CO_2$flux of asymmetric PVDF hollow fiber membranes was 2.5 times higher than that of commercialized PP hollow fiber membranes. $CO_2$removal efficiency and absorption rate of asymmetric PVDF hollow fiber membranes were 30 times higher than those of packed column at absorbent $H_2O$. $CO_2$flux of asymmetric PVDF hollow fiber membranes at MEA 5wt% solution was 48 times higher than that of pure water. In the case of MEA 5wt% solution used as an absorbent, the $CO_2$absorption rate and removal efficiency of PVDF hollow fiber membrane were 2.3 times higher than that of a packed column.

• Journal of Magnetics
• /
• 제18권2호
• /
• pp.155-158
• /
• 2013

FeCoB films were being prepared on a Ru underlayer by using the oblique incidence of sputtered and back-scattered particles which have a high in-plane magnetic anisotropy field $H_k$ above 400 Oe. It is suitable to attain such deposition condition when facing targets sputtering system. The in-plane X-ray diffraction analysis clarified that there is anisotropic residual stress which is the origin of the high in-plane magnetic anisotropy. The directional crystalline alignment and inclination of crystallite growth were also observed. Such anisotropic crystalline structures may affect the anisotropic residual stress in the films. The B content of 5.6 at.% was appropriate to induce such anisotropic residual stress and $H_k$ of 410 Oe in this experiment. The film with B content of 6 at.% possessed large saturation magnetization of 22 kG and high $H_k$ of 500 Oe. The film exhibited high ferromagnetic resonance frequency of 9.2 GHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 1995

LiCoO$_2$is a electrode material of Li ion Cell which is expected as the cell with a very high electric charge density. The recent study is mainly to focused on a high power secondary cell. If very thin Li ion Cell can be made in the scale of IC substrate it can be a electric souse in IC chip , micro machine or very thin electrical display etc. LiCoO$_2$thin film can be made by CVD, Laser ablation, E-Beam, ton Beam process, sputtering etc. But to make the material with a high quality for a cell is difficult as the electrode in cell have the fitable ratio in components and a lattice structure of bulk etc. In this study, LiCoO$_2$is made by R.F magnetron sputtering with the variance of substrate temperature and oxygen partial pressure etc. In the substrate temperature of 600$^{\circ}C$ and the oxygen rate of 10%, we can acquire the good thin film LiCoO$_2$compared wish a bulk material.

• 한국분무공학회지
• /
• 제19권1호
• /
• pp.33-39
• /
• 2014

Due to persist of high oil prices, LPG price stabilization and CNG modification project will be conducted. Present study describes the fuel efficiency and $CO_2$ emission characteristics on driving cycle mode and ignition advance condition change of CNG/LPG Bi-Fuel vehicle. In case of LPG Base and CNG Base condition, considerable $CO_2$ emissions are generated within range of high acceleration on FTP-75 and HWFET driving mode. However previous phenomena does not appear in CNG fuel $10^{\circ}CA$ and $15^{\circ}CA$ spark advance condition. As a result of analyzing the experimental data CNG $S/A10^{\circ}CA$, CNG $S/A15^{\circ}CA$, CNG Base, and LPG Base sequentially measured high fuel economy and low $CO_2$ emission characteristics.