• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.39-50
• /
• 1993

최근 회전계의 고속화, 소형화 및 정숙운전에 대한 요구가 엄격해짐에 따라 볼베어링을 저어널베어링으로 대체하는 흐름이 증가하고 있으나, 저어널베어링의 기본 구조상 운전시 여러 종류의 진동모드가 발생되며 이에 따라 엄밀한 설계가 요구된다. 이러한 요구에 따라 본 연구에서는 불안정성을 억제할 수 있는 것으로 알려진 빗살무늬 저어널베어링을 대상으로 하여 보다 정확한 설계를 위한 수치해석 프로그램을 개발하였다. 빗살무늬저어널베어링의 해석법으로는 간극의 비선형성을 단순화 시키기 위하여 무한홈을 가정한 협곡이론을 시초로 하여 최근에는 컴류터 계산속도의 발달로 실제 형상에 대해 해석한 직접계산법 등이 알려져 있다. 직접계산법은 협곡이론에 의한 계산법에 비해 많은 시간이 걸리는 단점이 있으나, 베어링이 소형화되어 실제 많은 홈을 가공하기 힘들거나 홈이 원호형으로서 직각홈으로 가정하기가 곤란한 요소에서는 협곡이론을 적용하는데 무리가 있을 것으로 사료된다. 따라서 본 연구에서는 직접계산법을 채택하여 소형 베어링 모델에 대한 부하특성을 수치해석하고, 이를 협곡이론과의 비교를 통하여 그 차이점을 검토하였다. 이를 위해 압축성을 고려한 레이놀즈 방정식에 대한 베어링 주위의 압력분포를 계산하는 프로그램을 제작하였으며, 주어진 설계조건하에서 빗살무늬 형상을 결정하는 피라미터들의 최적값을 산출하고, 아울러 플레인저어널베어링과의 비교를 통하여 설계조건에 따른 빗살무늬저어널베어링의 기존 불베어리의 대체 가능성을 평가하였다.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2008

Recently, brick pavement were widely introduced on the pavement in rural area. A variety of vision effects can be created from patterns of brick pavement. However, in most of brick pavement works, human psychological characteristics were not concerned. The purpose of this research was to discover psychological effect on brick pavement pattern. The results of the research can be summarized as follows: 1)Psychological impression on brick pavement pattern is similar among man and woman groups. 2)Stack bond and running bond pattern have a simple, relaxed, organized, and comfortable psychological characteristics. Basket weave & stack bond pattern has a simple and organized psychological characteristic. Herringbone bond pattern has a complex, dislike and uncomfortable psychological characteristic. Pinwheel bond pattern has a highly complex psychological characteristic. Basket weave and Basket weave variation bond pattern have a common psychological characteristic. 3)Employment of brick pavement pattern on this research is not highly preferred, hence it is necessary to develop a brick pavement patterns that have human psychological characteristics be concerned.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.148-155
• /
• 2005

As functional requirement of massive digital information storage devices are on a trend for the higher data transfer rate and lower cost, many different technical efforts are being tested and implemented in the industry. FDB(fluid dynamic bearing) is one of the major breakthroughs in rotor design in terms of TMR(track misregistration) budget. Although FDB analysis based on Reynolds' equation is well established and popularly being used for FDB design especially for the estimation of bearing stiffness, there are obvious limitations in the approach due to the inherent assumptions. A generalized analysis tool employing the full Navier-Stokes equation and the energy balance is to be beneficial for detailed FDB design. In this publication, an efficient geometry modeling method is presented that provides fully integrated inputs for general FVM/FDM(finite volume method/ finite difference method) codes. By virtue of the flexibility of the presented method, many different detailed FDB design and analysis are carried over with ease.

• Journal of Microbiology
• /
• v.39 no.4
• /
• pp.293-299
• /
• 2001

The nucleocapsid(NP) protein of Newcastle disease virus (NDV) and its derivative (NP$\sub$cfus)containing the myc region and six histidine residues fused to its C-terminus were pcpressed aboundantly in Escherichia coli. The proteins were purified by sucrose gradient centrifugation. Both the NP and NP$\sub$cfus/ proteins self-assem- bled into ring-like particles stacked together to from nucleocapsid-like structure which are heterogeneous in length with a diameter of 20${\pm}$2 nm and central holow of 5${\pm}$1 nm. Only a very small amount of the monomers in the particles was linked by inter-molecular disulfide bonds. Fusion of the C-terminal end to 29 amino acids inclusive of the myc epitope and His tag did not impair ring assembly buy inhibited the formation of the long herringbone structures. Immunogold lableing of the particles with the anti-myc antibody showed that the C-terminus of the NP$\sub$cfus/ protein is exposed on the surface of these ring-like particles.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.41-54
• /
• 2000

The purpose of this study was to investigate various expressions in textile design using CAD and present print design of '01/02 A/W. Four steps were taken in order to achieve this purpose. The first step was to investigate prior research and to analyze textile design methods using CAD. The second step was to study '01/02 A/W fashion trend, especially textile trend. The third step was to design the print design according to textile trend and apply the designed print pattern to real model. The research results are as follows: 1. Textile design is a very important field to help making fashion industry more informative and valuable. 2. Using CAD system in textile design will be very useful and urgent in saving working time and exercising design works. 3. In '01/02 A/W hound's tooth, zigzag, herringbone will be prevalent bold geometric patterns while tartan checks, multi color stripes will be popular too. 4. Textile designs using flower, stripe, checks, dot, abstract pattern were applied to real model, the images of patterns design are as follow, flower pattern-romantic stripe-avantgarde check-cute dotclassic abstract motive-intelligent.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1366-1371
• /
• 2008

Four simulation models of plastic plate heat exchangers are designed and simulated. The flat plate type heat exchanger is designed as the reference model in order to evaluate how much thermal performance increases. The turbulence promoter type heat exchanger is fabricated with cylindrical-type vortex generators and rib-type turbulence promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type heat exchanger has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. The flows are assumed as a three-dimensional, incompressible and turbulent model. The standard k-$\varepsilon$ model is used as the turbulent flow modeling, the SIMPLE algorithm is used to treat the coupling between pressure and velocity, and first order upwind scheme is used for discretization of momentum, turbulent and energy. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.473-473
• /
• 2011

In recent years, organic thin film transistors OTFTs based on conductive-conjugated molecules have received significant attention. We report a fabrication of organic single crystal nanowires that made on Si substrates by liquid bridge-mediated nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the organic single crystal nanowire and the Si substrate. Pentacene is the most promising organic semiconductors. However pentacene has insolubility in organic solvents so pentacene OTFTs can be achieved with vacuum evaporation system. However 6, 13-bis (triisopropylsilylethynyl) (TIPS) pentacene has high solubility in organic solvent that reported by Anthony et al. Furthermore, the substituted rings in TIPS-pentacene interrupt the herringbone packing, which leads to cofacial ${\pi}-{\pi}$ stacking. The patterned TIPS-Pentacene single crystal nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrical properties.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.2
• /
• pp.52-60
• /
• 2009

The purpose of this research is to develop high efficiency plastic plate heat exchangers which can be substituted for conventional aluminum plate heat exchangers. Four simulation models of plastic plate heat exchangers are designed and simulated: that is, flat plate type, turbulent promoter type, corrugate type and dimple type heat exchanger. The flat plate type is designed as the reference model in order to evaluate how much thermal performance increases. The turbulent promoter type is fabricated with cylindrical-type vortex generators and rib-type turbulent promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. Numerical simulation is carried out using the FLUENT code. The flows are assumed as a three-dimensional, incompressible and turbulent model. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type. The tendency of numerical simulation results is in good agreement with that of the experimental results.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.96-101
• /
• 2006

3-D visualization using confocal laser scanning microscopy (CLSM) in a chaotic micromixer was performed as a reproduction experiment and the feasibility of 3-0 imaging technique in the microscale was confirmed. For diagonal micromixer (DM) and two types of staggered herringbone micromixers (SHM) designed by Whitesides et al., to verify the evolution of mixing, cross sectional images are reconstructed at the end of every cycle. In a DM, clockwise rotational flow motion generated by diagonal ridges placed on the floor of micromixer is observed and this motion makes the fluid commingle. On the contrary, there are two rotational flow structures in the SHM and the centers of rotation exchange their position each other every half cycle because of the V shape of ridges varying their orientation every half cycle. Local rotational flow and local extensional flow generated by the complicate ridge pattern make the flow be chaotic and accelerate the mixing of fluid. The dominant parameter that influences on the mixing characteristic of SHM is not the length of micromixer but the number of ridges under the same flow configurations.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.651-658
• /
• 2018

We comprehensively investigated the wrinkles of a stiff layer covering a spherical void embedded in a rubber matrix after the void experienced inflation or contraction. We developed an easy experimental way to realize the inflation and contraction of the voids. The inflation took place in a void right beneath the surface of the matrix and the contraction happened in a void at the bottom of the rubber matrix. In the inflation, the wrinkle at the center of the deformation was random, and the pattern propagated into rabyrinthine, herringbone, and then oriented parallel lines as the position was away from the center of the inflation to the edge. The cracks were concentric, which were perpendicular to the parallel wrinkled pattern. In the contraction, the wrinkle was simply concentric around the surface of the void without any crack. The cracks were found only near the center of the deformation. The strain distribution in the stiff layer after the inflation and contraction was theoretically analyzed with simulations that were in excellent agreement with the experimental results.