• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.301-316
• /
• 1995

아래를 향한 가열 수평 평판이 있는 수조에서의 자연대류 현상을 규명하기 위한 실험적, 해석적인 연구를 수행하였다. 이는 압력용기 하부에 용융물이 있을때 캐비티내에서의 열수력현상을 규명하기 위한 간단화된 모델에 관한 연구이다. 압력 용기는 하부에 가열평판이 부착된 직육면체 단열 상자로 모의하고 이 상자는 물이 차 있는 수조에 설치된다. 냉각기는 정상상태의 유동 조건을 만들기 위해 상자와 수조사이의 U자 형태의 유동 영역에 설치된다. 실제 압력용기 하부에서는 다상 유동이 발생할 확율이 크나본 연구는 복잡한 다상 유동의 열수력 현상을 규명하기 위한 첫 단계 시도로서 단상유체를 사용한 실험 및 해석 연구이다. 본 연구에서는 가열 평판 아래에서의 자연대류현상특성을 더욱 잘 이해하기 위해 LDV와 열전대를 사용하여 속도와 온도를 측정하였다. 또한 입자가 부상된 유동장을 사진 찍어 유동을 가시화 하였다. 실험결과는 다음과 같다. 유체는 가열판과 냉각기가 작동할 때 매우 효과적으로 전 유동장에 걸쳐 순환한다. 가열판 하부에서 유동이 정체된 영역이 있고 매우 얇은 열 경계층을 갖는 두드러진 온도의 성층현상이 관찰되었다. FLUTAN Code를 이용한 해석은 속도를 합리 적으로 예측할 수 있다는 결과를 보여 주었다.

• Applied Biological Chemistry
• /
• 제38권5호
• /
• pp.435-439
• /
• 1995

바이러스 살충제의 개발을 위한 기초 자료로서 Hyphantria cunea nuclear polyhedrosis virus(HcNPV)의 일부 특성과 병원성을 조사하였다. HcNPV는 Spodoptera frugiperda (Sf)세포의 핵에서 복제 되었으며, 바이러스를 감염 시켰을 경우 감염 24시간 후에 prepolyhedra 형성이 관찰 되었고, 감염 48시간 후에는 성숙된 많은 polyhedra가 전체세포에서 관찰 되었으며, 감염 72시간 후에는 polyhedra가 세포밖으로 방출 되었다. 또한 세포는 부유 배양에서 잘 성장 하였으며, 바이러스에 감염되기 전의 세포 배양액은 pH가 6.35이었으나 이주 점차 증가하여 감염 120시간 후에는 pH가 6.77이었다. Polyhedra inclusion body(PIB)를 설탕 밀도구배 원심 분리한 결과 $50{\sim}55%$ 부근에서 벤드가 형성 되었고, polyhedra는 도립 현미경과 전자 현미경하에서 관찰한 결과 대부분 4변형의 6면체(tetragonal hexahedron) 이었고, PIB의 크기는 평균 $2.5{\mu}m$이었다. 또한 감염 48시간 후에 polyhedra 속에는 다발을 형성한 비리온이 봉입 되어 있었다. 흰불나방 유충에대한 병원성 시험에서는 4령에서 보다는 2령과 3령의 유충에서 치사율이 높았고, $1.5{\times}10^{9}{\sim}l.5{\times}10^{7}PIB/ml$로 섭식시킨 구룹에서는 2령과 3령 유충에서 90% 이상의 치사율을 나타 내었다.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.211-221
• /
• 1998

Thermal behavior on the cylinder block of a 4-cylinder, 4-stroke 2.0L SOHC gasoline engine was numerically and experimentally analyzed. The numerical calculation was performed using the finite element method. The cylinder block was modelled as a three dimensional finite element by considering its geometry. The physical domain was devided into hexahedron elements. 16 thermocouples were installed at points of 2mm inside from cylinder wall near top ring of piston in cylinder block, which points have suffered major thermal loads and suggested as proper measurement points for engine design by industrial engineers. Under full load and 9$0^{\circ}C$ coolant temperature condition, temperature behavior of cylinder block according to engine speed were analyzed. The results showed that temperature rose gradually to conform to a function of 2nd~4th order of engine speed at intake side, exhaust and siamese side, respectively. As engine load was changed from 100 to 50% by 25% step, temperature curve also conformed to 2nd~7th order function of engine speed. Temperature differences by load condition were similar among 100, 75% and 50%. Under full load and coolant temperature of 11$0^{\circ}C$, temperature behavior were also analyzed and the result also showed conformance to 2n d~7th order function of engine speed. Temperature curve was transferred in parallel upwards corresponding coolant temperature rise.

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.332-337
• /
• 2007

In the early twenty-first century, minimally invasive surgery is the mainstay of various kinds of surgical fields. Surgeons gave percutaneously surgical treatment of the screw directly using a fluoroscopic view in the past. The latest date, they began to operate the fractured carpal bone surgery using Computerized Tomography (CT). Carpal bones composed of wrist joint consist of eight small bones which have hexahedron and sponge shape. Because of these shape, it is difficult to grasp the shape of carpal bones using only CT image data. Although several image segmentation studies have been conducted with carpal bone CT image data, more studies about carpal bone using CT data are still required. Especially, to apply the software implemented from the studies to clinical fIeld, the outcomes should be user friendly and very accurate. To satisfy those conditions, we propose modified multi-seed region growing segmentation method which uses simple threshold and the canny edge detector for finding edge information more accurately. This method is able to use very easily and gives us high accuracy and high speed for extracting the edge information of carpal bones. Especially, using multi-seed points, multi-bone objects of the carpal bone are extracted simultaneously.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.488-495
• /
• 2011

This study was performed to fabricate the porous titanium foam by space holder method using NaCl powder, and to evaluate the effect of NaCl volume fractions (33.3~66.6 vol.%) on the porosities, compressive strength, Young's modulus and permeability. For controlling pore size, CP titanium and NaCl particles were sieved to different size range of 70~150 ${\mu}m$ and 300~425 ${\mu}m$ respectively. NaCl of green Ti compact was removed in water followed by sintered at $1200^{\circ}C$ for 2 hours. Total porosities of titanium foam were in the range of 38-70%. Pore shape was a regular hexahedron similar that of NaCl shape. Porous Ti body showed that Young's modulus and compressive strength were in the range of 0.6-6 GPa and 8-127 MPa respectively. It showed that pore size and mechanical properties of Ti foams was controllable by NaCl size and volume fractions.

• 정보처리학회논문지B
• /
• 제17B권4호
• /
• pp.287-294
• /
• 2010

TOF(Time of Flight) 기술은 물체의 3차원 깊이 정보 추출을 가능케 하는 기술 중의 하나이다. 하지만, TOF의 카메라의 출력인 깊이 영상을 이용한 물체의 3차원 위치 추출은 몸이나 손 등 크기가 큰 물체의 경우에는 비교적 신뢰성 있는 결과를 얻을 수 있는데 비하여 크기가 작은 손 끝의 경우에는 신뢰할 수 있는 값을 얻기 힘들다. 본 논문에서는 TOF 카메라에서 육면체 손 모델을 이용하여 수정된 손의 영상에서의 위치 정보와 팔 모델을 이용하여 손 끝의 3차원 좌표를 추정한다. 제안된 방법으로 실험을 한 결과 TOF 카메라의 깊이 영상만을 사용하여 인식한 손 끝의 3차원 위치정보와 비교하여 훨씬 더 향상된 결과를 얻을 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.201-204
• /
• 2006

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mix proportions, cement type and constituents, presence of admixtures, environmental factors, reinforcement surface conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and cyclic wet and dry seawater method, respectively and during the test, corrosion monitoring by half-cell potential method was carried out to detect the time to initiation of corrosion for individual test specimen. For this purpose, lollypop and right hexahedron test specimens were made for 31%, 42%, and 50% of W/C, respectively, and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with the water-cement ratio and accelerated corrosion test method, respectively and the critical chloride threshold values were found to range from 0.91 to $1.47kg/m^3$.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.307-312
• /
• 2011

Purpose: The purpose of this study is a porous cube mechanical analysis for the dental implant. Methods: The porous cube with a side length of 10mm was designed for dental implant. To choose proper design, porous hexagon with a side 10mm which was drilled as a regular hexagon with diameter 0.8mm, 1.0mm, 1.2mm and a side 0.4mm, 0.5mm, 0.6mm each using Computer AUTO CAD(Autodesk, 2008). Each cube was carried out in the mechanical analysis. Results: The result of mechanical analysis was observed that the H0.8 was minimum stress 0.045068MPa, maximum stress 9.4565MPa and minimum strain $0.00389{\times}10^{-4}Mpa$, maximum strain $0.816{\times}10^{-4}Mpa$, the H1.0 minimum stress 0.001147MPa, maximum stress 9.099MPa and minimum strain $0.000099{\times}10^{-4}Mpa$, the maximum strain $0.784{\times}10^{-4}Mpa$, the H1.2 minimum stress 0.099393MPa, maximum stress 13.137MPa and minimum strain $0.0112{\times}10^{-4}Mpa$, maximum strain $1.13{\times}10^{-4}Mpa$. Conclusion: The mechanical analysis of porous hexahedron was that H1.0 is the best result. It will be applicable to the porous implants.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.891-898
• /
• 2001

This paper develops a master manipulator which can reflect a force from a slave manipulator effectively. It many have a big workspace, can represent a human operators manipulation perfectly, and is composed of a position control part, an orientation control part and an end effector control part. This paper also develops a graphic simulator using the Visual C++ and OpenGL in the Window operating system. It can be used to make a virtual slave manipulator and set a virtual working environment, and provide a visual information from a desired view point. A virtual teleoperation system is developed by connecting the developed master manipulator to the graphic simulator using an interfacing hardware bilaterally. It is used for performing a virtual object exploration experiment. In the experiment, two virtual objects are used. They are virtual wall and virtual hexahedron which have 0.7N/mm and 2.2 N/mm stiffness respectively. The experiments are performed under six different working conditions. The experiment results will show the effectiveness of the reflected force from the slave manipulator for improving the efficiency and stability of the teleoperation task.

• 대한의용생체공학회:의공학회지
• /
• 제8권1호
• /
• pp.57-62
• /
• 1987

본 연구에서는 8-node cubic element로서 3차원 흉부모델을 구성하였고 또한 3차원 정상상태 유한요소법 코드를 FORTRAN을 이용하여 개발하였다. 프로그램의 출력은 각 node의 전위. 각 요소의 전ㄹ. 그리고 Z축방향으로의 각 층에서 총 전류이다. 이 흉부모델을 이용한 임피던스혈량측정법에서의 기초임피던스 ($Z_0$)를 계산하였다. 일반화된 라플라스 방정식을 정전위와 무전속 경계조건을 적용하여 풀었다. 또한, 전극간의 전위차와 $Z_0$의 계산값이 실측치와 근접하였으므로 이 모델이 인체의 흉뷰화 유사함을 확인하였다.