• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.6-14
• /
• 2003

The purpose of this study is to investigate the effect of chemical reaction with a bonding glass on physical and magnetic properties of Fe-Hf-N/SiO$_2$ and Fe-Hf-N/Cr/SiO$_2$ thin films. When the Fe-Hf-N/SiO$_2$ films were reacted with the bonding glass, the soft magnetic properties of them were extremely degraded. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 1 kG, and its coercivity increased to 27 Oe, and its effective permeability decreased to 70. It was found that the degradation of soft magnetic properties of the Fe-Hf-N/SiO$_2$ films reacted with the bonding glass were attributed to the oxidation of the Fe-Hf-N layers to HfO$_2$ and Fe$_3$O$_4$. The soft magnetic properties of the Fe-Hf-N/Cr/SiO$_2$ films reacted with the bonding glass were degraded less than those of Fe-Hf-N/SiO$_2$ films. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 13.5 kG, and its coercivity increased to 4 Oe, and its effective permeability decreased to 700. It was found that the Cr layer suppressed the oxidation of the Fe-Hf-N layers during the chemical reaction between the Fe-Hf-N layer and bonding glass.

• Corrosion Science and Technology
• /
• v.22 no.1
• /
• pp.30-35
• /
• 2023

Hafnium nitride (HfN) thin films were fabricated by mid-frequency magnetron sputtering (mfMS) and direct current magnetron sputtering (dcMS) and their mechanical and structural properties were compared. In particular, changes in the HfN film properties were observed by changing the pulse frequency of mfMS between 5 kHz, 15 kHz, and 30 kHz. The crystalline structure, microstructure, 3D morphology, and mechanical properties of the HfN films were compared by x-ray diffraction, field-emission scanning electron microscopy, atomic force microscopy, and nanoindentation tester, respectively. HfN film deposited by mfMS showed a smoother and denser microstructure as the frequency increased, whereas the film deposited by dcMS showed a rough and sloppy microstructure. A single δ-HfN phase was observed in the HfN film made by mfMS with a pulse frequency of 30 kHz, but mixed δ-HfN and HfN_0·4 phases were observed in the HfN film made by dcMS. The mechanical properties of HfN film made by mfMS were improved compared to film made by dcMS.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.314-325
• /
• 1991

To compare the hypolipidemic effects of n6 and n3 PUFA at different fat levels, male Sprague Dawley rats were fed either low fat (LF, 10% Cal) or high fat (HF, 40% Cal) diet which was different only in fatty acid composition for 6 weeks. Dietary fats were beef tallow, corn oil, perilla oil, and fish oil concentrate as a source of saturated fatty acid, n6 linoleic acid(LA). n3 ${\alpha}-linolenic$ acid(LL) and n3 eicosapentaenoic acid(EPA)+docosahexaenoic acid(DHA), respectively. VLDL fraction was separated by ultracentrifugation and chemical composition was determined by thin layer chromatography. Plasma cholesterol level was increased by n6 LA but decreased by n3 LL and n3 EPA in LF and HF diets, and the hypocholesterolemic effect of n3 EPA was most significant in HF diet. HDL-Chol level was raised by n6 LA in LF and HF diets, but significantly reduced by n3 EPA in HF. Plasma TG level was reduced by n6 LA n3 LL and EPA in LF and HF with the reduction of lipogenic enzyme activity only by n3 PUFAs. The proportion of TG in VLDL fraction was significantly lowered by n3 EPA in LF and HF. The proportion of apo-B in VLDL fraction was not changed in LF, but was significantly decreased in HF by n3 EPA. Therefore, the hypotriglyceridemic effect of n3 PUFA could be from the reduced lipogenesis in liver and resulted in the depressed secretion of TG as VLDL in LF and HF with significant lower production of apoB in HF diet.

• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.393-398
• /
• 2023

Properties of hafnium nitride (HfN) coatings are affected by deposition conditions, most often by the sputtering technique. Appropriate use of different magnetron sputtering modes allows control of the structural development of the film, thereby enabling adjustment of its properties. This study compared properties of HfN coatings deposited by direct current magnetron sputtering (dcMS), mid-frequency direct current magnetron sputtering (mfMS), and inductively coupled plasma-assisted magnetron sputtering (ICPMS) systems. The microstructure, crystalline, and mechanical properties of these HfN coatings were investigated by field emission electron microscopy, X-ray diffraction, atomic force microscopy, and nanoindentation measurements. HfN coatings deposited using ICPMS showed smooth and highly dense microstructures, whereas those deposited by dcMS showed rough and columnar structures. Crystalline structures of HfN coatings deposited using ICPMS showed a single δ-HfN phase, whereas those deposited using dcMS and mfMS showed a mixed δ-HfN and HfN_0.4 phases. Their performance were increased in the order of dcMS < mfMS < ICPMS, with ICPMS achieving a value of 47.0 GPa, surpassing previously reported results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.54-57
• /
• 2003

[ $HfO_xN_y$ ] films using a hafnium tertiary-butoxide $(Hf[OC(CH_3)_3]_4)$ in plasma and $N_2$ ambient were prepared to improve the thermal stability of hafnium-based gate dielectrics. A 10% nitrogen incorporation into $HfO_2$ films showed a smooth surface morphology and a crystallization temperature as high as $200^{\circ}C$ compared with pure $HfO_2$ films. The $TaN/HfO_xN_y/Si$ capacitors showed a stable capacitance-voltage characteristics even at post-metal annealing temperature of $1000^{\circ}C$ in $N_2$ ambient and a constant value of 1.6 nm EOT (equivalent oxide thickness) irrespective of an increase of PDA and PMA temperature. Leakage current densities of $HfO_xN_y$ capacitors annealed at PDA temperature of 800 and $900^{\circ}C$, respectively were approximately one order of magnitude lower than that of $HfO_2$ capacitors.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.165-170
• /
• 2000

The purpose of this study is to investigate the effect of annealing conditions on physical and magnetic properties of Fe-Hf-N thin films. When the thin films were annealed in $N_2$ gas, a surface oxide layer, comprised of Fe$_2$O$_3$ and Fe$_3$O$_4$, was formed at the surface of the thin films and a Fe-Hf-O-N layer was also formed under this surface oxide layer. It was found that the thicknesses of the surface oxide layer and the Fe-Hf-O-N layer increased, as the annealing temperature increased. It was also found that if the thickness of the surface oxide layer was excluded in the property calculation, the soft magnetic properties of the annealed thin films were not much different from those of the as-deposited thin films. Therefore, it was suggested that the Fe-Hf-O-N layer formed under the surface oxide layer did not lose significantly the soft magnetic properties of the Fe-Hf-N films and the Fe-Hf-N films annealed in $N_2$gas showed the soft magnetic properties of the Fe-Hf-N and Fe-Hf-O-N multi-layers.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.780-785
• /
• 2004

The degradation mechanism of soft magnetic properties of $Fe-Hf-N/Cr/SiO_2$ thin films reacted with a bonding glass was investigated. When $Fe-Hf-N/Cr/SiO_2$ films were annealed under $600^{\circ}C$ without the bonding glass, the compositions and the soft magnetic properties of Fe-Hf-N layers were not changed. However, after reaction with the bonding glass at $550^{\circ}C$, the soft magnetic properties of the film were degraded. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 13.5 kG, and its coercivity increased to 4 Oe, and its effective permeability decreased to 700. It was founded that O diffused from the glass into the Fe-Hf-N layers during the reaction and generated $HfO_2$ phases. It was considered that the soft magnetic properties of the $Fe-Hf-N/Cr/SiO_2$ films reacted with the bonding glass were primarily degraded by the formation of the Fe-Hf-O-N layer of which the Fe content was below 60 $at\%$, and secondarily degraded by the Fe-Hf-O-N layer above 70 $at\%$.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.26-33
• /
• 1984

The rate constants for the following vibration-to-vibration energy exchange reactions have been calculated theoretically for the temperature range from 300 to 800K and for n = 2 to 5. HF(v=n) + DF(v=0) ${\to}$ HF(v=n-l) + DF(v=l) + ${\Delta}E$(a) DF(v=n) + HF(v=0) ${\to}$ DF(v=n-l) + HF(v=l) + ${\Delta}E$(b) In calculation the loosely-held, non-rigid dimer collision model and semiclassical method have been employed. The results show that the rate constants for the processes (a) are much greater than those for the processes (b). Also, it is found that the rate constants for the processes (a) increase with decreasing temperature and with increasing quantum number, while those for the processes (b) show the opposite tendencies. These findings are explained in terms of the sign and magnitude of the energy mismatch, ${\Delta}E$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.354.1-354.1
• /
• 2014

Hafnium nitride (HfN) 박막은 고온에서의 안정성과 낮은 비저항 그리고 산소확산에 대한 억제력을 가지고 있기 때문에 확산방지막으로 많은 연구가 진행 되고 있다. 현재까지 진행된 대부분의 연구는 HfN 박막의 전기적인 특성과 구조적인 특성에 대한 것이었고 다양한 연구 결과가 보고되었다. 하지만 기존의 연구들은 박막의 nano-electrotribology 특성에 대한 연구가 부족하여 박막 적층 공정시 요구되는 물성에 대한 연구가 절실하다. 따라서 본 연구에서는 HfN 박막의 증착조건 및 열처리조건에 따른 nano-electrotribology 특성 변화를 확인하고자 하였다. HfN박막은 rf magnetron sputter를 이용하여 Si 기판위에 Hf target으로 질소 유량을 변화시키며 증착하였고 가열로에서 $600^{\circ}C$와 $800^{\circ}C$로 20분간 열처리를 실시하였다. 열처리한 박막과 as-deposited 상태의 박막을 nano-indenter를 통하여 나노기계 전기적인 특성을 분석하였다. nano-indenter는 박막에 인가된 stress와 탄성계수(elastic modulus), 표면경도(surface hardness)와 같은 특성을 직접적인 tip 접촉을 통하여 in-situ로 분석할 수 있는 장비이다. 실험결과 HfN박막을 $600^{\circ}C$로 열처리 한 경우 표면경도가 16.20에서 18.59 GPa로 증가하였다. 표면경도의 증가는 열처리 시 박막내에 compressive stress가 생성되었기 때문이라고 생각된다. 그러나 $800^{\circ}C$로 열처리 한 경우 표면경도가 16.93 GPa로 감소하였는데 이는 표면균열 발생으로 인한 stress relaxation 때문인 것으로 생각된다. 증착 시 주입되는 질소의 유량과 열처리 온도는 HfN박막의 기계적 안정성에 영향을 미치는 중요한 요소임을 본 실험을 통해 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.3
• /
• pp.34-37
• /
• 2003

[ $HfO_2$ ] and $HfO_xN_y$ films were deposited by plasma-enhanced chemical vapor deposition using $Hf[OC(CH_3)_3]_4$ as the precursor in the absence of $O_2$. The crystallization temperature of the $HfO_xN_y$ films is higher than that of the $HfO_2$ film. Nitrogen incorporation in $HfO_xN_y$ was confirmed by auger electron spectroscopy analysis. After post deposition annealing (PDA) at 800$\Box$, the EOT increased from 1.34 to 1.6 nm in the $HfO_2$ thin films, whereas the increase of EOT was suppressed to less than 0.02 nm in the $HfO_xN_y$. The leakage current density decreased from 0.18 to 0.012 $A/cm^2$ with increasing PDA temperature in the $HfO_2$ films. But the leakage current density of $HfO_xN_y$ does not vary with increasing PDA temperature because an amorphous $HfO_xN_y$ films suppresses the diffusion of oxygen through the gate dielectric.