• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2460-2464
• /
• 2008

The present paper suggests new method to know the effects of molecular diffusion and the helicity of microchannel flows on mixing in passive micromixers, which are essential components of a microfluidic chip. In this study, 'Helix Index' is newly defined as the magnitude of chaotic advection. Relationship between Helix Index and Mixing Index is analyzed numerically such as the wide range of Peclet and Reynolds numbers in three dimensional serpentine microchannel when using soluble solutions (water/glycerol). As a result, a simple algebraic equation is derived by this relationship based on a regression analysis. The algebraic equation is found to be able to accurately predict the mixing performance without solving the coupled, complex momentum and mass transfer equations.

• Journal of Contemporary Eastern Asia
• /
• v.1 no.2
• /
• pp.29-32
• /
• 2002

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.706-709
• /
• 1997

Extruders are the heart of the polymer processing industry. The single most important mechanical element of a screw extruder is the screw. The proper design of the geometriy of the extruder screw is of crucial importance to the proper functioning of the extruder. If material transport instabilities occur as a result of improper screw geometry, even the most sophisticated computerized control system cannot solve the problem. For this purpose, characteristics design on helix angle of the extruder screw. This paper presents strength of the screw flight, optimum helix angle versus dimensionless down channel pressure gradient, optimum helix angle versus the power law index in simultaneous optimization, volumetric efficiency versus helix angle at various number of flights and power consumption versus helix angle in the barrel of screw extruder.

• Agribusiness and Information Management
• /
• v.3 no.1
• /
• pp.23-37
• /
• 2011

The development of informatization impacts all sectors, including agriculture. Agricultural informatization builds the knowledge linkage structures of agricultural innovation systems globally. This study investigated the global knowledge linkage structures in agricultural innovation pertinent to information technology (IT) for agricultural research and development (R&D) investments and activities. We explored the longitudinal trend of systemness within the networked research relationships in the triple helix (TH) of the university, industry and government (UIG). We collected data from publications in the Science Citation Index (SCI), the Social Sciences Citation Index (SSCI), and the Arts and Humanities Citation Index (A&HCI) to analyze the TH network dynamics. We also performed a scientometrics analysis to quantitatively identify the knowledge and insights of global agricultural innovation structures. These results could be informative for individual countries. Our findings reveal that the global knowledge linkage structures in the agricultural sector that are pertinent to IT fluctuate widely and fail to increase the capacity of agricultural innovation research due to a neglect of the network effects of the TH dynamics of UIG.

• Structural Engineering and Mechanics
• /
• v.87 no.6
• /
• pp.585-599
• /
• 2023

Geopolymer concrete (GC) can be competently utilized as a practical replacement for cement to prevent a high carbon footprint and to give a direction toward sustainable concrete construction. Moreover, previous studies mostly focused on the axial response of glass fiber reinforced polymer (glass-FRP) concrete compressive elements without determining the effectiveness of repairing them after their partial damage. The goal of this study is to assess the structural effectiveness of partially damaged GC columns that have been restored using carbon fiber reinforced polymer (carbon-FRP). Bars made of glass-FRP and helix made of glass-FRP are used to reinforce these columns. For comparative study, six of the twelve circular specimens-each measuring 300 mm×1200 mm-are reinforced with steel bars, while the other four are axially strengthened using glass-FRP bars (referred to as GSG columns). The broken columns are repaired and strengthened using carbon-FRP sheets after the specimens have been subjected to concentric and eccentric compression until a 30% loss in axial strength is attained in the post-peak phase. The study investigates the effects of various variables on important response metrics like axial strength, axial deflection, load-deflection response, stiffness index, strength index, ductility index, and damage response. These variables include concentric and eccentric compression, helix pitch, steel bars, carbon-FRP wrapping, and glass-FRP bars. Both before and after the quick repair process, these metrics are evaluated. The results of the investigation show that the axial strengths of the reconstructed SSG and GSG columns are, respectively, 15.3% and 20.9% higher than those of their original counterparts. In addition, compared to their SSG counterparts, the repaired GSG samples exhibit an improvement in average ductility indices of 2.92% and a drop in average stiffness indices of 3.2%.

• Steel and Composite Structures
• /
• v.21 no.3
• /
• pp.573-588
• /
• 2016

Carbon Fiber Reinforced Plastic (CFRP) and Titanium Alloy (Ti6Al4V) stack, extensively used in aerospace structural components are assembled by fasteners and the holes are made using drilling process. Drilling of stack in one shot is a complicated process due to dissimilarity in the material properties. It is vital to have optimal machining condition and tool geometry for better hole quality and tool life. In this study the tool wear and hole quality were analysed by experimental analysis using three modified twist drills and online tool condition monitoring using Acoustics Emission (AE) sensor. Helix angle and point angle influence tool performance and cutting force. It was found that a tool geometry (TG1) with high helix angle of $35^{\circ}$ with low point angle $130^{\circ}$ results in reduction in thrust force of 150-500 N range but the TG2 also perform almost similar to TG1, but when compared with the AErms voltage generated during drilling it was found that progressive rise in voltage in TG1 is less with respect to TG2 which can be attributed to tool life. In process wear monitoring was done using crest factor as monitoring index. AErms voltage were measured and correlated with the performance of the drills.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.2
• /
• pp.116-124
• /
• 2001

To improve the functional properties as a food, silk fibroin was phosphorylated with STMP In the phosphorylation reaction of silk fibroin, the degree of phosphorylation was increased with high alkali index and treatment temperature. Depending on treatment time and concentration of STMP it was rapidly increased up to 1hr. and 50%, but slowly above that time and 100%. It was indicated in the results of FT-IR analysis and $\^$31/p NMR spectroscopy of phosphorylated fibroin that it had a close ∝-helix and poly-phosphate structure. The more phosphorylation of fibroin made more turbidity, foam expansion and foam stability, but less solubility. Emulsifying activity was increased up to P100, but slightly decreased above Pl00 and emulsifying stability was constantly increased on the progressing of phosphorylation.

• Journal of Contemporary Eastern Asia
• /
• v.19 no.1
• /
• pp.31-42
• /
• 2020

There is great confusion over what constitutes public diplomacy (PD), who its actors are, and the relevance of non-state actors. In the Korean context, in addition to the general fuzziness of the concept, linguistic peculiarities of the terms gonggong and gongjung both of which refer to public, waegyo, which is interchangeably used for international affairs, foreign policy and diplomacy, and juche which is simultaneously used for actor and agent, add more layers of confusion. While the term PD in Korea is based almost entirely on Western conceptualization, these linguistic peculiarities prevent fruitful conversations among scholars and practitioners on PD. Against this background, this research note explores and addresses conceptual ambiguities that pertains to PD and the policy discourse on the topic, particularly on non-state PD in Korea. The paper draws on Korean government's PD-related policy documents and Diplomatic White Papers and all relevant academic articles found in Korean-language journals registered in the Korean Citation Index (KCI), which are analysed to gain an understanding of the PD-related policy discourse in Korea.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.107-113
• /
• 2003

이 논문에서는 ER 시그날 시퀀스 서열의 존재 여부와 단백질에의 알파헬릭스 형태의 막횡단 부위를 예측하는 통합시스템을 개발하였다. 기존의 시스템과 달리 이 두 가지 예측을 하나의 통합된 시스템에서 수행하여 예측의 정확성을 높였다. 또한 인터넷에서 이용이 가능하도록 웹 서버(http://dblab.sejong.ac.kr/pass/index.html)를 구현하였다.