• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.443-449
• /
• 1999

The investigation of the amount of the ecosystem damage on the shoreline due to the NAHODKA oil-spill accident, which occurred in the Sea of Japan, was attempted by using geoinformatics. At first, it was assumed that symbolical vegetation's distribution could be specified in the coast in Ishikawa Pref. where the heavy oil was washed, and surveyed the regional distribution. Then, the presumption result of those environmental capacities was arranged by GIS. In addition, the amount of the ecosystem damage was presumed as cost necessary though a symbolical living thing for the retreat because of the base line by the heavy oil drifting ashore was recovered. By comparing the vegetation line and the surveying data which shows environmental capacity, the retreat areas of the vegetation were 1100-1200 $m^2$. When the amount of damage on the ecosystem of the NAHODKA oil-spill accident was presumed based on the retreat area of this vegetation and the restoration cost, the amount of damage within Shioya beach which 150m in the surveying range became 2 to 2.5 million Yen. Because the extension distance from the Shioya beach to the Katano beach was about 3,500m, the amount of damage became about 46 to 65 million Yen. As a result of calculation for the amount of damage on the ecosystem of the NAHODKA oil-spill accident, it was estimated approximately 1,400 to 2,000 million Yen in the shoreline of Ishikawa Pref., because the total extension of beaches in Ishikawa Pref. is about 110km.

• ALGAE
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2007

In order to understand the impact of the heavy-oil pollution by the 1997 Nakhodka oil spill on the intertidal macroalgal vegetation, we have been monitoring succession in the intertidal flora since 1997 at Oh-ura, Takno, and Imago-Ura Cove, Kasumi in Hyogo Prefecture, northwestern coast of Honshu, Japan. We employed two different monitoring methods: 1) The percent cover of macro-algae (seaweeds) in 1 x 1 m quadrats along 450 m intertidal transects parallel to the shoreline were assessed and recorded by photographic imaging until 2002, and for 30-40 m transects of the most heavily polluted areas in 2004 and 2006; 2) The percent cover of macro-algae in 0.5 x 0.5 m quadrats along a transect line perpendicular to the shore were recorded and all macrophytes within the quadrat were completely removed to record the wet weight of each taxon (1997-2006). Based on the monitoring data, we conclude that the high intertidal zone at Imago-ura, where a large part of the stranded oil accumulated, suffered the heaviest damage and experienced the slowest recovery. In addition, although the original status of macroalgal vegetation before the impact was not well-documented, it appeared that recovery from the damage caused by the oil pollution required four to five years.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.160-165
• /
• 2016

AISI 4140 steel is widely used in various mechanical components owing to its superior mechanical properties. Surface hardening techniques are often used to further improve the properties, particularly for applications with moving components. The aim of this research is to understand the effect of heat treatment process on surface properties and tribological characteristics of AISI 4140 steel. In this work, we prepare two different AISI 4140 steel specimens- one cooled by air and one by oil- and determine surface properties such as surface topography and roughness using a confocal microscope. We also observe the cross-sections of the specimens using a scanning electron microscope to understand the difference in the material structure. In addition, we assess the hardness with respect to the distance from the surface using a micro-Vickers hardness tester. After characterizing the surfaces of the specimens, we investigate the wear characteristics of the specimens under hydrodynamic lubrication. The results show the presence of grooves on the surface of the oil-cooled specimens. It is likely that such grooves are formed during the cooling process using the oil. However, we observe no other significant differences in the surface properties of the specimens. The wear test results show the occurrence of severe wear on the oil-cooled specimens, which may be due to the groove formed on the surface. The results of this work may be helpful to improve surface properties using surface hardening techniques from a tribological perspective.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.48-56
• /
• 2014

Engine oil is an oil used for lubrication of various internal combustion engines. The main function is to reduce wear on moving parts; it also cleans, inhibits corrosion, improves sealing, and cools the engine by carrying heat away from moving parts. In engines, there are parts which move against each other. Otherwise, the friction wastes the useful power by converting the kinetic energy to heat. Those parts were worn away, which could lead to lower efficiency and degradation of the engine. It increases fuel consumption, decreases power output, and can induce the engine failure. This study was conducted to evaluate the relation between engine oil property changes and engine performance for the diesel engine. This test was performed by using 12L, 6 cylinder, heavy duty engines. Low SAPS 10W30 engine oil (two type engine oils) was used. Test procedure and method was in accordance with the modified CEC L-57-T97 (OM441LA) method. In this study, TAN, TBN, KV and metal components, engine power, blowby gas, A_F were presented to evaluate the relation with engine oil property changes and engine performance. TAN, TBN, KV and metal We found that the components were generally increased but engine performance did not change. This results mean that property changes did not affect on engine performance because those were not enough to affect engine performance.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.237-245
• /
• 2021

Particulate matter and ultra-particle matters generally refer to very small floating dust, such as 1/6 to 1/7 and 1/20 to 1/30, respectively, compared to the thickness of human hair, and contain various types of heavy metal ions. In addition to breathing, particle matters (PM) that flows in through the gaps in the pores of the skin can induce health problems in the body's tissues and skin, so it must be removed by blocking the inflow or by washing. Through this study, we confirmed the possibility that heavy metal ions can be adsorbed and removed by using Oryza sativa (Rice) bran oil (OSBO). In addition, the cell viability is much higher than that of grain-derived components through cytotoxicity experiments, and the cytoprotective effect of an external stimulus source can be expected. It was confirmed that the expression amount of COL1A1 mRNA increased, and accordingly, it was believed that wrinkles that might be caused by moisture lost by heavy metal ions in fine dust could be alleviated. Based on the results of these experiments, we tried to present a cosmetics containing OSBO, which is a wash-off formulation, in order to finally remove heavy metals.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.152-157
• /
• 2003

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper show that there is a sharp change in viscosity drop and moderate additive depletion when viscosity index of hydraulic oil is very high. For the extension of hydraulic fluid life, it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Performance of newly developed hydraulic oil based on used oil analysis is compared with previously used one. The properties of new formulation are the viscosity index of 140 and improved thermal stability consists of VHVI base oil. Field test results showed the possibility of extension of fluid life. Additionally, for development of high performance product, new required properties and performances were discussed.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_2
• /
• pp.875-883
• /
• 2023

In this letter, we used PlanetScope imagery to conduct experiments on the color characteristics for oil type classification of marine oil spills through Red-Green-Blue (RGB) histogram analysis. The histograms of marine oil spills can be divided into three categories (dark black tones, light silver tones, and light rainbow tones) according to the distribution of pixel values in each band. Thick oil layers with dark black tones can be classified as heavy oil, while thin oil layers with light silver and rainbow tones can be classified as light oil. As more images are analyzed in the future, these oil spill detection and classification methods will become more generalized and reliable.

• Corrosion Science and Technology
• /
• v.6 no.4
• /
• pp.211-218
• /
• 2007

In this paper, evaluation and development of corrosion resistant materials for smokestacks is summarized mainly on the basis of the author's experimental results. Operating environments of smokestacks and the problems of conventional lining materials for smokestacks are described briefly. The emphasis is focused upon the evaluation and development of recently developed corrosion resistant steels such as YUS260 for heavy oil fired smokestacks, WELACC5 for LNG fired smokestacks and NSL310MoCu Clad steel for coal fired smokestacks. Corrosion resistance of these steels under laboratory corrosion testing environments and actual environments are evaluated. Finally future problems of corrosion resistant materials for smokestacks are touched on briefly.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.244-249
• /
• 2004

Experiments were performed to investigate the characteristics of combustion of 7MW-3 air stages combustion system for a heavy oil firing boiler. Several fuel nozzles were developed for the purpose of lowering pollutions in another institute and ${\Phi}$-jet nozzle among them was equipped to the combustion system. A variety of combustion phenomena were observed as air stage ratio, air fuel ratio and load are changed for each nozzle. Main combustion characteristics are shape of flame, NOx and CO generations, smoke scale number. Through lots of adjustments, the combustion system reaches such goals as the low NOx of 160 ppm, CO of 300 ppm corrected at $O_2$ of 4% and dust of 150 mg/Sm3.

• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.26-34
• /
• 2000

Geometry change of burner nozzle has influence on fuel atomizing and combustion characteristics. NOx reduction technologies can be divided into two method; Before combustion method(NOx treatment of fuel) and After combustion method(NOx treatment of flue gas). In this study, experiments are carried out using difference nozzle and combustion condition change to reduce NOx in heavy oil fired thermal utility boiler. These methods have advantage like easy application and low installation cost. By this method NOx can be reduced by 18% and maintain CO emission level.