• Solar Energy
• /
• v.19 no.1
• /
• pp.77-86
• /
• 1999

The optimal thermal design of a single heat source on one wall of a vertical open top cavity was studied experimentally. The temperature and flow fields in the cavity were visualized. The objectives of this study is to obtain the best location of the single heat source and to examine the effects of heat source protrusion, substrate thermal conductivity and cavity aspect ratio on the natural convection cooling due to a single heat source. As the results, the cooling effect for the copper substrate is superior to that of the epoxy-resin substrate and is improved with increasing cavity width. For the epoxy-resin substrate of lower conductivity, the protrusion of the heaters plays a role in decreasing the cooling effect. The best location was the mid-height of the substrate.

• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.82-89
• /
• 2009

Unlike concrete bridge, steel bridge resists external force by forming thin plate. Thus, because steel girder bridge has big slenderness ratio, buckling is a major design factor. Plate girder consists of flange and web plate. Because of economic views, web plate that resists shear forces is made by more thinner plate. Thus, web plate has much risk for buckling. The objective of this study is to analyze the buckling behaviors of plate girder and to present the proper reinforcement location of longitudinal stiffeners. Various parametric study according to the change of web height, transverse stiffeners and load condition are examined.

• Journal of Distribution Research
• /
• v.10 no.1
• /
• pp.33-57
• /
• 2005

After 1990's, many multi-level marketing companies lave been introduced in Korea. These MLM companies operate their stores as same way as general retailing stores. The major characteristics of these MLM companys' store is that their main customers are distributors who sell the purchased merchandise to another customers. Many studies about merchandise display in general retailing stores were reported. But, there was less research about merchandise display in these special type stores such as MLM companys' stores. This paper investigates the effects of merchandise display on distributor's merchandise selection in channel flow of multi-level marketing company. For this purpose, we formulated four hypotheses about display variance in quantity, height, location, and related merchandise to analyze the effect of merchandise display methods in MLM companys' stores. The experiment had been proceeded in three stores in a MLM company for 6 weeks and the sales data were collected by POS. The methods to analyze the data were used ANOVA and T-test. Findings of this study are as follows; First, there was no effect to store sale by the interaction effect between merchandise display method and scale of store. Second, scale of store affected considerably the volume of sales of each store according to main effect analysis. Third, display variance in quantity, height, and location did not affect store sale. In the related merchandise display, however, sale in all store was increased. Fourth, in additional analysis considering merchandise display only, display variance in both height and location affected their sale in large scale store. Based on the above results, we may predict merchandise display can affect sale in MLM companys' store as well as general retailing stores. Therefore if MLM company has large scale store, it should consider merchandise display methods in its stores.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.748-752
• /
• 2014

Background Gynecomastia is benign enlargement of breast tissue in males and is fairly common. Mastectomy not only helps in improving the shape of anterior chest, but can also improve the location of nipple. Therefore, a principle element of mastectomy design is defining the normal location of nipple based on major anatomical reference points. Here, the nipple location was compared for before and after gynecomastia surgery. In addition, the same was also compared between male patients undergoing gynecomastia surgery and control group of subjects without gynecomastia. Methods We retrospectively analyzed gynecomastia patients who underwent conventional subcutaneous mastectomy. Preoperative and postoperative anatomical landmark distances and chest circumferences were measured and compared to the same anthropometric data from 20 healthy adult male controls. Results Nipple locations were compared among 13 patients and 20 controls. The mean weight of resected breast tissue was 246 g, and overall patient satisfaction grade was 4.3 out of 5. In the patient group, the slopes for the height-distance from the sternal notch to the nipple and chest circumference-distance between the mid-line of the sternum and the nipple were 0.175 and 0.125 postoperatively, respectively. The slopes of the control group were 0.122 and 0.177, respectively; these differences were statistically significant (P<0.05). Conclusions Nipple positions were considerably lower in patients with gynecomastia than in control subjects. Subcutaneous mastectomy was associated with mild elevations, but postoperative locations were still lower compared to controls. Further efforts are needed to improve the location of postoperative nipple-areola complex in patients with gynecomastia.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1142-1149
• /
• 2003

The present study describes a numerical analysis for simulation of the sloshing of flows with free-surface which contained in a rectangular tank moving in harmonic or pitching motion. The VOF function, representing the volume fraction of a cell occupied by the fluid, is calculated for each cells, which gives the location of the free-surface filling any some fraction of cells with fluid. The time-dependent changes of free-surface height are used for visualization subject to several conditions such as fluid height, horizontal acceleration, sinusoidal motion, and viscosity. The free-surface heights were used for comparing wall-force, which is caused by sloshing of flows. Damping effects by baffles were extensively investigated for various conditions in terms of baffle shape and position.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.83-91
• /
• 1999

In this paper, we suggest a virtual machining system that can simulate cutting forces of ball end milling at the stage of part design. Cutting forces, here, are estimated from the machanistic model that uses the concept of specific cutting farce coefficient. To this end, we need undeformed chip thickness which is used for calculating chip load. It is derived from the Z-map data of a CAD model. That is, chip load is the height difference between the cutting tool and the workpiece at an arbitrary position. The tool contact point is referred from the cutter location data. On the other hand, the workpiece height is acquired from the Z-map model of a CAD data. From the experimental verification, we can simulate machining process effectively to the slot and the side cutting of ball end mill.

• ALGAE
• /
• v.20 no.1
• /
• pp.31-36
• /
• 2005

Scinaia latifrons Howe occurs in rhodolith beds between 9 to 27 m depths at San Lorenzo channel, Gulf of California, Mexico. As very little was known about the morphometrics of this normally temperate species in a subtropical area, we investigated the phenological changes from December 1998 to December 1999. The gametophytic phase of the species was present from late February to late May, which represented a shorter time period to other known species in the genus. Our results suggested that two gametophytic cohorts develop over winter and early spring based on the size class structure of the frond height. Thalli became reproductively mature at a small size (1-2 cm in height) and all the plants were monoecious. Scinaia latifrons at the study location underwent allometric growth, indicated by the lack of correlation between size, width of the plants, or branching patterns.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.9
• /
• pp.1175-1184
• /
• 2000

Effects of porous wind fences on the wind erosion of particles from a triangular sand pile were investigated experimentally. The porous fence and sand pile were installed in a simulated atmospheric boundary layer. The mean velocity and turbulent intensity profiles measured at the sand pile location were well fitted to the atmospheric boundary layer over the open terrain. Flow visualization was carried out to investigate the motion of windblown sand particles qualitatively. In addition, the threshold velocity were measured using a light sensitive video camera with varying the particle size, fence porosity $\varepsilon$ and the height of sand pile. As a result, various types of particle motion were observed according to the fence porosity. The porous wind fence having porosity $\varepsilon$=30% was revealed to have the maximum threshold velocity, indicating good shelter effect for abating windblown dust particles. With increasing the sand particle diamter, the threshold velocity was also increased. When the height of sand pile is lower than the fence height, threshold velocity is enhanced.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.537-546
• /
• 2011

This paper introduces an automated method for building height recovery through the integration of high-resolution satellite images and digital vector maps. A cross-correlation matching method along the vertical line locus on the Ikonos images was deployed to recover building heights. The rational function models composed of rational polynomial coefficients were utilized to create a stereopair of the epipolar resampled Ikonos images. Building footprints from the digital maps were used for locating the vertical guideline along the building edges. The digital terrain model (DTM) was generated from the contour layer in the digital maps. The terrain height derived from the DTM at each foot of the buildings was used as the starting location for image matching. At a preset incremental value of height along the vertical guidelines derived from vertical line loci, an evaluation process that is based on the cross-correlation matching of the images was carried out to test if the top of the building has reached where maximum correlation occurs. The accuracy of the reconstructed buildings was evaluated by the comparison with manually digitized 3D building data derived from aerial photographs.

• Coupled systems mechanics
• /
• v.6 no.1
• /
• pp.97-111
• /
• 2017

The present paper reports an analytical study of delamination fracture in the Mixed Mode Flexure (MMF) functionally graded beam with considering the material non-linearity. The mechanical behavior of MMF beam is modeled by using a non-linear stress-strain relation. It is assumed that the material is functionally graded along the beam height. Fracture behavior is analyzed by the J-integral approach. Non-linear analytical solution is derived of the J-integral for a delamination located arbitrary along the beam height. The J-integral solution derived is verified by analyzing the strain energy release rate with considering the non-linear material behavior. The effects of material gradient, crack location along the beam height and material non-linearity on the fracture are evaluated. It is found that the J-integral value decreases with increasing the upper crack arm thickness. Concerning the influence of material gradient on the non-linear fracture, the analysis reveals that the J-integral value decreases with increasing the ratio of modulus of elasticity in the lower and upper edge of the beam. It is found also that non-linear material behavior leads to increase of the J-integral value. The present study contributes for the understanding of fracture in functionally graded beams that exhibit material non-linearity.