• Structural Engineering and Mechanics
• /
• 제52권5호
• /
• pp.875-887
• /
• 2014

The aim of the shaking table experiment is to verify the isolation effect of a storage liquid tank with multiple friction pendulum bearings. A 1:20 scale model of a real storage liquid tank that is widely used in the petroleum industry was examined by the shaking table test to compare its anchored base and isolated base. The seismic response of the tank was assessed by employing the time history input. The base acceleration, wave height and tank wall stress were used to evaluate the isolation effect. Finally, the influences of the bearing performance that characterizes the isolated tank, such as the friction force and residual displacement, were discussed.

• 국제초고층학회논문집
• /
• 제1권3호
• /
• pp.221-228
• /
• 2012

Shanghai Tower is a super high-rise building of 632 m height with 'mega frame-core- outrigger truss' structure system. Due to the complexity and irregularity of structure, shaking table test was carried out to investigate its seismic performance. A 1/40 scaled test model was designed, built and tested on shaking table under earthquake of small, moderate and large levels. The experimental results showed that the structure can meet the requirements of Chinese codes and reach scheduled performance objectives. Elastic and plastic time-history analysis on the structure were carried out and the results were compared to experimental results. Based on the research results some suggestions were proposed to contribute favorable effect on the seismic capacity of the structure.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.70-76
• /
• 2022

Calcium-phosphate-based bioceramics are promising biomaterials for scaffolds because they can assist in bone regeneration. In this study, a laser sintering deposition system was developed, and 3D hydroxyapatite (HA) scaffolds were fabricated. The main process conditions of the HA scaffolds were laser power, table velocity, and laser focal distance. As the laser power increased, the line width, line height, and layer thickness also increased. Further, the line width, line height, and layer thickness decreased as the table velocity increased. As the laser focal distance increased, the line width increased, but the line height and layer thickness decreased. The fabricated green scaffolds were sintered at 1050 ℃ and 1150 ℃. The sintered scaffolds had a uniform and continuous interconnected shape, with pore sizes ranging from 850 to 950 ㎛ having 53% porosity. The compressive strength of the scaffolds decreased from 0.72 MPa (1050 ℃) to 0.53 MPa (1150 ℃). The biocompatibility of the scaffolds was investigated by analyzing the adhesion of osteoblast-like MG-63 cells cultured on the surfaces of the scaffolds. The results indicate that the scaffold sintered at 1050 ℃ had good mechanical and biological properties compared to that at 1150 ℃.

• 사상체질의학회지
• /
• 제10권2호
• /
• pp.221-270
• /
• 1998

Objective This research is a study about constitutional diagnosis through the external appearances as a basic principle, and it is for finding shape differences of the ear, eye, nose, mouth according to the Sasang constitution Method We have collected 209 cases of patients of the Sasang Constitutional Department, including employees of the Kyung-Hee Medical Center and took pictures of the frontal view, lateral view, oblique view of face and measured heights, deapth, breadths of ear, eye, nose, mouth with 'The Measurement of R. Martin'. We analyzed shape differences of the face according to the Sasang constitution with certain results Results We got the morphologic characteristics of ear, eye, nose and mouth according to the Sasang constitution as Table 3. -Table 10. Conclusion : 1. The morphologic characteristics of Ear according to the Sasang constitution (1) Morphologic ear length, Physiognomic ear length, Ear lobule length is longer in Taeumin than Soeumin. (2) Physiognomic ear breadth is wider in Taeumin than Soeumin. (3) Physiognomic ear length, lobule length ratio is higher in Taeumin than Soyangin. 2. The morphologic characteristics of Eye according to the Sasang constitution. (1) Inner Palpebral fissure width, 5th Palpebral fissure length, Bizygomatic breadth-Outercanthal distance is the longest in Taeumin (2) Palpebral fissure inclination is widest in Soeumin. (3) Palpebral fissure length is longer in Taeumin than Soeumin. (4) Pupillary diameter ratio is the lowest in Taeumin (5) Palpebral fissure length, width ratio is higher in Soeumin than Taeumin. (6)zygomatic breadth, Bizygomatic breadth-Outercanthal distance ratio is the higher in Taeumin than Soeumin. 3. The morphologic characteristics of Nose according to the Sasang constitution. (1) Nasion depth is deepest in Soyangin. (2) Nasion to pupillary depth is deeper Soyangin than Taeumin. (3) Nasal tip depth, Nostril to Nasalalar depth is deeper Soyangin than Taeumin. (4) Subnasale to Nasalalar depth is the shallowest in Taeumin (5) Nasalalar height is lowest in Soeumin. (6) Nasalalar to Nostril distance is deeper Taeumin than Soeumin. (7) Nasal tip depth, Nasal depth ratio is the highest in Taeumin (8) Nasal depth Nasalalar heightratio is lowest in Soeumin. (9) Midfaceheight, Nasal tip depth ratio is higher Soyangin than Taeumin. 4. The morphologic characteristics of mouth according to the Sasang constitution. (1) Lower mid lip height, Lower philtrum height, Lower quarter lip height, Total middle lip height, Total philtrum height, Total quarter lip height is the shottest in Soyangin. (2) Upper mid lip height, Upper philtrum height is longer in Taeumin than Soyangin (3) Lip inclination is higher in Soeumin than Soyangin. (4) Intercheilion breadth, total height ratio is lowest in Soyangin. (5) Total lip height, Upper philtrum height ratio is higher in Soyangin than Soeumin. (6) Lower lip height Lower quarter lip height ratio is higher in Soyangin than Taeumin. (8) Total lip area is wider in Taeumin than Soyangin.

• 한국지진공학회논문집
• /
• 제22권7호
• /
• pp.369-378
• /
• 2018

Full-scale seismic retrofit of old and deteriorated masonry buildings requires a lot of cost and time. In such buildings, installing an emergency evacuation space can be considered as an alternative. In this study, requirements of the earthquake-proof table used as an emergency evacuation space for buildings hit by earthquake are investigated. Load conditions required for the table, including the impact effects due to building debris drop, are explained. To investigate the impact effects in more detail, weight drop test is performed for an prototype earthquake-proof table. In the test, the weight of the falling object and free fall height were considered as the main test parameters. The results showed that the duration of impact is very short (0.0226~0.0779sec), and thus the impact forces increase to 15.8~45.2 times the weight of the falling object. Based on these results, design considerations and performance verification criteria of the earthquake-proof table as an emergency evacuation space are given.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.635-642
• /
• 2013

We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.691-703
• /
• 2022

To obtain the seismic response of lead-cored rubber, shape memory alloy (SMA)-rubber isolation Plate-shell Integrated Concrete Liquid-Storage Structure (PSICLSS), based on a PSICLSS in a water treatment plant, built a scale experimental model, and a shaking table test was conducted. Discussed the seismic responses of rubber isolation, SMA-rubber isolation PSICLSS. Combined with numerical model analysis, the vibration characteristics of rubber isolation PSICLSS are studied. The results showed that the acceleration, liquid sloshing height, hydrodynamic pressure of rubber and SMA-rubber isolation PSICLSS are amplified when the frequency of seismic excitation is close to the main frequency of the isolation PSICLSS. The earthquake causes a significant leakage of liquid, at the same time, the external liquid sloshing height is significantly higher than internal liquid sloshing height. Numerical analysis showed that the low-frequency acceleration excitation causes a more significant dynamic response of PSICLSS. The sinusoidal excitation with first-order sloshing frequency of internal liquid causes a more significant sloshing height of the internal liquid, but has little effect on the structural principal stresses. The sinusoidal excitation with first-order sloshing frequency of external liquid causes the most enormous structural principal stress, and a more significant external liquid sloshing height. In particular, the principal stress of PSICLSSS with long isolation period will be significantly enlarged. Therefore, the stiffness of the isolation layer should be properly adjusted in the design of rubber and SMA-rubber isolation PSICLSS.

• 한국과학교육학회지
• /
• 제4권1호
• /
• pp.15-25
• /
• 1984

The purpose of this study is to develop a practical and ideal model of science laboratory enrolled 48-60 students by studying optimal facilities such as laboratory tables and chairs proper to elementary school settings. The science laboratory model was figured out in terms of the following six procedures; (1) Current status as well as problems of science laboratory and its facilities was identified by means of the questionnaires conducted to 201 elementary schools, using stratified cluster sampling tehnique, under the consideration of the school size and the regional characteristics across the country. (2) Collected were the anthropometric data with respect to sitting height, popliteal height, buttock popliteal length, elbow rest height, and back width from the 747 students, 4th-6th grade, in Seoul area. (3) It was measured the work apace necessary for individual student to perform his experiment. (4) Using the data of the process (2), we determined the optimal sizes of laboratory tables and chairs fitted for Korean elementary school students. (5) The optimal area of science laboratory for 48-60 students is determined in terms of the data obtained in (3) for individual work space in addition to the appropriate table size figured out by (4). (6) A practical and ideal model for a science laboratory in elementary school was designed according to the above procedures. For the optimal model of science laboratory, the results of this study can be summarized as follows: The sizes of chair and table are categorized into three groups such as small, medium, and large depending on students' physical outfit. The small size base on the 12.5th percentile point of students' sitting height is used for students of the 0-25th percentile ranks. The medium size base on the 50th percentile point of students' sitting height is used for students of the 26-75th percentile ranks. The large size base on the 87.5th percentile point of students' sitting height is used for students of the 76-100th percentile ranks. (1) Sizes of chairs: The small size is 28cm in width and 33cm in height. The medium size is 31cm in width and 36cm in height. The large size is 35cm in width and 38cm in height. (2) Sizes of laboratory tables: The small size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 60cm in height. The large size is 120cm in length, 86cm in width, and 65cm in height. (3) Size of science laboratory: The optimal science laboratory for 48-60 elementary school students, which can install the 12 laboratory tables, is 12m in length and 10m in width.

• 대한가정학회지
• /
• 제20권4호
• /
• pp.155-168
• /
• 1982

What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

• 한국콘텐츠학회논문지
• /
• 제11권10호
• /
• pp.349-354
• /
• 2011

투시검사실내 공간산란선 분포에 대한 정확한 정보와 환자, 검사 자 등에 대한 피폭을 줄이고자 투시용방사선 발생장치를 이용한 실험결과는 다음과 같았다. 테이블과 동일한 높이의 경우 산란선은 50 cm지점과 250 cm 지점에서 0.78 mGy/min ~ 0.04 mGy/min (95 %), 테이블 하 방향 50 cm의 경우 0.17 mGy/min ~ 0.02 mGy/min (86 %), 테이블 상 방향 50 cm 의 경우 1.37 mGy/min ~ 0.05 mGy/min (96 %) 로 감소하였고 상 방향 50 cm 보다 수평지점에서 50 ~ 60% 선량 감소를 나타냈고 하 방향 50 cm 지점에서는 90 ~ 95%정도의 감소율을 나타냈다. 조사야 조절장치의 경우 25%로 줄였을 때 50 cm 지점에서 0.78 mGy/min 에서 0.16 mGy/min 으로, 250 cm 지점에서 0.04 mGy/min 에서 0.01 mGy/min으로 평균 80% 정도 감소하였다. 피사체의 유무의 경우 피사체가 없는 경우 모든 측정지점에서 평균 96.7% 공간 산란선량이 감소하였다.