• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.135-142
• /
• 2008

The primary innovation in the new footwear is a heel lift of $20^{\circ}$ which is proposed to improve posture and balance as well as increase shock absorption. The purpose of this research was to compare the movement, forces and muscle activity between the new shoes and standard athletic footwear during standing and walking. Nine healthy subjects participated in this study. Data were collected at two times: 1) when the subjects first wore the new walking shoes and 2) after the subjects wore the shoes for 6 hours a day for two weeks. 1. During standing. the movement of the center of pressure is increased approximately 60% when wearing the new walking shoes compared to a control shoe. 2. During walking. the ankle is approximately $14^{\circ}$ more dorsiflexed during landing due to the 200heel lift in the new walking shoes. The knee compensates slightly by flexing approximately $2^{\circ}$ more. 3. As a result of the changes in the walking movement, the ground reaction forces are applied more quickly, although the peak magnitudes do rut change. 4. The resultant joint moments at the ankle and knee joints decrease from 21-60% with the largest reductions occurring during landing. In conclusion, the new footwear change the movement, showing a more upright stance. Also, the new footwear reduce joint loading at the joint during the landing and weight acceptance phase of walking. However, the influence of the new footwear is immediate and does rut change after wearing the shoes for two weeks.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.47-63
• /
• 2014

In this study theories of earth pressure such as Rankine, Coulomb, Trial Wedge, Improved Trial Wedge, used in the design for onshore and offshore structures, are analyzed and the characteristics of loaded pressure to virtual back (wall, plane) and wall surface in accordance with the structure type are suggested. To investigate characteristics of earth pressure, gravity retaining wall with inclined angle and cantilever wall with inclined ground are movilized for onshore structures and caisson and block type quay wall are mobilized for offshore structures. Based on various theories, the earth pressure applied angle(wall friction angle) and sliding angle toward the wall, which is influenced by the heel length, are calculated and compared. In the case of long heel, the pressure by Rankine's method in virtual plane and the mobilized angle are most reasonably estimated by the ground slope, and in the case of short heel, the pressure by Coulomb's method and the mobilized angle by the angle of wall friction. In addition, the sliding angle toward the wall estimated by the improved trial wedge method is large than the value of Rankine's method. Finally, in this study the reasonable method for calculating the pressure and the mobilized angle that can be applied to the routine design of port structures is proposed. The proposed method can decide the earth pressure with length of a heel and a self weight of retaining wall according to sliding angle toward the wall.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.194-203
• /
• 2011

This study investigated the effectiveness of visual biofeedback simulation training for patients with incomplete spinal cord injuries. Fifteen people with an ASIA impairment scale of C and D, according to the intervention method, were studied. They were randomly divided into two groups, seven people in the experimental group and eight people in the control group. They were studied three times a week for six weeks using a Tetrax Interactive Balance System, for a total of eighteen times, and each test took fifteen minutes. Paired t-tests were used to evaluate the changes before and after intervention. The difference between the groups was compared using an independent t-test. The experimental group showed significantly increased general stability, fall risk index, weight distribution (A, C, D, LEFT, HEEL) and weight distribution index, except for synchronization AC, BD. However, the control group only showed significantly increased weight distribution (A, C, LEFT). In a variation, experimental and control groups showed significantly increased weight distribution (A, B, C, HEEL), general stability, fall risk index and synchronization AD. Consequently, it was found that visual biofeedback simulation training was effective for the balance ability of incomplete spinal cord injury patients, and further studies are required.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.297-306
• /
• 2017

The study was performed to determine the impact of the gastrocnemius taping with balance training on spasticity and balance ability of the ankle joint. A total of 25 stroke subjects were divided into two groups: a taping with balance training (n=14), a sham taping with balance training (n=11). Spasticity assesment was scored by modified ashworth scale. Balance ability assesment was performed by functional reach test (FRT), the timed up & go test (TUG). The stability index (SI), the left-right weight distribution (left-right WD), the toe-heel weight distribution (toe-heel WD) were analyzed in the eyes open conditions(EO) and eyes closed conditions(EC) conditions using by the Tetrax interactive balance system. The experimental group showed a significant improvement in SI, left-right WD and toe-heel WD in the EO and EC, MAS, FRT, TUG. In comparison between the groups, a significant improvement was detected in FRT, TUG, SI and left-right WD in the EO, and left-right WD and toe-heel WD in the EC. It was found out that a short period of balance training with taping is effective on spasticity and balance ability in stroke patients. Therefore, any stroke patient without skin damage is encouraged to use the gastrocnemius taping for balance rehabilitation.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.59-66
• /
• 2018

The utilized coefficient of friction (UCOF) as a ratio of the shear force to the normal force on the ground during walking is used to identify the point at which slip is likely to occur. Shoe walking will change the utilized coefficient of friction by shoe design such as sole thickness and hardness, heel shape, and outsole pattern. In this study, subjects are 21 adults (10 female, 11 male, age: $25.2{\pm}2.3yrs$, height: $165.6{\pm}7.2cm$), analysis variables were walking speed, GRF, when the UCOF is maximal, and Tangent of CoP-CoM angle, and correlation analysis with the utilized friction coefficient (UCOF). As a result, First, for the shod walking the time point which UCOF is maximum about heel strike was faster and the magnitude was larger than for barefoot walking. Second, the correlation between the tangent of CoP-CoM and UCOF of right foot was higher at the left heel striking point (UCOF2_h) which occurred in the post propulsion phase than at the right heel striking point (UCOF1_h). This suggests that the right foot UCOF is related to the braking phase of left foot( which is the propulsion phase of right foot) rather than the braking phase of right foot.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.435-442
• /
• 2022

The heel effect creates a density difference in the X-ray images because the intensity of the anode and cathode side of the X-ray tube is not equal. The purpose of this study is to evaluate the density difference due to the heel effect by rotating the step wedge by 180 degrees and then changing the distance. After fixing the tube voltage and tube current to 72 kVp and 10 mAs, the forward and reverse directions were taken using a step wedge. At this time, the distance (80 cm ~ 130 cm) was taken at 10 cm intervals, and the density value was measured by setting the region of interest for each step of the step wedge through the M6 program. First, the difference in intensity between the anode and the cathode was confirmed through the radiation exposure test. In addition, when the distance (from 80 cm to 130 cm) was changed, the difference in density between the cathode and the anode decreased as the projection distance increased. As a result, images of uniform density can be obtained as the projection distance increases.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.107-118
• /
• 2006

Recently, Korean's 3-D foot data have been extensively collected through 5th national anthropometric survey known as 'Size Korea'. In this study, Korean foot shape was investigated and subsequently classified, based on the existing standard for foot shaping. This study analyzed and categorized Korean foot shapes through the following methods. Although the data used in this study were limited to those of Korean adults, major factors affecting the foot shape were deduced and then categorically grouped by the multivariate statistical analysis. For those whose age ranged from 14 to 70, major factors affecting the foot shape for the male were related to foot breadth, ankle thickness, 1st toe shape, malleolus height, heel to top of the foot length, the ratio between toe-side and heel-side and 5th toe shape. For the female, the ball of foot height was added to the above factors. From the factors extracted, the Korean foot shape was categorized into three groups for the male and four groups for the female. They were the ladder type, the inverted triangle type and the square type. For the female, the triangular type was added to the three types. These findings will serve as useful information for the footwear production industry in Korea.

• Steel and Composite Structures
• /
• v.37 no.4
• /
• pp.391-404
• /
• 2020

Human-induced vibration could present a serious serviceability problem for large-span and/or lightweight floors using the high-strength material. This paper presents the results of heel-drop, jumping, and walking tests on a large-span composite steel rebar truss-reinforced concrete (CSBTRC) floor. The effects of human activities on the floor vibration behavior were investigated considering the parameters of peak acceleration, root-mean-square acceleration, maximum transient vibration value (MTVV), fundamental frequency, and damping ratio. The measured field test data were validated with the finite element and theoretical analysis results. A comprehensive comparison between the test results and current design codes was carried out. Based on the classical plate theory, a rational and simplified formula for determining the fundamental frequency for the CSBTRC floor is derived. Secondly, appropriate coefficients (β_rp) correlating the MTVV with peak acceleration are suggested for heel-drop, jumping, and walking excitations. Lastly, the linear oscillator model (LOM) is adopted to establish the governing equations for the human-structure interaction (HSI). The dynamic characteristics of the LOM (sprung mass, equivalent stiffness, and equivalent damping ratio) are determined by comparing the theoretical and experimental acceleration responses. The HSI effect will increase the acceleration response.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.90-98
• /
• 2016

When ships and offshore plants are flooded or the floating crane is equipped with a heavy object, these floating structures are excessively inclined. In this case, immersion, heel, and trim affecting the hydrostatic restoration performance are very large and are coupled each other. In this paper, in order to calculate a static equilibrium position of floating structures with excessive inclination, the nonlinear governing equations were constructed by sequential linearization. In the governing equation, the immersion, heel, and trim are fully coupled, and the equations are represented using a plane area, a primary moment, and a moment of inertia of the water plane area. Therefore, it is possible to calculate the additional factor related the water plane area for estimating stability. Position and orientation of the floating structure are obtained by iterative calculation. The calculated results are compared with the previous studies in the aspect to the performance and the accuracy.

• The Journal of Korean Physical Therapy
• /
• v.29 no.4
• /
• pp.153-157
• /
• 2017

Purpose: The purpose of this study was to investigate the effect of self-postural control on foot pressure in subjects with forward head posture. Methods: Forty-two healthy adults were recruited in this study. Participants were divided into two groups: The forward-head postural (FHP) group (craniovertebral angle<$53^{\circ}$, n=22) and the control group (craniovertebral angle${\geq}53^{\circ}$, n=20). In the FHP group, foot pressure was measured using three different standing postures: Comfortable standing posture (CSP), subjective neutral standing posture (SNSP), and neutral standing posture with visual feedback (NSP-VP). Each position was performed in random order. In the control group, foot pressure was measured only using the comfortable standing posture. Results: With respect to CSP and SNSP, there was a significant difference on heel pressure between the two groups (p<0.05). Regarding NSP-VP, however, there was no significant differences on heel pressure between the two groups (p>0.05). Conclusion: We suggest that cervical posture control using visual feedback has a positive effect on the distribution of foot pressure in subjects with forward head posture.