• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2460-2464
• /
• 2008

The present paper suggests new method to know the effects of molecular diffusion and the helicity of microchannel flows on mixing in passive micromixers, which are essential components of a microfluidic chip. In this study, 'Helix Index' is newly defined as the magnitude of chaotic advection. Relationship between Helix Index and Mixing Index is analyzed numerically such as the wide range of Peclet and Reynolds numbers in three dimensional serpentine microchannel when using soluble solutions (water/glycerol). As a result, a simple algebraic equation is derived by this relationship based on a regression analysis. The algebraic equation is found to be able to accurately predict the mixing performance without solving the coupled, complex momentum and mass transfer equations.

• Journal of Contemporary Eastern Asia
• /
• 제1권2호
• /
• pp.29-32
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.706-709
• /
• 1997

Extruders are the heart of the polymer processing industry. The single most important mechanical element of a screw extruder is the screw. The proper design of the geometriy of the extruder screw is of crucial importance to the proper functioning of the extruder. If material transport instabilities occur as a result of improper screw geometry, even the most sophisticated computerized control system cannot solve the problem. For this purpose, characteristics design on helix angle of the extruder screw. This paper presents strength of the screw flight, optimum helix angle versus dimensionless down channel pressure gradient, optimum helix angle versus the power law index in simultaneous optimization, volumetric efficiency versus helix angle at various number of flights and power consumption versus helix angle in the barrel of screw extruder.

• Agribusiness and Information Management
• /
• 제3권1호
• /
• pp.23-37
• /
• 2011

The development of informatization impacts all sectors, including agriculture. Agricultural informatization builds the knowledge linkage structures of agricultural innovation systems globally. This study investigated the global knowledge linkage structures in agricultural innovation pertinent to information technology (IT) for agricultural research and development (R&D) investments and activities. We explored the longitudinal trend of systemness within the networked research relationships in the triple helix (TH) of the university, industry and government (UIG). We collected data from publications in the Science Citation Index (SCI), the Social Sciences Citation Index (SSCI), and the Arts and Humanities Citation Index (A&HCI) to analyze the TH network dynamics. We also performed a scientometrics analysis to quantitatively identify the knowledge and insights of global agricultural innovation structures. These results could be informative for individual countries. Our findings reveal that the global knowledge linkage structures in the agricultural sector that are pertinent to IT fluctuate widely and fail to increase the capacity of agricultural innovation research due to a neglect of the network effects of the TH dynamics of UIG.

• Structural Engineering and Mechanics
• /
• 제87권6호
• /
• pp.585-599
• /
• 2023

Geopolymer concrete (GC) can be competently utilized as a practical replacement for cement to prevent a high carbon footprint and to give a direction toward sustainable concrete construction. Moreover, previous studies mostly focused on the axial response of glass fiber reinforced polymer (glass-FRP) concrete compressive elements without determining the effectiveness of repairing them after their partial damage. The goal of this study is to assess the structural effectiveness of partially damaged GC columns that have been restored using carbon fiber reinforced polymer (carbon-FRP). Bars made of glass-FRP and helix made of glass-FRP are used to reinforce these columns. For comparative study, six of the twelve circular specimens-each measuring 300 mm×1200 mm-are reinforced with steel bars, while the other four are axially strengthened using glass-FRP bars (referred to as GSG columns). The broken columns are repaired and strengthened using carbon-FRP sheets after the specimens have been subjected to concentric and eccentric compression until a 30% loss in axial strength is attained in the post-peak phase. The study investigates the effects of various variables on important response metrics like axial strength, axial deflection, load-deflection response, stiffness index, strength index, ductility index, and damage response. These variables include concentric and eccentric compression, helix pitch, steel bars, carbon-FRP wrapping, and glass-FRP bars. Both before and after the quick repair process, these metrics are evaluated. The results of the investigation show that the axial strengths of the reconstructed SSG and GSG columns are, respectively, 15.3% and 20.9% higher than those of their original counterparts. In addition, compared to their SSG counterparts, the repaired GSG samples exhibit an improvement in average ductility indices of 2.92% and a drop in average stiffness indices of 3.2%.

• 한국환경과학회지
• /
• 제33권4호
• /
• pp.257-268
• /
• 2024

This study investigated the growth characteristics of Euonymus japonicus, Hedera helix, and Peperomia puteolata treated with different calcium chloride (CaCl₂) concentrations to evaluate salt tolerance limits in hydroculture cultivation. Six concentrations of CaCl₂ (0, 1, 2, 5, 10, and 15 g·L^-1 referred to as Cont., C1, C2, C5, C10, and C15) were applied to solution - grown plant species. The survival rate, growth index, plant height, plant width, leaf width, leaf length, number of leaves, and relative chlorophyll contents were measured at monthly intervals. Euonymus japonicus, Hedera helix, and Peperomia puteolata survived up to C2, C5, and C10 at each CaCl₂ concentration. The Euonymus japonicus was higher in the C1 treatment than in the Cont. for most growth characteristics. Hedera helix had the highest leaf width, leaf length, and number of leaves in the Cont., a significant difference was observed compared with the C1 treatment. The chlorophyll content did not differ significantly between the C5 and Cont. treatments. The leaf width and length of Peperomia puteolata were greater in the C2 and C1 treatments than in the Cont., whereas the number of leaves and chlorophyll content were the highest in C5. Dry weight analysis revealed that Euonymus japonicus, Hedera helix, and Peperomia puteolata were the lowest in the Cont. treatments. Euonymus japonicus was 74% in C15, and Hedera helix, and Peperomia puteolata were analyzed at approximately 37%- 50% and 9%-14%, respectively, regardless of the concentration in the CaCl₂ treatment groups. In indoor hydroponic cultivation, the salt tolerance limit concentrations of Euonymus japonicus, Hedera helix, and Peperomia puteolata are 2, 5, and 10 g·L^-1, respectively, indicating that hydroculture management techniques should be applied at higher concentrations.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.573-588
• /
• 2016

Carbon Fiber Reinforced Plastic (CFRP) and Titanium Alloy (Ti6Al4V) stack, extensively used in aerospace structural components are assembled by fasteners and the holes are made using drilling process. Drilling of stack in one shot is a complicated process due to dissimilarity in the material properties. It is vital to have optimal machining condition and tool geometry for better hole quality and tool life. In this study the tool wear and hole quality were analysed by experimental analysis using three modified twist drills and online tool condition monitoring using Acoustics Emission (AE) sensor. Helix angle and point angle influence tool performance and cutting force. It was found that a tool geometry (TG1) with high helix angle of $35^{\circ}$ with low point angle $130^{\circ}$ results in reduction in thrust force of 150-500 N range but the TG2 also perform almost similar to TG1, but when compared with the AErms voltage generated during drilling it was found that progressive rise in voltage in TG1 is less with respect to TG2 which can be attributed to tool life. In process wear monitoring was done using crest factor as monitoring index. AErms voltage were measured and correlated with the performance of the drills.

• 한국잠사곤충학회지
• /
• 제43권2호
• /
• pp.116-124
• /
• 2001

STMP로 견 피브로인을 인산화 시키는 반응에서, 처리 조건별로 실험하여 적정 조건을 구하였고, 인이 결합되는 위치를 규명하기 위해 FT-IR과 $^{31}$ P NMR분석을 행했고, 인산화된 견 피브로인의 특성을 평가하여 다음과 같은 결론을 얻었다. 1. 견 피브로인을 STMP로 인산화 시킬 때, 알칼리도가 클수록, 처리 온도가 높을수록 인산화 정도가 증가되었다 2.처리시간에 따른 인산화 정도는 1hr까지는 급격하게 증가하였고, 1hr 이후에는 서서히 증가되어 비교적 단시간에 인산화가 많이 진행되었다. 3. STMP 농도에 따른 인산화 정도는 50%까지는 급격히 증가되지만, 100% 이상에서는 증가가 미약하였다 4. 인산화된 견 피브로인의 FT-IR분석에서, 각 시료는 ∝-helix에 가까운 형태이었고, 아미노기에 의한 인산화 반응(phosphoramidation)은 고려되지 않았다 5. $^{31}$ P NMR분석 결과에서는 인산화가 polyphosphate형태로 되어 있다는것을 알 수 있었다. 6. 인산화가 많이 될수록 탁도와 거품팽창성, 그리고 거품안정성은 증가하였으며, 용해도는 오히려 감소하였다. 무처리 시료에 비해 거품팽창성은 1.6배, 거품안정성은 2배로 증가하였다. 7. 유화력는 시료 P100 까지는 증가되다가 그 이상에서는 약간 감소하는 경향으로 나타났으며, 유화안정성은 인산화 정도가 많이 될수록 증가하였다. 유화력은 최고 18%, 유화안정성은 21%가 증가되었다.

• Journal of Contemporary Eastern Asia
• /
• 제19권1호
• /
• pp.31-42
• /
• 2020

There is great confusion over what constitutes public diplomacy (PD), who its actors are, and the relevance of non-state actors. In the Korean context, in addition to the general fuzziness of the concept, linguistic peculiarities of the terms gonggong and gongjung both of which refer to public, waegyo, which is interchangeably used for international affairs, foreign policy and diplomacy, and juche which is simultaneously used for actor and agent, add more layers of confusion. While the term PD in Korea is based almost entirely on Western conceptualization, these linguistic peculiarities prevent fruitful conversations among scholars and practitioners on PD. Against this background, this research note explores and addresses conceptual ambiguities that pertains to PD and the policy discourse on the topic, particularly on non-state PD in Korea. The paper draws on Korean government's PD-related policy documents and Diplomatic White Papers and all relevant academic articles found in Korean-language journals registered in the Korean Citation Index (KCI), which are analysed to gain an understanding of the PD-related policy discourse in Korea.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.