• Applied Science and Convergence Technology
• /
• 제23권1호
• /
• pp.48-53
• /
• 2014

We have formulated hexagonal-shaped gold nanoplates in a single-step for photothermal therapy that gold ions to gold particles using pyrenyl dextran as reducible stabilizer and template. They exhibit anisotropic structure with broad surface plasmon resonance (SPR) band into near-infrared (NIR) spectrum enabling photothermal therapy. These gold nanoplates are also confirmed biocompatibility and high uptake efficiency due to binding with dextran molecules on the surface of gold nanoplates and cells. From in vitro phtothermal ablation study under NIR laser, gold nanoplates have the potential to use as photothermal agents.

• Current Optics and Photonics
• /
• 제3권4호
• /
• pp.304-310
• /
• 2019

In this paper, a microstructured, hexagonal-shaped dual-core photonic crystal fiber (PCF) is proposed. The proposed structure has specific optical properties to obtain high birefringence and short coupling length, for different values of structural parameters varied over a wide range of wavelength. The properties are analyzed using a solid core of silica material. The proposed structure is implemented as a polarization splitter with splitting length of 1.9 mm and a splitting ratio of -34.988 dB, at a wavelength of 1550 nm. The obtained bandwidth in one band gap of about 81 nm. The numerical analysis ensures that the performance of the proposed polarization splitter is better than that of existing ones.

• International Journal of Fluid Machinery and Systems
• /
• 제6권3호
• /
• pp.121-136
• /
• 2013

This paper reports the 1-D fluid transient simulation results of the discharge flow conditions in a 6-cylinder reciprocating slurry pump. Two discharge manifold configurations are studied comparatively; a case with a hexagon shaped discharge manifold where each cylinder discharges at a single vertex, and a case where all the cylinders discharges are lumped together into a tank shaped manifold. In addition, the study examines the effect of two pulsation mitigation measures in the case of hexagonal manifold; a single inline orifice in one of the hexagon sides and a volumetric dampener at the manifold outlet. The study establishes the pressure and flow fluctuation characteristics of each configuration and decouples the pulsation characteristics of the pump and the discharge manifold.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.91-97
• /
• 2020

A split-die design for the cold forging of symmetric parts such as those having a hexagonal cross-section is presented in this paper. Parts with a hexagonal cross-section, such as bolt heads and nuts, should be forged with a die that has a hexagonal-shaped hole. A split type die is required to mitigate the buildup of stress concentrations located at the corners of the hexagonal hole. Generally, the insert of a hexagonal die is made by cutting each corner of a cylinder using a hexagonal hole and then combined with the die and shrink-fitted. However, split dies face problems when extruding material at the corners of the hexagonal split die. To address this problem, two types of split dies were evaluated: rounded hexagonal dies and angular hexagonal dies. The effects of the pre-stress ring on the dies were compared and analyzed and results show that using the angular split hexagonal die can extend the lifetime of forging dies.

• 건축역사연구
• /
• 제16권4호
• /
• pp.37-56
• /
• 2007

The '凸'-shaped, the '呂'-shaped and the hexagonal-shaped pit houses were excavated at the Youngdong area, some location along the upper the Imjin River and Han River between the Iron age and the kingdom of Hanseong Baekje. The aim of this study is to analyze various structural system and developement of the pit house with rectangular plan. It is considered a matter in all its aspects which are plan, scale, aspect, pillar holes, carbonized wood and several traces. These pit houses removes the pillar on the inside or it reduces to secure a wider space, it pursued the chamfered corner, the change of the front, the entrance fixed. Also these adopted diverse structural systems(the chuandou structure, the structural system of columns and beams and a bearing wall). But in the course of time, the Korean wooden architecture is developed gradually the structural system of columns and beams. It is presumed the result that overcome the limit with the close space and pursue the flowing space and compose a group of organizable buildings.

• 한국전자파학회논문지
• /
• 제18권2호
• /
• pp.199-205
• /
• 2007

본 논문에서는 초고속 디지털 PCB 회로에서 발생하는 GBN(Ground Bounce Noise)을 억제하기 위한 새로운 EBG(Electromagnetic Bandgap) 구조의 전원면을 제안하였다. 제안된 구조는 육각형 모양의 단위 셀과 각 셀을 연결하는 선로로 구성되어 있다. 육각형 모양의 단위 셀은 등방성을 띄어 인접 셀의 각 포트 사이의 전달 특성을 동일하게 한다. 제안된 구조는 실제 제작, 측정되었고 330 MHz부터 5.6 GHz까지 넓은 주파수 대역에서 -30 dB 이하로 GBN을 억제하는 특성을 나타낸다. Electromagnetic Interference(EMI) 방사 측정 시에도 일반 전원면/접지면에 비해 낮은 EMI 특성을 나타낸다. 본 논문에서 제안한 육각형 EBG 구조의 전원면은 실제 EBG 전원면의 적용에 효율적으로 작용하여 초고속 디지털 회로의 EMI 문제를 해결하는 데 기여할 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.110-113
• /
• 2012

ZnO crystals with a baseball bat shape were synthesized without any catalysts through a simple thermal oxidation of ZnS powder in alumina crucible under air atmosphere. SEM images demonstrated that the bat structure was composed of two pieces of ZnO crystals, i.e hexagonal-shaped rod and inverted cone-shaped rod. X-ray diffraction (XRD) pattern revealed that the ZnO crystals had wurtzite hexagonal structure. Energy dispersive X-ray (EDX) spectrum showed that the ZnO was of high purity. A strong green emission peak at 510 nm was observed in cathodoluminescece spectrum.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.155-158
• /
• 2007

An area distribution of Corneal Endothelial Cell(CEC) include important clinical information. In this paper, we present a two-step processing method of contour complement for the CEC. In the first step; we apply not only conventional Laplasian Gaussian filters(LGF) but also three-arrow-shaped LGFs which is newly developed to extract vertices of hexagonal shapes. In the second step; we complement the lacking part of CEC by using an energy minimum algorithm. Using the results, we measure areas of CEC.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1996년도 춘계연구발표회 논문개요집
• /
• pp.72-73
• /
• 1996

• Steel and Composite Structures
• /
• 제23권6호
• /
• pp.633-646
• /
• 2017

The compressive behavior of special-shaped concrete filled tube (CFT) mega column coupled with multiple cavities is studied by testing six columns subjected to cyclically uniaxial compressive load. The six columns include three pentagonal specimens and three hexagonal specimens. The influence of cavity construction, arrangement of reinforcement, concrete strength on failure feature, bearing capacity, stiffness, and residual deformation is examined. Experimental results show that cavity construction and reinforcements make it possible to form a combined confinement effect to in-filled concrete, and the two groups of special-shaped CFT columns show good elastic-plastic compressive behavior. As there is no axial bearing capacity calculation method currently available in any Code of practice for special-shaped CFT columns, values predicted by normal CFT column formulas in GB50936, CECS254, ACI-318, EC4, AISCI-LRFD, CECS159, and AIJ are compared with tested values. The calculated values are lower than the tested values for most columns, thus the predicted bearing capacity is safe. A reasonable calculation method by dividing concrete into active and inactive confined regions is proposed. And high accuracy shows in estimating special-shaped CFT columns either coupled with multiple cavities or not. In addition, a finite element method (FEM) analysis is conducted and the simulated results match the test well.