• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.99-108
• /
• 2008

For video compression, we have to consider two performance factors that are the search speed and coded video's quality. In this paper, we propose an enhanced fast block matching algorithm using the spatial correlation of the video sequence and the center-biased characteristic of motion vectors(MV). The proposed algorithm first finds a predicted motion vector from the adjacent macro blocks of the current frame and determines an exact motion vector using the cross pattern and a flat hexagon search pattern. From the performance evaluations, we can see that our algorithm outperforms both the hexagon-based search(HEXBS) and the cross-hexagon search(CHS) algorithms in terms of the search speed and coded video's quality. Using our algorithm, we can improve the search speed by up to 31%, and also increase the PSNR(Peak Signal Noise Ratio) by at most 0.5 dB, thereby improving the video quality.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.953-964
• /
• 2003

In the block matching algorithm, search patterns of different shapes or sizes and the distribution of motion vectors have a large impact on both the searching speed and the image quality. In this paper, we propose a new fast block matching algorithm using the cross pattern and the flat-hexagon search pattern. Our algorithm first finds the motion vectors that are close to the center of search window using the cross pattern, and then lastly finds the other motion vectors that are not close to the center of search window using the flat-hexagon search pattern. Through experiments, compared with the hexagon-based search algorithm(HEXBS), the proposed cross pattern and flat-hexagonal pattern search algorithm(CFHPS ) improves about 0.2-6.2% in terms of average number of search point per motion vector estimation and improves about 0.02-0.31dB in terms of PSNR(Peak Signal to Noise Ratio).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.149-153
• /
• 2003

In this paper, a hexagon-type piezoelectric transformer was investigated to increase the output power. The length of its side was 14mm and 17.5[mm], respectively. The piezoelectric ceramics was composed to PZT-PMN-PSN. This composition showed the characteristics which had an about 1200 of the mechanical Q-factor, 0.55 of the electromechanical coupling coefficient, 320 x 10$\^$-12/ C/N of the piezoelectric constant d$\sub$33/, 0.3% of the dissipation factor, etc. The voltage step-up ratio increased with increasing the load resistance, Rt., so it reached 80 with R$\sub$L/ of l[M$\Omega$] and was proportion to the length of side of the hexagon-type piezoelectric transformer.

• Journal of Information Processing Systems
• /
• v.6 no.1
• /
• pp.53-66
• /
• 2010

The energy efficiency is a key design issue to improve the lifetime of the underwater sensor networks (UWSN) consisting of sensor nodes equipped with a small battery of limited energy resource. In this paper, we apply a hexagon tessellation with an ideal cell size to deploy the underwater sensor nodes for two-dimensional UWSN. Upon this setting, we propose an enhanced hybrid transmission method that forwards data packets in a mixed transmission way based on location dependent direct transmitting or uniform multi-hop forwarding. In order to select direct transmitting or uniform multi-hop forwarding, the proposed method applies the threshold annulus that is defined as the distance between the cluster head node and the base station (BS). Our simulation results show that the proposed method enhances the energy efficiency compared with the existing multi-hop forwarding methods and hybrid transmission methods

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.129-132
• /
• 2022

In this paper, a technique for optimizing the sub-array system structure that can minimize the side lobe level of the phased-array antenna is proposed. Optimization of the proposed array antenna structure is to adjust the spacing between sub-arrays and sub-arrays by using a hexagonal array structure of one sub-array and a hexagonal sub-array for six hexagonal arrays, and thus the entire phased array antenna system of the radiation pattern was optimized. Compared to the 2-dimensional planar antenna system, the proposed technique maintains a gain of 24.3 dBi and a half-power beam-width of 8.46 degrees without change, and only reduces -3.4 dB and -6.5 dB in the x-axis and y-axis directions, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.3
• /
• pp.399-407
• /
• 2008

The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on temperature variables despite the break of the pin tail. In this study, the tension of torque shear bolts were compared with two types of high-strength hexagon bolts by temperature parameters from ${-10^{\circ}C}$ to ${50^{\circ}C}$. Torque shear bolts showed that the average clamping force increased to 20kN as the temperature increased. In case of galvanized high-strength hexagon bolts, the average clamping forces at $0^{\circ}C$, $20^{\circ}C$, $50^{\circ}C$ were recorded over standard bolt tension, 178kN, and the worst standard deviation was 50kN. In case of high-strength hexagon bolts, ave rage clamping forces increased as the temperature went up, and the worst standard deviation was 33kN lower than that of galvanized high-strength hexagon bolts. As for the turn-of-the-nut method, at nut rotation of ${90^{\circ}}$, two types of high-strength hexagon bolts did not met the intended design bolt in tension, 162kN.it is neccessary to re-evaluate the range of turn of nut, ${120^{\circ}{\pm}30^{\circ}}$.

• Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.37-41
• /
• 2018

• Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.9-12
• /
• 2021

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.3
• /
• pp.121-136
• /
• 2013

This paper reports the 1-D fluid transient simulation results of the discharge flow conditions in a 6-cylinder reciprocating slurry pump. Two discharge manifold configurations are studied comparatively; a case with a hexagon shaped discharge manifold where each cylinder discharges at a single vertex, and a case where all the cylinders discharges are lumped together into a tank shaped manifold. In addition, the study examines the effect of two pulsation mitigation measures in the case of hexagonal manifold; a single inline orifice in one of the hexagon sides and a volumetric dampener at the manifold outlet. The study establishes the pressure and flow fluctuation characteristics of each configuration and decouples the pulsation characteristics of the pump and the discharge manifold.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.115-126
• /
• 2016

In this study, computational fluid dynamics (CFD) analysis was conducted to investigate the flow pattern and to find the occurrence of dead zones in an existing capacitive deionization (CDI) cell. Newly designed cells-specifically designed to avoid dead zones-were analyzed by CFD in accordance with the flow rates of 15, 25 and 35 ml/min. Next, the separation performances between the existing and newly designed cell were compared by conducting CDI experiments in terms of salt removal efficiency at the same flow rates. Then, the computational and experimental results were compared to each other. The salt removal efficiencies of the hexagon flow channel 1 (HFC1) and hexagon flow channel 2 (HFC2) were increased 88-124% at 15 ml/min and 49-50% at 25 ml/min, respectively. There was no difference between the existing cell and the foursquare flow cell (FFC) at 35 ml/min.