• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.29-32
• /
• 2013

An aircraft made an emergency landing through the loss of capability controlling steering. A torsion link which is a part of steering apparatus has been adrift from the steering system and the bolt connected to the steering link has fractured. At the same time, the FLIR(Forward Looking Infrared Radar) mounted in front of the steering link has been also damaged. In the early of this investigation, we considered the failure of the FLIR had occurred first, that FLIR hit the steering link and finally the bolt fractured. The fractured section of the bolt has shown a beach mark and a dimple mark as well. The outside of the bolt has shown a large deformation by a heavy load. As a result, we have found out what the cause of the heavy load and the fractures for bolt, link and FLIR have occurred in what order.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.80-83
• /
• 1996

This paper develops a method for reliably estimating an UEP(Unstable Equilibrium Point) which is located in the direction of SEP(Stable Equilibrium Point)'s moving as system load is getting heavy. As power systems are getting loaded heavily, the SEP which is an operable solution, and the UEP which is occurring voltage collapse, are moving toward each other linearly. The estimated UEP is used as a good initial guess for the real UEP. The proposed method is tested by 3 bus system and Stagg 5 bus system. It is demonstrated that the proposed method is very useful for assessing system voltage stability in the case of heavy loaded power system. The result solutions are often used in conjunction with energy methods and the stability margin.

• International Journal of Korean Welding Society
• /
• v.2 no.1
• /
• pp.33-39
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.1-11
• /
• 2016

PURPOSES : This study estimated the load effect of a single heavy truck to develop a live load model for the design and assessment of bridges located on an expressway with a limited truck entry weight. METHODS : The statistical estimation methods for the live load effect acting on a bridge by a heavy vehicle are reviewed, and applications using the actual measurement data for trucks traveling on an expressway are presented. The weight estimation of a single vehicle and its effect on a bridge are fundamental elements in the construction of a live load model. Two statistical estimation methods for the application of extrapolation in a probabilistic study and an additional estimation method that adopts the extreme value theory are reviewed. RESULTS : The proposed methods are applied to the traffic data measured on an expressway. All of the estimation methods yield similar results using the data measured when the weight limit has been relatively well observed because of the rigid enforcement of the weight regulation. On the other hand, when the estimations are made using overweight traffic data, the resulting values differ with the estimation method. CONCLUSIONS : The estimation methods based on the extreme distribution theory and the modified procedure presented in this paper can yield reasonable values for the maximum weight of a single truck, which can be applied in both the design and evaluation of a bridge on an expressway.

• Journal of Ship and Ocean Technology
• /
• v.11 no.3
• /
• pp.24-38
• /
• 2007

It is a very challenging work to design large Arctic LNG carrier, since LNG carrier requires high reliability for the structural safety and the environment of Arctic region is known to be very severe. Therefore, special attention should be paid for the verifying the structural safety of LNG career particularly with regard to LNG leakage. In this paper, the safety of the hull structure and cargo containment system of 208K MK $III^{TM}$ type LNG carriers with Arc4 is investigated based on the direct calculation of ice loads as well as wave loads. From the whole investigation, it is clear that the developed vessel - 208K MK $III^{TM}$ type LNG carrier with RMRS Ice class Arc4 - has enough strength and is safe to be operated in Arctic region.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.195-202
• /
• 1995

As the pipe houses were constructed by imitation and routine without a structural design by now, they were often destructed by a strong wind or a heavy snowfall. The purpose of this study was to provide the basic data for the safety structural design of the pipe houses in Kyungpook region to prevent meteorological disaster. It was shown that the change of frame interval according to the safety factor under the wind load was similar that under the snow load. But the safety frame interval under the snow load was approximately 0.5-0.6m greater than that under the wind load for equal safety factor. Therefore, it seemed that the maximum safety frame interval was to be decided by the snow load. The frame of the pipe houses in Seungju region was structurally stable under the design snow load in recurrence intervals of 8-15years, but was unstable in Kolyong region.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.303-305
• /
• 2005

In MMORPG, gamers can engage in a variety of activities with other players from all over the world. So, this kind of games has unprecedented heavy load. There are so many kind of method to balance the load of MMORPG. But. many of them are not adaptable to dynamic load variation. In this paper, we propose a dynamic map-partition method based on VML. By use of dynamic map-partition based on VML, we can easily adapt to dynamic load variation. And by changing VML. we can manage field servers within game system.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.150-151
• /
• 2012

The utility grid has a supply of electric energy which is larger than the usually required power consumption under peak load condition. So, power distribution is required to have a heavy capacity because of peak-load period. To solve the problem, this paper proposes a 10kW rapid charger system which has a function of load compensation at the peak-load condition. The proposed system supplies power demanded by peak-load through transferring energy in the battery of electric vehicle to the grid. V2G operation is verified through simulation performed by 10kW rapid-charger.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.275-278
• /
• 2002

In this study, to increase removal efficiency of traditional electrokinetic treatment and to reduce contaminant load of wastewater that discharged through cathode compartment, enhanced electrode compartments were investigated. Hydroxide precipitation near the cathode electrode that encounter during traditional electrokinetic treatment were prevented by enhanced electrokinetic remediation test with newly invented electrode compartment. And heavy metal concentration in wastewater showed 0 ppm thus, additive post-treatment cost were not needed.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.375-376
• /
• 2014

본 논문은 전동기의 V/F 운전시 발생하는 경부하 진동을 억제하는 방법을 제안한다. 제안한 방법은 기존의 무부하 전류를 사용하는 방법을 변형하여 V/F 운전시 전원 및 기계적 진동에 의해 발생하는 경부하 진동을 억제하여 운전 특성을 향상시킨다. 제안한 방법을 적용한 V/F 운전 특성을 실험을 통하여 검증하고 기존의 V/F 운전 대비 개선된 성능을 비교 분석한다.