• 제목/요약/키워드: Height and location

검색결과 677건 처리시간 0.026초

A large eddy simulation on the effect of buildings on urban flows

  • Zhang, Ning;Jiang, Weimei;Miao, Shiguang
    • Wind and Structures
    • /
    • 제9권1호
    • /
    • pp.23-35
    • /
    • 2006
  • The effect of buildings on flow in urban canopy is one of the most important problems in local/micro-scale meteorology. A large eddy simulation model is used to simulate the flow structure in an urban neighborhood and the bulk effect of the buildings on surrounding flows is analyzed. The results demonstrate that: (a) The inflow conditions affect the detailed flow characteristics much in the building group, including: the distortion or disappearance of the wake vortexes, the change of funneling effect area and the change of location, size of the static-wind area. (b) The bulk effect of the buildings leads to a loss of wind speed in the low layer where height is less than four times of the average building height, and this loss effect changes little when the inflow direction changes. (c) In the bulk effect to environmental fields, the change of inflow direction affects the vertical distribution of turbulence greatly. The peak value of the turbulence energy appears at the height of the average building height. The attribution of fluctuations of different components to turbulence changes greatly at different height levels, in the low levels the horizontal speed fluctuation attribute mostly, while the vertical speed fluctuation does in high levels.

GPS 및 토탈스테이션을 이용한 대학시설물 현황측량의 성과분석 (Evaluation of GPS and Totalstation Surveying for University Facilities Mapping)

  • 박병욱;이대근;서상일
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2003년도 추계학술발표회 논문집
    • /
    • pp.43-48
    • /
    • 2003
  • This study presents the detailed methods for university facilities mapping using GPS and totalstation. In the control survey by GPS network adjustment, the level of significance for the height value of fourth order triangulation stations was estimated about loom. The accuracy analysis of height determination by totalstation for the traverse points showed that the RMSE came out 9mm to the basis of direct leveling, so it indicated that trigonometric leveling by totalstation was correct comparatively. For GPS/RTK method, the result of accuracy analysis about traverse points showed that the RMSE came out 33㎜ in horizontal location to the basis of totalstation's outcome and 15㎜ in height value to the basis of direct leveling. In the construction survey, GPS/RTK surveying is quicker and more economical than totalstation surveying in the feasible areas of GPS surveying, but there were many impossible areas lot GPS/RTK surveying by the obstacles like a building.

  • PDF

객석배치 대안의 가시성능 평가 및 예측기술에 관한 연구 (A Study on Techniques to Evaluate Auditorium Assignment Visible Efficiency)

  • 김석태
    • 한국실내디자인학회논문집
    • /
    • 제21권5호
    • /
    • pp.106-113
    • /
    • 2012
  • A study on techniques to evaluate auditorium assignment visible efficiency using three-dimensional simulation. The most important thing to be considered is to ensure the visibility to the podium upon assigning auditorium of venues, classrooms or seminar rooms. However, since there are so many variables to be considered such as the form of the stage, the area and height of the stage, size of screen, and the distance and angle of the auditorium from the podium, the methods to assign auditorium are staying at the level of basic for a long time. Thus, in this study, we proposed simulation methodology to quantitatively evaluate the three-dimensional visible efficiency based on Visual Graph Analysis (VGA) theory. After analytical methodology manufactures application, it sets examples of visibility depending on location of screen, visibility depending on degree of height difference and visibility about three-dimensional Mass Zoning like a stage and verifies the efficacy. In addition, based on results, visibility expectation curve is drawn and the method to calculate the stepped height depending on necessary visibility is proposed.

  • PDF

Refinement Module 기반 Three-Scale 보행자 검출 기법 (A Three-scale Pedestrian Detection Method based on Refinement Module)

  • 정경민;박수용;이현
    • 대한임베디드공학회논문지
    • /
    • 제18권5호
    • /
    • pp.259-265
    • /
    • 2023
  • Pedestrian detection is used to effectively detect pedestrians in various situations based on deep learning. Pedestrian detection has difficulty detecting pedestrians due to problems such as camera performance, pedestrian description, height, and occlusion. Even in the same pedestrian, performance in detecting them can differ according to the height of the pedestrian. The height of general pedestrians encompasses various scales, such as those of infants, adolescents, and adults, so when the model is applied to one group, the extraction of data becomes inaccurate. Therefore, this study proposed a pedestrian detection method that fine-tunes the pedestrian area by Refining Layer and Feature Concatenation to consider various heights of pedestrians. Through this, the score and location value for the pedestrian area were finely adjusted. Experiments on four types of test data demonstrate that the proposed model achieves 2-5% higher average precision (AP) compared to Faster R-CNN and DRPN.

2자유도 Contact Slider 모델의 동특성 해석 (Analysis of Dynamic characteristic of 2-DOF Contact Slider)

  • Park, Kyoung-Su;Chun, Jeong-Il;Park, Young-Pil
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 춘계학술대회논문집
    • /
    • pp.924-929
    • /
    • 2001
  • The flying height of contact slider is determined by vertical and pitching motions of slider. This paper performed the computer simulation for flying height change of contact slider. It is changed by many parameters, contact stiffness, contact damping, air bearing stiffness ratio, a location of mass center, and so on. Computer simulation is performed for knowing for what change of these parameters influences in flying height of contact slider. Disk surface is modeled in harmonic wave with from 10㎑ to 600㎑. Tri-pad slider is modeled in that contact slider has 2-DOF motion (vertical motion, pitching motion). Tri-pad contact slider is analyzed by numerical analysis method in computer simulation.

  • PDF

A Research on Forage Yield and Its Components In Response to Different Sowing Rate and Row Distance of Sorghum (Sorghum bicolor Moench.) in Turkey

  • Altin, Murat;Tekeli, A.-Servet;Orak, Adnan
    • 한국초지조사료학회지
    • /
    • 제18권2호
    • /
    • pp.163-170
    • /
    • 1998
  • This research was carried out to determine the sowing rate and row distance in Edirne province of Thrace Region in 1993 season. According to the results of some important characteristics of sorghum and their interactions were statistically significant. In Havsa and Uzunk'opr& the plant height were 70.36 and 95.28cm respectively, within each sowing rate were not significant. Number of tiller were not significant in distance and individual location Increasing the sowing rate kom I to 3 kg/da and the location Havsa and Umnkoprii resulted in significant stem diameter variation. Variation in 6-esh fodder yield has been found significant in row distance sowing rate and location 1 kglda seed rate with 30 cm row distance together are recommended to the farmer community to obtain the optimum profit.

  • PDF

실내공간에서 화재 발생위치에 따른 연기거동에 대한 실험연구 (An Experimental Study of Smoke Movement of the Various Fire Location in Room)

  • 유홍선;정진용;이재하;홍기배
    • 대한기계학회논문집B
    • /
    • 제26권5호
    • /
    • pp.703-709
    • /
    • 2002
  • In order to investigate the smoke movement in three dimensional room fires, the center fire, wall fire and corner fire plume in different sized fires were studied experimentally by rectangular pool fire using methanol as a fuel. As the fire size became larger for the center fires placed at the center of the floor, the air flow rate entrained through the opening, average hot layer temperature, flame angle deflected backwards and mean flame height was observed to increase. On the other hand, as the fire size became smaller, the neutral plane height in the door and time reached steady-state was observed to decrease. The average hot layer temperature, mean flame height and doorway neutral plane height obtained from comer fire were higher than those produced by wall fires and center fires. The simple model for describing the effect of walls on the mean flame height was presented. It was shown that the model provides a good description of the present measurements, when used with the assumption by Hansell(1993), that the increase of the average flame height is equal to the ratio of the open to the total perimeters of the trays. Also the two models for predicting the effects of walls on the mean flame height were presented. These models overestimated the measured values of the mean flame height above fuel trays close to a wall and in a corner by approximately 19-26%, respectively.

Sea state description of Asabo offshore in Nigeria

  • Jasper, Agbakwuru A.;Bernard, Akaawase T.;Gudmestad, Ove T.
    • Ocean Systems Engineering
    • /
    • 제10권1호
    • /
    • pp.25-47
    • /
    • 2020
  • A study of the wave conditions for the Asabo offshore location at the Qua Iboe oil field in Eastern Nigeria has been carried out. Statistical analysis was applied to three (3) years of data comprising spectral periods, Tp and significant wave heights, Hs. The data was divided into two (2); data from October to April represents one set of data and data from May to September represents another set of data. The results were compared with similar studies at other locations offshore of West Africa. It was found that there is an absence of direct swellwaves from the Southern Ocean reaching the location under study (the Asabo site). This work suggests that the wave system is largely emanating from the North Atlantic storms. The presence of numerous islands near the Asabo location shields the site from effects of storms from south west and therefore swells from the Southern Ocean. It is noted that the local wind has little or no contribution. An Hs maximum of 2 m is noted at the Asabo offshore location. It is found that the Weibull distribution best describes the wave distribution at Asabo. Thus, the Weibull distribution is suggested to be adequate for long term prediction of extreme waves needed for offshore design and operations at this location.

스크류 드라이버를 사용하는 작업장의 인간공학적 평가:심리육체적 접근방법 (Ergonomic evaluation of screw driver-using workstations: Psychophysical approach)

  • 박희석
    • 대한인간공학회지
    • /
    • 제15권2호
    • /
    • pp.51-62
    • /
    • 1996
  • This research utilized the psychophysical methodology, where secrw drivers are used, to determine the effects of i) the location and orientation of work objects, and ii) wearing gloves, on ratings of perceived exertion at various body parts. The validity of the psychophysical methodology in determining a preferred work pace was also studied. The subjects drove screws with a screw driver into thick wooden sheet at three vertical and three horizontal locations. They drove serews for 3 minutes at each location and assessed the condition using the psychophysical scale. The results showed that only the vertical location was a significant factor in determining the discomfort ratings. Driving screws at elbow height on the vertical surface and with the lower arm close to the body on the horizontal surface were the work locations with the smallest ratings of perceived discomfort. Wearing gloves had significant effects on reducing the pain of the hand. From the experiment in which a comfortable work pace was identified using 20 minute psychophysical adjustment, it was found that the psychophysical method is sensitive to workers perception of the physical stress when the upper limbs are employed. This was confirmend by the high correlation between the psychophysical results and EMG measurement.

  • PDF

인체 중심과 분절 중심에 대한 연구 (Study of the Center of Gravity in the Human Body and each Segment)

  • 정형국;배성수
    • The Journal of Korean Physical Therapy
    • /
    • 제5권1호
    • /
    • pp.61-69
    • /
    • 1993
  • It was performed to encourage for Physical Therapist to apply the theory of center of the human body and segments in clinical situations. This study was investigated literarily on center of the human body and segments. Methods which search for the center-2 types, that is, method using reaction broad and segmental method-was suggested. The center location difference of gravity in human body depends on individual character. Generally, the center location is in kent of 2nd sacrum, that is, at $55\%$ of height from foot. The center of each segment is on 'link'. In the first place we must how the weight of segment we can search for the center easily. Mean segment coater location of extremities is at $42.33\%$ from each proximal end, and mean center of head and trunk lies at $45\%$.

  • PDF