• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1508-1511
• /
• 1997

In this paper, design parameters of Rapid Thermal Processing(RrW) to minimize the wafer tempera ture uniformity errors are proposed. 1,anip ling positions and the wafer height are important parameters for waf er temperature uniformity in R'I'P. We propose the method to seek lamp ling positions and the wafer height for optimal temperature uniformity. l'he ~~roposed method is applied to seek optimal lamp ling positions and the waf er height of 8 inch wafer. 'I'o seek the optimal lamp ling positions and the wafer height, we var\ulcorner. lamp ling 110s itions and the wafer height and then formulate the wafer temperature uniformity problem to the linear programmi ng problem. Finally, it is shown that the wafer temperature uniformity in RI'I' designed by optimal prarneters is improved to comparing with Ii'l'P designed by the other method.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.25-32
• /
• 1983

To obtain basic information on the breeding of burley tobacco, classification of 41 varieties was carried out by using the cluster analysis of correlation coefficients and taxonomic distance based on twenty-one agromonic characters. Eight characters, such as days to flowering, length of flower axis, internode length, leaf length, yield, leaf angle to stem, vein angle to midrib and plant height, were useful in monothetic classification. Forty-one varieties were classified into four groups (I, II, III and IV) with weighted variable group method (WVGM ) and weighted jai. group method(WPGM), whereas the results classification of 33 varieties among them by WVGM were coincident with the results by WPGM. As for the characteristics of each group, group I related to late maturity, tall height and high yield, group II related to intermediate maturity, tall height and low yield, group 19 related to early maturity, intermediate height and low yield, and group W related to early maturity, short height and intermediate yield.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.895-903
• /
• 2005

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path which is computed by slicing the deformed CL surface is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path generated by the proposed method is tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2001.11a
• /
• pp.99-104
• /
• 2001

This paper is contents that experiment exhaust performance of contaminant by establishment height gas table and hood establishment height. Hood made to control from gas table to 10 centimeters space from 30 centimeters to 70 centimeters. Exhaust fan operated by 110V, 160V, 220V, and gas used propane gas. Center part appeared highest as result that measure wind velocity and temperature from hood lower part. Wind velocity from hood lower part was proved that dominate contaminant exhaust performance. Exhaust performance of carbon dioxide and heat showed that 30 centimeters case overmatches because establishment height of hood compares 80 centimeters. Case of carbon dioxide of exhaust performance by establishment height of hood overmatched more than heat.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.

• Journal of Korean Academy of Nursing
• /
• v.36 no.8
• /
• pp.1331-1339
• /
• 2006

Purpose. The purpose of this study was to test the effects of infant massage (auditory (mother's voice), tactile/ kinesthetic (massage) and visual (eye to eye contact) stimulation) on weight and height of infant and mother-infant interaction with normal infants over a period of 4 weeks. Method. This study was designed as a nonequivalent control group pretest-posttest design. The experimental group infants (aged 2-6 months) participated in one of the infant massage programs at the health district center for 4 weeks. The control group (N=26) was paired with the experimental group (N=26) by matching the infant's age and sex. Infant weight, height, and mother-infant interaction were measured two times and recordings of the mother-infant interaction were done using the video equipment in a room at the health center for 10 minutes. Results. After 4 weeks of massage, there were no significant differences weight gain and height increase between the two groups. Comparison of the total scores for the mother-infant interaction between the two groups showed a significant difference (t=5.21, p=.000). There were also significant differences on maternal response (t=3.78, p=000), infant response (t=5.71, p=000) and dyadic response (t=4.05, p=000) in the mother-infant interaction between the two groups. Conclusion. Overall, the results of this study reassure that infant massage facilitates the mother-infant interaction for infants and mothers who give massage to their baby.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.333-354
• /
• 1990

This study was designed to analyse vertical dysplasia such as open bite or deep bite in persons with skeletal Class III malocclusion. The subjects consisted of 60 control patients, 40 Class III open bite patients and 40 Class III deep bite patients. The mean age was 19.8 years in the control group, 17.8 years in the Class III open bite group and 16.5 years in the Class III deep bite group. The results were as follows: 1. In Class III malocclusion patients, the characteristics of the vertical dysplasia are under the palatal plane. 2. In Class III malocclusion patients, the items showing the characteristics of the vertical dysplasia are mandibular plane angle, lower gonial angle, lower facial height, dental height & inclination of the upper first molar, interincisal angle, maxillary & mandibular occlusal plane angle. 3. In Class III malocclusion patients, LPFH/LAFH ratio shows the highest significance among the facial height ratios. 4. In Class III malocclusion patients, open bite group has a upward cant of maxillary occlusal plane & downward cant of mandibular occlusal plane. And deep bite group has a downward cant of maxillary occlusal plane & upward cant of mandibular occlusal plane. 5. In Class III malocclusion patients, the molar teeth of the open bite group are measially inclined and those of the deep bite group are upright.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.66-72
• /
• 2005

An electromagnetic inductive sensor consisted of one exciter and three separated (triple) detectors has been developed for both tracking the weld seam of a workpiece and controlling the sensor-to-workpiece distance (height) simultaneously. The left and right detectors are used to track the seam, while the fore and the other two detectors allow the sensor to determine the height and the gap width by being coupled their outputs together. A series of experiments with the proposed sensor located above a mild steel plate containing a weld seam of gap are carried out to examine the feasibility of the sensor. The results revealed that the proposed sensor could fairly well track the desired seam and also well control the height to be constant even when the gap width of the seam varied. The gap width can be also determined during the seam tracking by using the sensor outputs. As a consequence, these can provide the developed sensor with substantial improvement for industrial uses with respect to the previous electromagnetic sensors being used for the weld seam tracking.

• Nutritional Sciences
• /
• v.5 no.3
• /
• pp.155-160
• /
• 2002

The purpose of this study was to investigate the effects of micronutrient supplementation on the growth of preschool children in China. A double-blind, placebo-controlled trial was conducted on 156 growth retarded preschool children who were randomly assigned to the following five groups : supplemental control (S-control; n=28); zinc supplementation (＋Zn; 3.5mg Zn/day, n=34); zinc and calcium supplementation (＋ZnCa; 3.5mg Zn ＋ 250mg Ca/day, n=37); zinc, calcium and vitamin A supplementation (＋ZnCaVA; 3.5mgZn ＋ 250mgCa ＋ 200gVA/day, n=28); and calcium and vitamin A supplementation (＋CaVA; 250mgCa ＋ 200gVA/day, n=29). Another 34 children of normal height were selected as a normal control (N-control). Supplementation continued for twelve months. After supplementation, the height gains in the ＋Zn group (7.84cm per year) and the ＋ZnCa group (7.70 cm per year) were significantly higher than that in the S-control group (6.74 cm per year, P＜0.05). The weight gain in the ＋ZnCaVA group (2.55kg per year) and the ＋CaVA group (2.57 kg per year) was also significantly higher than that in the S-control group (2.19 kg per year, P＜0.05). The average number of days of illness in each group taking supplements was lower than that in the S-control group (13 days per year compared with 23 days per year). No significant differences in bone maturity were observed between the groups. In conclusion, in this study Zinc and Zinc ＋ Calcium supplementation improved the height gain, and vitamin A improved the weight gain, in growth retarded preschool children, but these supplements did not affect the maturity of bone. Micronutrient supplementation also lowered the morbidity of these children.

• Journal of Acupuncture Research
• /
• v.22 no.2
• /
• pp.141-146
• /
• 2005

Objectives: To investigate the effect of Ginseng herbal acupuncture at GB39 and ST36 on growth in mice. Methods: Mice were divided into four groups (n=10); G-ST36 group treated with Ginseng Radix herbal acupuncture at right ST36, G-GB39 group treated with the same at GB39, Control-ST36 group and Control-GB39 group injected with saline at right ST36 and GB39 respectively. The saline injection and herbal acupuncture were performed 3 times a week for 3 weeks. The length( total height, body length and tail length), weight and the protein efficiency ratio were measured as well as IGF-I level in serum Results: The weights of Ginseng herbal acupuncture groups were not significantly increased compared to the control groups but the protein efficiency ratios were significantly higher in Ginseng herbal acupuncture groups compared to the control groups. The increases of the total length, body length and tail length were significantly higher in Ginseng herbal acupuncture groups than the control groups. The serum IGF-I level of G-GB39 was significantly increased compared to control-GB39, not that of G-ST36 compared to control-ST36. Conclusions: Ginseng herbal acupuncture at GB39 and ST36 are both effective to promote growth in terms of height and weight. GB39 may be effective for growth by way of increasing IGF-I, and more closely related to growth in height than ST36.