• Applied Science and Convergence Technology
• /
• v.23 no.1
• /
• pp.48-53
• /
• 2014

We have formulated hexagonal-shaped gold nanoplates in a single-step for photothermal therapy that gold ions to gold particles using pyrenyl dextran as reducible stabilizer and template. They exhibit anisotropic structure with broad surface plasmon resonance (SPR) band into near-infrared (NIR) spectrum enabling photothermal therapy. These gold nanoplates are also confirmed biocompatibility and high uptake efficiency due to binding with dextran molecules on the surface of gold nanoplates and cells. From in vitro phtothermal ablation study under NIR laser, gold nanoplates have the potential to use as photothermal agents.

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.304-310
• /
• 2019

In this paper, a microstructured, hexagonal-shaped dual-core photonic crystal fiber (PCF) is proposed. The proposed structure has specific optical properties to obtain high birefringence and short coupling length, for different values of structural parameters varied over a wide range of wavelength. The properties are analyzed using a solid core of silica material. The proposed structure is implemented as a polarization splitter with splitting length of 1.9 mm and a splitting ratio of -34.988 dB, at a wavelength of 1550 nm. The obtained bandwidth in one band gap of about 81 nm. The numerical analysis ensures that the performance of the proposed polarization splitter is better than that of existing ones.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.3
• /
• pp.121-136
• /
• 2013

This paper reports the 1-D fluid transient simulation results of the discharge flow conditions in a 6-cylinder reciprocating slurry pump. Two discharge manifold configurations are studied comparatively; a case with a hexagon shaped discharge manifold where each cylinder discharges at a single vertex, and a case where all the cylinders discharges are lumped together into a tank shaped manifold. In addition, the study examines the effect of two pulsation mitigation measures in the case of hexagonal manifold; a single inline orifice in one of the hexagon sides and a volumetric dampener at the manifold outlet. The study establishes the pressure and flow fluctuation characteristics of each configuration and decouples the pulsation characteristics of the pump and the discharge manifold.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.91-97
• /
• 2020

A split-die design for the cold forging of symmetric parts such as those having a hexagonal cross-section is presented in this paper. Parts with a hexagonal cross-section, such as bolt heads and nuts, should be forged with a die that has a hexagonal-shaped hole. A split type die is required to mitigate the buildup of stress concentrations located at the corners of the hexagonal hole. Generally, the insert of a hexagonal die is made by cutting each corner of a cylinder using a hexagonal hole and then combined with the die and shrink-fitted. However, split dies face problems when extruding material at the corners of the hexagonal split die. To address this problem, two types of split dies were evaluated: rounded hexagonal dies and angular hexagonal dies. The effects of the pre-stress ring on the dies were compared and analyzed and results show that using the angular split hexagonal die can extend the lifetime of forging dies.

• Journal of architectural history
• /
• v.16 no.4
• /
• pp.37-56
• /
• 2007

The '凸'-shaped, the '呂'-shaped and the hexagonal-shaped pit houses were excavated at the Youngdong area, some location along the upper the Imjin River and Han River between the Iron age and the kingdom of Hanseong Baekje. The aim of this study is to analyze various structural system and developement of the pit house with rectangular plan. It is considered a matter in all its aspects which are plan, scale, aspect, pillar holes, carbonized wood and several traces. These pit houses removes the pillar on the inside or it reduces to secure a wider space, it pursued the chamfered corner, the change of the front, the entrance fixed. Also these adopted diverse structural systems(the chuandou structure, the structural system of columns and beams and a bearing wall). But in the course of time, the Korean wooden architecture is developed gradually the structural system of columns and beams. It is presumed the result that overcome the limit with the close space and pursue the flowing space and compose a group of organizable buildings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.199-205
• /
• 2007

In this paper, a novel hexagonal-shaped electromagnetic bandgap(EBG) power plane for the suppression of the ground bounce noise(GBN) in high-speed circuits is proposed. The proposed structure consists of hexagonal-shaped unit cells and detoured bridges connecting the unit cells. The hexagonal-shaped unit cells could omni-directionally suppress the GBN in digital circuits. The fabricated power plane's omni-directional -30 dB suppression bandwidth is from 330 MHz to 5.6 GHz. Then the proposed structure suppresses electromagnetic interference(EMI) caused by the GBN within the stopband. As a result, the proposed structure is expected to be conducive solving EMI problem in high-speed circuits.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.110-113
• /
• 2012

ZnO crystals with a baseball bat shape were synthesized without any catalysts through a simple thermal oxidation of ZnS powder in alumina crucible under air atmosphere. SEM images demonstrated that the bat structure was composed of two pieces of ZnO crystals, i.e hexagonal-shaped rod and inverted cone-shaped rod. X-ray diffraction (XRD) pattern revealed that the ZnO crystals had wurtzite hexagonal structure. Energy dispersive X-ray (EDX) spectrum showed that the ZnO was of high purity. A strong green emission peak at 510 nm was observed in cathodoluminescece spectrum.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.155-158
• /
• 2007

An area distribution of Corneal Endothelial Cell(CEC) include important clinical information. In this paper, we present a two-step processing method of contour complement for the CEC. In the first step; we apply not only conventional Laplasian Gaussian filters(LGF) but also three-arrow-shaped LGFs which is newly developed to extract vertices of hexagonal shapes. In the second step; we complement the lacking part of CEC by using an energy minimum algorithm. Using the results, we measure areas of CEC.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1996.05a
• /
• pp.72-73
• /
• 1996

• Steel and Composite Structures
• /
• v.23 no.6
• /
• pp.633-646
• /
• 2017

The compressive behavior of special-shaped concrete filled tube (CFT) mega column coupled with multiple cavities is studied by testing six columns subjected to cyclically uniaxial compressive load. The six columns include three pentagonal specimens and three hexagonal specimens. The influence of cavity construction, arrangement of reinforcement, concrete strength on failure feature, bearing capacity, stiffness, and residual deformation is examined. Experimental results show that cavity construction and reinforcements make it possible to form a combined confinement effect to in-filled concrete, and the two groups of special-shaped CFT columns show good elastic-plastic compressive behavior. As there is no axial bearing capacity calculation method currently available in any Code of practice for special-shaped CFT columns, values predicted by normal CFT column formulas in GB50936, CECS254, ACI-318, EC4, AISCI-LRFD, CECS159, and AIJ are compared with tested values. The calculated values are lower than the tested values for most columns, thus the predicted bearing capacity is safe. A reasonable calculation method by dividing concrete into active and inactive confined regions is proposed. And high accuracy shows in estimating special-shaped CFT columns either coupled with multiple cavities or not. In addition, a finite element method (FEM) analysis is conducted and the simulated results match the test well.