• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05a
• /
• pp.163-170
• /
• 2003

In this study, paying much attention to notable features obtained from spatial distributions of strongly related indices (precipitable water, convergence of air, convective available potential energy) with precipitation, fatal problems in selecting strongly related indices with observed precipitation in a BAIU season were discussed. These results showed spatial distribution of a predicted index provided alternative and physically consistent interpretation for selecting dominant index for heavy rainfall even if the predicted index did not correlate with observed rainfall at a specific observational point as confirmed by the features of CONV (Convergence) or even if it correlated with observed rainfall as confirmed by those of PW (Precipitable Water). Therefore, dominant meteorological indices of heavy rainfall should be selected according to physically evidenced interpretation on features of spatial distributions of indices, and physically and statistically consistent relationship should be built up.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.101-112
• /
• 1995

In order to improve the recovery efficiency of heavy water vapour from the atmosphere inside a reactor building, and to recover and upgrade the heavy water which escape, special treatments, such as reducing the ingress of light water vapour, are studied in the design of the CANDU reactor systems. This is considered in controlled method of the humidity over drawing fresh air through a desiccant dehumidifier which dries the air by absorption. Comparing with the moisture loads between summer and winter operations, the moisture removal rates are calculated. Those are proportional to the difference between the controlled space and the surrounding environment Installation of a new dehumidifier will be able to reduce the moisture loads from the cooling systems, improving overall system efficiency and saving operating costs.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.275-283
• /
• 2012

MCM-41(Mobil's Composition of Matter-41) and expanded graphite(EG) were investigated as potential adsorbents for heavy metal ions including Pb(II), Cu(II) and Ni(II) in various aqueous chemistries. MCM-41 showed shorter equilibrium times and higher adsorption capacities for all three heavy metal ions compared to expanded graphite. The adsorption of three heavy metal ions was significantly affected by the solution pH due to the competition with $H_{3}O^{+}$ at lower pH and precipitation at neutral or higher pH. Adsorptions of heavy metal ions onto MCM-41 and expanded graphite were successfully described with the pseudo-second-order model. During the competitive adsorption of three heavy metal ions, the selectivity of Pb(II) was highest and almost same selectivity was observed with Cu(II) and Ni(II) when MCM-41 was used as an adsorbent, while the expanded graphite exhibited the highest selectivity to Pb(II), followed by Ni(II) and Cu(II).

• Journal of Soil and Groundwater Environment
• /
• v.19 no.6
• /
• pp.1-5
• /
• 2014

The following research was initiated in order to compare the relationship between the amount of gunfire shot and its resulting heavy metal pollution rate. The research was conducted at two firing ranges located inside a military unit stationed in the rear strategical area, where one full distance firing range is used by soldiers in active service, and the other is used by recruits and reserves. The heavy metal pollution rate was measured also on water sample collected from the target zone while raining. Based on values such as the real amount of gunshot fired, amount of heavy metal in the soil of the target zone, and the degree of heavy metal pollution for each firing range, the research showed that although pollution rate was higher when more gunshots were fired, there was no close correlation between the two. The water samples showed that this might result from the soils containing heavy metals eroded and transported by rain due to the target zone having no vegetation.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.92-98
• /
• 2018

Suitability of aluminium-based water treatment sludge (WTS), a waste product from water treatment facilities, was assessed for removal of heavy metals from an electroplating wastewater which had high concentrations of copper and chromium along with other heavy metals. Batch tests with simulated wastewater in single- and multi-metal solutions indicated the influence of initial pH and WTS dose on removal of six metals namely Cu(II), Co(II), Cr(VI), Hg(II), Pb(II) and Zn(II). In general, removal of cationic metals such as Pb(II), Cu(II) and Zn(II) increased with increase in pH while that of anionic Cr(VI) showed a reduction with increased pH values. Tests with multi-metal solution showed that the influence of competition was more pronounced at lower WTS dosages. Column test with diluted (100 times) real electroplating wastewater showed complete removal of copper up to 100 bed volumes while chromium removal ranged between 78-92%. Other metals which were present in lower concentrations were also effectively removed. Mass balance for copper and chromium showed that the WTS media had Cu(II) and Cr(VI) sorption capacities of about 1.7 and 3.5 mg/g of dried sludge, respectively. The study thus indicates that WTS has the potential to be used as a filtration/adsorption medium for removal of metals from metal-bearing wastewaters.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.7 no.2
• /
• pp.14-20
• /
• 2011

The end of design lifetime for Wolsong unit 1 will be reached on 20th November in 2012. So the license renewal documents for the continuous operation of Wolsong unit 1 is under reviewing now. Major components of primary system such as pressure tubes, feeder pipes including delayed neutron monitoring system tubing are being replaced and many components of secondary system are also being repaired. In this paper, the assessment on the wear degradation of delayed neutron monitoring system tubing(on the other hand, DN tube was called) was performed for the ageing management of the same component. The wear defects of this component was one of causes that resulted in heavy water leakage accidents. Therefore design specifications of Wolsong uint 1 and heavy water leakage accidents of pressurized heavy water reactors were reviewed and causes of wear defect for DN tubes were analyzed. Wear propagation equations based on the heavy water leakage history were made and the proper repairing time was possible to be expected if the continued operation was considered. Finally design change items of DN tubes that were conducted for the long term operation of Wolsong unit 1 are introduced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1722-1728
• /
• 2002

Most researches regarding emulsified fuel were in the areas of emulsifier, emulsified fuel manufacturing and emulsified fuel droplet combustion, but there were little papers published regarding emulsified fuel combustion and boiler efficiency in an industrial boiler. The main purpose of this study is to clarify whether improvements in the boiler efficiency and the reduction of pollutants such as CO, NOx, SOx and smoke exist or not when emulsified fuels are combusted in the commercial boiler. Main experimental parameters were water content in heavy oil , excess $O_2$, and boiler load. The fuels used in this experiment were 0.5 B-C, and 5 kinds of 0.5 B-C/water emulsified fuels. The combustion characteristics of heavy oil and its emulsions with water were investigated in an industrial boiler. The combustion stability was monitored and exhaust gases such as CO, NOx, SOx and smoke were measured with excess $O_2$ and combustion load. In case of emulsified fuel combustion, flame stability was poor and boiler efficiency was lowered by 1.6~5.7%, but emission levels of CO and smoke were improved.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.223-228
• /
• 2002

In addition to supplying the essential elements, Ca and S, phosphogypsum can have profound effect on both the physical and chemical properties of certain soils. However, no widespread use of by-product phosphogypsum will be made unless such uses pose no threat to the public health and soil contamination. In this study, the extractability of As, Cd, Cu, and Pb with water and DTPA solution from phosphogypsum samples of pH 3, 5, and 7 were investigated to estimate the availability of those metals. Contents of water extractable metals in ohosphogypsum were less than 5 mg/kg for all the heavy metals investigated. The extractability of metals in DTPA solution was not quite different but a little higher in comparison to the water extraction. And the extractability was decreased as the pH of phosphogypsum increased. In the phosphogypsum of pH 7, amounts of water extractable metals were nearly zero. There was no significant difference in the amount of extractable metals during the extraction period of 5 weeks. The length of extraction time did not affect heavy metal extractability. Therefore there may be small fractions of easily soluble or extractable forms of metals in the phosphogypsum and most of the metals would be present in very insoluble forms. These results suggest that the application of phosphogypsum at appropriate rates on agricultural lands appears of no concern in terms of hazardous element contamination in soil.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.203-210
• /
• 2012

Nuclear power provides 30% of our country's power, which acts as one of the most important power sources. But on March 11, 2011, the earthquake that hit Northeast Japan with a 9.0 magnitude, known as the Fukushima Reactor Leak Incident has created fear in the public's mind that 'nuclear power is unstable'. The reason for such distrust are many but inaccurate reports of the incident by the media has added to the fear. This paper will analyze the contents of the media report of the heavy water leakage in reactor 3 at the Wolsong Nuclear Power Plant on October 4, 1999 to discover the problematic areas and ascertain a more appropriate method of media coverage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.95-104
• /
• 2011

As sea state harsher in the ocean space, more large motion and wave loads occurs on ships hull by non-linear phenomena. To consider nonlinear effect on ships hull in the structural design verification, the direct calculation method with numerical approach is used rather than rule values for the reliable accuracy. In this paper, the non-linear wave loads analysis in time domain is performed by using a Rankine Panel Method together with numerical schemes. Linear calculations have been carried out based on DNV CSA-2 notation to generate the motion responses and wave loads of large ships. By short and long term analysis, the design wave amplitudes are selected for the nonlinear analysis. The maximum wave induced bending moment in hogging and sagging conditions are calculated in the nonlinear analysis. Also, the green water effect on the wave induced vertical bending moment was investigated. The results show the vertical bending moments are more influenced by green water in sagging condition than in hogging condition due to green water loading.