• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.149-157
• /
• 2003

원자력산업 분야의 공기정화장치에 사용되고 있는 HEPA 필터폐기물은 무게 약 20kg, 크기 $610{\times}610{\times}292mm$의 직육면체로써 무게에 비해 부피가 상대적으로 크다. 따라서 이는 방사성 폐기물의 임시저장 및 영구처분 시에 필요 이상의 많은 저장 공간을 차지하게 되고 관리에 따른 비용도 많이 소요된다. 각 국에서는 이런 HEPA 필터폐기물의 부피를 최소화하기 위해서 일반적으로 압축처리를 하고 있는데, 본고에서는 한국원자력연구소(KAERI)에서 개발한 HEPA 필터폐기물 압축처리장치의 특성을 소개하고 일본 및 미국의 압축처리장치와 비교 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.245-248
• /
• 2005

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mixture proportions, cement type and constituents, presence of admixtures, environmental factors, steel reinforcement surface. conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and cyclic wet and dry seawater method, respectively and during the test, corrosion monitoring by half cell potential method was carried out to estimate the chloride corrosion threshold value when corrosion for reinforcing steel in concrete was perceived. For this purpose, lollypop and right hexahedron test specimens were made for 31.4$\%$, 41.5$\%$ and 49.7$\%$ of w/c, respectively and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with water-cement ratio and accelerated corrosion test method, respectively and the chloride corrosion threshold value was found to range from 0.91 to 1.43 kg/$m^{3}$.

• 복식문화연구
• /
• 제18권4호
• /
• pp.640-654
• /
• 2010

The purpose of this study is to design neckties that are motivated by Christmas symbol images that have been known to public most widely in the basis of Day marketing so as to develop the competitive commodities closed to consumers' emotion in the fashion industry. As a method of this study were to use Adobe Illustrator CS2, which is one of the vector graphic programs, to present the motif design such as Santa Claus, trees, presents and letters among Christmas symbols, and are to apply to neckties by giving a change with striped pattern, all over pattern and one point pattern. The results are as follows; Firstly, Santa Claus image was expressed by color contrast with red and white, which was perceived by red, green and white that are mostly used in Christmas. Secondly, tree images are expressed abstractly with color contrast where red and green are contrasted, and color way change was given for symbol color of Christmas. Third, in the image of gift, the image of share and image of colorfulness were considered for expression by making motifs of three dimensional hexahedron shape. Fourthly, in the image of type, motif was expressed by giving a change in horizontal and vertical writing types.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.370-375
• /
• 2006

This paper suggests the method for estimating a partial discharge (PD) location using divide of the inside transformer as a grid. The PD location is found swiftly and economically compared with the typical method detecting a PD. The reason is that the location of PD is detected in the section. The estimation of PD location is trained using the Neural Network. JavaNNS(Java Neural Network Simulator) and SNNS(Stuttgart Neural Network Simulator) are used for searching the location of PD. The simulation procedure is following, The transformer is assumed that the case is a regular hexahedron. The sensor is installed in a proper location. A section of PD location is set as a target, and training set is studied with several PD locations in the inside of the transformer. As a result of training process, the learning capability of neural network is excellent. The PD location is detected by division of internal structure of transformer and application of neural network.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.542-552
• /
• 2019

The strength assessment is the most important part at the design of ice-class propeller. Based on ice rules for ice-class propeller in IACS URI3 and FEM, the strength assessment method of ice-class propeller is established in this paper. To avoid the multifarious meshing process of propeller blade, an automatic meshing method has been developed by dividing the propeller geometry into a number of 8-node hexahedron elements along radial, chordwise and thickness directions, then the loaded areas in five cases can easily be calculated and identified. The static FEM is applied to calculate the stress and deformation of propeller blade. The fair agreements between the results of the present method and ANSYS/Workbench demonstrate its robust and the feasibility, and also the method is able to produce smooth gradient field. The blade stress and deformation distributions for five load cases are studied, and then the strength of the whole blade is checked.

• 방사성폐기물학회지
• /
• 제20권3호
• /
• pp.349-356
• /
• 2022

Nuclear power plant decommissioning generates significant concrete waste, which is slightly contaminated, and expected to be classified as clearance concrete waste. Clearance concrete waste is generally crushed into rubble at the site or a satellite treatment facility for practical disposal purposes. During the process, workers are exposed to radiation from the nuclides in concrete waste. The treatment processes consist of concrete cutting/crushing, transportation, and loading/unloading. Workers' radiation exposure during the process was systematically studied. A shielding package comprising a cylindrical and hexahedron structure was considered to reduce workers' radiation exposure, and improved the treatment process's efficiency. The shielding package's effect on workers' radiation exposure during the cutting and crushing process was also studied. The calculated annual radiation exposure of concrete treatment workers was below 1 mSv, which is the annual radiation exposure limit for members of the public. It was also found that workers involved in cutting and crushing were exposed the most.

• 치과방사선
• /
• 제22권1호
• /
• pp.7-22
• /
• 1992

The stress distributions on a human mandible for 18 load cases under two different boundary conditions (mouth open and closed), using the three dimensional finite element modeling were studied. Also, the expected fracture loads for each load cases were calculated by using the Von-Mises yield criterion. The model of a mandible with all teeth was composed of 2402 hexahedron elements and 3698 nodes. CAD techniques were used to analyze the 3-dimensional results. The conclusions of this study were as follows: 1. In the mouth open state, the maximum stress occured at the condyle neck; when the lateral load was exerted, the maximum stress occured at the load side condyle. 2. In the mouth closed state, when the loads were exerted on the mandibular body and chin, the maximum stress occured at the loaded area, and when the loads were exerted on the angle and ramus, the maximum stress occured at the condyle neck. 3. The expected fracture loads in each load case were calculated using the Von-Mises yield criterion, and it was confirmed that the mandible in the mouth open state was more easily fractured than that in the mouth closed state, and the expected fracture loads are lesser in the cases that load direction is parallel at mandibular plane than 45°. 4. The magnitudes of the expected fracture loads increased in the order of angle, ramus, body and chin in case of the mouth closed state, while chin, body, angle and ramus in case of the mouth open state. 5. The Von-Mises stress concentration regions analyzed by F.E.M. corresponded well with the results of clinical studies.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.129-136
• /
• 2010

액셜 피스톤 펌프는 유압시스템의 동력원으로 널리 사용되고 있으나, 펌프내의 유체유동에 관한 연구는 유체 압축성, 고속회전, 유량변화와 복잡한 형상 때문에 1차원 해석으로 수행되어졌다. 본 연구의 목표는 3차원 수치해석 방법을 이용하여 액셜 피스톤 펌프내의 유압유체 유동과 토출압 맥동의 생성과정을 이해하는 것이다. 시뮬레이션 모델의 수렴성 향상 및 강건성 확보를 위하여 밸브 플레이트 주위의 격자계는 육면체 격자로 구성하였다. 또한, 수치해석시 필요한 오일의 밀도와 압력의 관계는 실험식을 적용하였다. 3차원 수치해석의 결과는 실험결과와 비교적 잘 일치하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.167.1-167.1
• /
• 2011

Sustainable energy generation is becoming extremely imperative due to the expected limitations in current energy resources and to reduce pollution. Especially, because of its considerable energy potential, ocean wave energy has been investigated with regard to power generation. To develop large high power wave generator system, it is important to make a small scale proto type and to test that. Thus the objective of this research is to examine the characteristics of a mechanically excited generator system having small power capacity experimentally. The water reservoir (4 m length, 1.5 m width and 1.8 m depth) having a wave maker to make arbitrary height and period of the water wave was made. The proto type consists of three main parts; a buoy, rack-pinion base one-way mechanism, and a wave generator(Fig.1). The water wave is going up and down and the hexahedron buoy is following the wave. The rack gear attached to the buoy is also going up and down to roll the pinion connected to an electric generator then it produces electricity. The experiments were performed with several conditions of water waves, and the power outputs over 30 W could be measured for some conditions. In future works, to achieve higher performance for the proto type, the effects of primary parameters (buoy shape and mass, etc.) on the system efficiency will be identified.

• 전자공학회논문지A
• /
• 제29A권1호
• /
• pp.33-40
• /
• 1992

4인치(100) 실리콘 기판상에 센서용 다이아프램을 제조할 때 생기는 식각 현상들을 관찰하고 분석하였다. 115$^{\circ}C$의 "F etch' 용액을 사용하여 300$\mu$ 이상의 깊은 식각을 행하였을 때 식각 표면에 발생하느 식각 결함은 hillock, 반응 생성물, 그리고 횐색 잔유물로 구분될 수 있었따. 특히 hillock의 경우 식각 표면에 부착된 반응 생성물의 밀도나 크기에 관계하여 |111|면들로 이루어질는 피라밋 구조나 사다리꼴 육면체등의 형태를 취함이 확인되었다. 또한 용해된 실리콘의 국부적인 과잉 포활 발생하는 흰색 잔유물의 IR 흡수 스펙트럼을 조사한 결과, Si-N-O 성분에 미량의 h와 C가 포함된 것임을 알 수 있었다. 아울러 식각면을 식각용액에 대해 아래쪽, 위쪽, 그리고 측면을 향하도록 놓았을때 식각 결함의 존재 확률과 분포 그리고 식각율의 분포를 비교한 결과 식각율의 균일성면에서는 하측방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가, 식각결함의 제거에 있어서는 측면방향의 자세가 유리하게 나타났으며 이를 반응조내의 흐름 패턴을 이용하여 해석하였다.