• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.22-27
• /
• 2017

During the water treatment process for household water supply, a reservoir is the last place the water is stored before being supplied to users, and the duration of the water's stay is an important factor that affects its safety. This may cause the concentration of the residual chlorine disinfectant to increase and thus lower the water's quality. The concentration and discharge efficiency of residual chlorine must be verified and managed, because these are key factors that affect the reservoir's performance. Because the actual verification test for analyzing the efficiency of a reservoir and the disinfectant's dilution capacity is difficult, simulations are generally conducted using the computational fluid analysis method. However, the simulation results require validation with experiments. The error and drainage efficiency were analyzed in this study by comparing and analyzing the actual tracer test and simulation so that the actual test for a hexagonal drainage can be replaced by the computational fluid analysis method. Based on the results of the efficiency analysis, the hexagonal reservoir was found to be appropriate, and the simulation's reliability was verified with a tracer test.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.34-43
• /
• 2017

Large amounts of household water are required as common households change from the single-residence types of the past to group-residence types. Therefore, the management of reservoirs is urgently required to ensure the supply of clean household water to users. Important considerations for household water include the duration for which the water is stored in the reservoir, the disinfectant's dilution capacity, and the size of the reservoir to allow for the amount of water required for emergencies and firefighting. The drainage efficiency was analyzed in this study using computational fluid analysis for existing rectangular reservoirs and the newly proposed hexagonal reservoir. Thus, it was determined that the centrifugal force generated at the inlet was maintained until the outlet due to the approximately circular shape of the hexagonal reservoir. The findings of this study verified that the centrifugal force improved the flow rate by approximately 35% compared to existing rectangular reservoirs and that drainage was performed efficiently without stagnation zone.

• 미생물학회지
• /
• 제17권4호
• /
• pp.165-178
• /
• 1979

Phages of Lactobaciilus casei (PLC) isolated from plant drainage were classified and characterized. The results are as follows : 1. On the basis of host range pattern, phages could be divided into 2 groups (PLC-B and PLC-C). PLC-B group phages could be further divided into 5 sub-groups $(B_1, \;B_2, \;B_3, \;B_4, \;and\;B_5)$. Although PLC-C group phages had the same host range, they could be also divided into 2 sub-groups $(C_1\;and\;C_2)$ by morphlogical type. 2. It was $B_3$ group phages that represented a major proportion (44.4%) of phages tested. However, $B_1$ group phages were shown to have the widest host range. 3. Electron micrographs revealed that the phages fell into three different morphological types. $(B_1, \;B_2, \;and\;B_3)$ group phages hd a hexagonal head (52nm in diameter) and a sheathless noncontractile (245 nm in length). $B_4\;and\;C_2$ group phages had a hexagonal head (56 nm) and a short flexible tail (169nm) having no sheath. $B_5\;and\;C_1$ group phages were shown to have a hexagonal head (81 nm) and a contractile tail (140 nm) having a sheath, a base plate and tail fibers. 4. The inactivation of the phages by antisera indicated that serological relationships correlated completely with morphological types. 5. $B_1, \;C_1\;and\;C_2$ group phages produced a large (1, 2 mm in diameter) plaque with a clear ring. The morphology of plaques of $B_3\;and\;B_5$ group phages was the same as those produced by the above, but the average plaque sizes for $B_3\;and\;B_5$ were 0.8 mm abd 0.5 mm, respectively. $B_2\;and\;B_4$ group phages produced a small (0.5 mm) turbid plaque with an irregular edge. 6. The latent period and the average burst size of $B_1\;and\;B_3$ group phages were 90 min and 100, respectively. These phages reuqired calcium ions for their miltiplication. 7. $B_3$ group phages could not be absrobed to R-variant $KC_1$. 8. The order of resistance of phages to heat was $B_2\;>\;B_1, B_4\;and\;B_5\;>\;B_3\;and\;C_2, \;B_5$ group phages were more stable than $B_3$ in various pH values. $C_2$ group phages were more sensitive to UV irradiation than $B_1\;and\;B_3$ group phages. 9. Strains YIT9018 and IAM 1043 were induced by mitomycin C treatment. Phage particles detected in the lysates had a hexagonal head (38 and 49 nm, respectively), but no tail. Any sensitive indicator strain could not be isolated in spite of repaeated trials.

• 헤리티지:역사와 과학
• /
• 제55권3호
• /
• pp.102-118
• /
• 2022

신라왕경 경주는 신라 천년의 문화와 기술이 집약된 도시이다. 하지만 신라왕경의 조경 유적에 대해서는 동궁과 월지 외에는 관련 자료 부족 등의 이유로 연구가 미진하였다. 이에 본 연구에서는 동궁과 월지에 이어 그 전모가 발굴조사로 확인된 구황동 원지의 조영 특성과 성격에 대해 고찰하였다. 경주 구황동 원지는 발굴조사 후 지금까지 궁원지(宮園池)이냐 분황사의 사원지(寺院池)이냐를 두고 의견이 분분하다. 원지의 특징인 두 시기로 구분되는 유구의 양상으로 볼 때 1차시기인 6~7세기에는 용 신앙과 관련한 제의시설, 2차시기인 8~9세기에는 조경적 기능이 강화된 원지로 기능하였을 것으로 해석하였다. 또한, 문헌 기록에 나오는 청연궁(青淵宮)과 조추정(造秋亭)이 있던 자리일 가능성이 높다. 1차시기의 특징적인 시설로 'ㄹ'자형 수로가 확인되는데 수로의 폭과 깊이로 보아 단순 배수시설로 보기에는 부족하며, 용 제의와 관련하여 관념상 용이 들어오는 통로로 여겨진다. 나아가 의례와 관련한 유상곡수(流觴曲水) 시설일 가능성도 제기된다. 이러한 용 제의 관련 시설이 2차시기가 되면서 개편되는데 굴곡진 호안, 정원석, 누정 건물의 등장과 'ㄹ'자형 수로, 육각형 건물의 폐기 등과 관련하여 경관 기능 중심의 원지로 그 성격이 변화하였음을 알 수 있다. 성격과 관련하여서는 1차시기의 제의기능과 2차시기의 귀면와를 포함한 의장적 요소로 볼 때 왕실 관련 시설로 볼 수 있다. 원지 서편에 인접한 축대 상부가 삭평된 것으로 볼 때 주 건물지는 축대 상부에 있었을 가능성이 높다. 왕이 거처하는 이궁이 아닌 제의기능과 유휴기능을 가졌기 때문에 대규모 건물지는 없었을 것이다.