• 제목/요약/키워드: Heavy metal analysis

검색결과 820건 처리시간 0.022초

실리카흄을 이용한 중금속함유 유기성 슬러지 시멘트 고화체의 용출특성과 고정화기작에 관한 연구 (Fixation Mechanism and Leachability of Heavy Metal for Sludge Solidified by Silica Fume and Cement)

  • 전관수;황병기
    • 공업화학
    • /
    • 제16권2호
    • /
    • pp.180-186
    • /
    • 2005
  • 본 논문은 유기물과 중금속이 함께 포함되어 있는 폐수 슬러지의 시멘트 고형화를 위해 포졸란물질인 실리카흄을 고화보조재로 사용한 연구결과이다. 실리카흄을 고화보조재로 사용할 경우 고화체의 일축압축강도는 현저히 증가하는 결과를 보여주었으며, 실리카흄의 시멘트 대체가 전체 배합물의 15%까지 증가하였을 때 일축압축강도는 실리카흄을 전혀 사용하지 않았을 경우에 비하여 66.7%까지 증가하는 결과를 보여주었다. 또한 시멘트가 실리카흄으로 대체되는 양이 증가하면서 총 유기탄소와 중금속인 크롬의 용출량은 감소하는 결과를 보여주었으며, 배합물 중 실리카흄이 5%를 차지할 때 중성의 용출액에서 총 유기탄소의 85%가 용출억제되었으며, 산성의 용출액에서 0.76 mg-Cr/g-Cr의 크롬만이 용출되었다. 전자주사현미경과 X-선 회절분석, 적외선 분광분석 등을 이용한 미세구조분석 결과 실리카흄은 시멘트경화 초기에 크링커 입자를 피복하여 초결(initial setting)과 수화를 저해하는 에트링가이트(ettringite)의 형성을 감소시키는 것으로 나타났다. 본 연구결과 중금속과 유기물이 혼합된 슬러지의 시멘트 고형화에 있어서 실리카흄의 첨가는 유기물질이 시멘트 수화반응에 미치는 악영향을 억제하고 중금속 및 유기물의 용출을 감소시키는 것으로 나타났다.

공동주택 지하저수조 내 침전된 부유성 고형물의 발생원인 및 제어방안 (Investigating the Causes and Control Measures for Precipitated Suspended Solids in the Underground Reservoir Tank in an Apartment)

  • 장준영;김주원;김기팔;신현상;임병란
    • 한국물환경학회지
    • /
    • 제39권2호
    • /
    • pp.153-161
    • /
    • 2023
  • The reservoir tank in an apartment is crucial for maintaining the quality of drinking water after it has undergone treatment. Investigating the water quality and potential contaminants in the reservoir tank is essential to ensure the safety of the drinking water. This study examined the water quality and precipitated suspended solids that accumulate at the bottom of the reservoir tanks in four apartments located in Gyeonggi province. As a result of the water quality investigation, turbidity increased proportionally to the distance from the water treatment plant (WTP) to the household. Heavy metals were also detected in the reservoir tank inlet but not in the water supplied from the WTP. The precipitated suspended solids (SS) in the reservoir tank contain high levels of heavy metals and total organic carbon (TOC). The precipitated SS mainly consists of Al, Mn, and Fe, which are expected to be a combination with turbidity-inducing substances. The X-ray diffraction (XRD) analysis revealed the presence of γ-FeO(OH), MnO2, and β-Fe2O3 in the SS. Additionally, F-EEM analysis indicates that the dissolved organic matter in the SS is mainly derived from a natural water source and microorganism activities, including metal-oxidizing bacteria and biofilms that can absorb metal ions. Based on these findings, several countermeasures can be taken to prevent the inflow of SS into the household, including regularly cleaning the reservoir tank, replacing or cleaning old pipes in the water supply system, and implementing monitoring and filtering systems to manage the SS.

Detection of Heavy Metal Contents in Sesame Oil Samples Grown in Korea Using Microwave-Assisted Acid Digestion

  • Park, Min-Kyoung;Yoo, Ji-Hyock;Lee, Je-Bong;Im, Geon-Jae;Kim, Doo-Ho;Kim, Won-Il
    • 한국식품위생안전성학회지
    • /
    • 제28권1호
    • /
    • pp.45-49
    • /
    • 2013
  • 본 연구에서는 유화제를 사용하지 않고 초단파 산분해법을 이용해 우리나라에서생산된 참기름의 중금속을 측정하고자 하였다. ICP-MS를 통해 12개의 참기름 시료에 오염된 카드뮴, 납, 비소의 3종 중금속을 분석하였다. 분석법의 검증 결과 카드뮴, 납, 비소 모두 직선성($r^2$)이 0.99 이상이며 RSD는 4% 이하였다. 또한, 분석법의 정확성 및 효율성 측정을 위해 중금속 $10{\mu}g/g$$100{\mu}g/g$을 첨가한 시료를 분석한 결과, 회수율이 카드뮴 98.5-101.6%, 납 100.3-101.3%, 비소 102.1-111.2%로 우수하게 나타났다. 본 분석법을 이용하여 분석한 참기름 시료의 중금속 함량은 카드뮴 불검출${\sim}0.109{\mu}g/g$, 납 $0.014{\sim}0.200{\mu}g/g$, 비소 $0.014{\sim}0.125{\mu}g/g$이었다. 따라서, 중금속 오염지역에서 생산된 참깨 및 이를 이용한 가공품의 경우 섭취에 주의할 필요가 있다.

NoMix toilet 에서 발생하는 부산물을 이용한 수용액내 (준)중금속 제거 특성 및 가능성 연구 (A Study of the Removal Characteristics of Heavy Metal(loid)s using by Product from NoMix Toilet and its Characterization)

  • 심재홍;임정묵;김진원;김해원;오병택
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제21권1호
    • /
    • pp.28-39
    • /
    • 2016
  • Struvite (MgNH4PO4 ⋅ 6H2O) and hydroxyapatite (HAP, Ca10(PO4)6(OH)2) precipitation in urine-separating toilets (NoMix toilets) causes severe maintenance problems and also reduce the phosphate and calcium content. Application of urine separating technique and extraction of by-products from human urine is a cost effective technique in waste water treatment. In this study, we extract urine calcite from human urine by batch scale method, using urease producing microbes to trigger the precipitation and calcite formation process. Extracted urine calcite (calcining at 800℃) is a potential adsorbent for removal of heavy metal(loid)s like (Cd2+, Cu2+, Ni2+, Pb2+, Zn2+ and As3+) along with additional leaching analysis of total nitrogen (T-N), phosphate (T-P) and chemical oxygen demand (COD). The transformations of calcite during synthesis were confirm by characterization using XRD, SEM-EDAX and FT-IR techniques. In additional, the phosphate leaching potential and adsorbate (nitrate) efficiency in aqueous solution was investigated using the calcinedurine calcite. The results indicate that the calcite was effectively remove heavy metal(loid)s lead up to 96.8%. In addition, the adsorption capacity (qe) of calcite was calculated and it was found to be 203.64 Pb, 110.96 Cd, 96.02 Zn, 104.2 As, 149.54 Cu and 162.68 Ni mg/g, respectively. Hence, we suggest that the calcite obtain from the human urine will be a suitable absorbent for heavy metal(loid)s removal from aqueous solution.

고온소각에 의한 PCBs 함유 폐기물처리에 관한 연구 (A Study on the PCBs-containing Waste Treatment by High Temperature Incineration)

  • 김성중;김동혁
    • 유기물자원화
    • /
    • 제17권1호
    • /
    • pp.88-95
    • /
    • 2009
  • 본 연구는 국내 유해폐기물 고온소각설비를 이용한 PCBs 함유 폐기물의 소각처리 가능성을 알아보기 위해 정상조업시와 PCBs 절연유 투입시의 배가스, 비산재, 바닥재에 대한 다이옥신, Total-PCBs, Co-PCBs 분석을 실시하였으며, 바닥재 및 비산재에 함유된 중금속 성분의 용출 특성을 파악하기 위하여 중금속 용출시험을 실시하였다. 그 결과 PCBs 함유폐기물의 배기가스 중의 Dioxin 농도는 $0.00699{\sim}0.00763ng-TEQ/Nm^3$으로 정상조업시 $0.0192ng-TEQ/Nm^3$보다 낮은 것으로 나타났으며 Co-PCBs $0.00043{\sim}0.00112ng-TEQ/Nm^3$, Total PCBs $3.06{\sim}3.87ng/m^3$으로 분석되었다. 바닥재의 경우에는 Dioxin 0.00225~0.00630ng-TEQ/g, Co-PCBs 0.00027~0.00082ng-TEQ/g, Total PCBs 0.9~2.6ng/g, 비산재의 경우 Dioxin 0.00164~0.00344ng-TEQ/g, Co-PCBs 0.00053~.00054ng- EQ/g, Total PCBs 0.64~0.84ng/g로 나타났다. 바닥재와 비산재의 중금속용출 시험결과 바닥재에서는 모두 용출되지 않았으나, 비산재의 경우 Pb성분이 31.01~237.7ppm으로 용출기준을 초과하는 것으로 나타났으며 대기오염물질의 농도는 모두 배출허용기준치 이하로 나타났다.

  • PDF

침전법과 흡착법을 이용한 중금속 처리 (Treatment of Heavy Metal Wastewater by Pricipitation and Adsorption)

  • 심순보;이요상
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 1992년도 수공학연구발표회논문집
    • /
    • pp.325-328
    • /
    • 1992
  • The purpose of this research is to develop the technique of heavy metal removal from wastewater. The research is divided into two parts, one part uses complex precipitation and the other uses adsorption. In the first part of the study, humic acid is used as the complex agent, humic acid is a polyelectrolyte with a high complexation affinity. Lead, copper, zinc and cadmium were studied for their complex precipitation efficiencies. In the batch studies, humic acid was effective in removing 100% of the lead and 48.2% of the copper respectively from wastewater without anytreatment. The efficiency of cadmium and zinc, however, was very low. In the second part of the study, wastewater is introduced at the top of a silicagel adsorption column and then bottom effluent concentration is analyzed. The results of the analysis are used to draw a breakthrough curve.

  • PDF

Use of Benthic Algae and Bryophytes for Monitoring Rivers

  • Whitton, Brian A.
    • Journal of Ecology and Environment
    • /
    • 제36권1호
    • /
    • pp.95-100
    • /
    • 2013
  • Many countries have adopted a single, well-described approach to the use of phototrophs for monitoring river water quality, which involves the use of indices related to diatom composition at a site. Increasingly these indices have focussed on assessing ambient phosphate concentration. However, there is a wide range of other methods which can provide additional information to make up for any weaknesses in the standard method. Some of these methods are reviewed briefly here. They can be useful, for instance, when considering temporal and spatial variability in phosphate concentration at a particular site and providing much more insight on heavy metal or pesticide pollution than revealed by routine water analysis.

Adsorption mechanism of copper ions on porous chitosan membranes: Equilibrium and XPS study

  • Ghaee, Azadeh;Zerafat, Mohammad Mahdi
    • Membrane and Water Treatment
    • /
    • 제7권6호
    • /
    • pp.555-571
    • /
    • 2016
  • Heavy metal contamination has attracted considerable attention during recent decades due to the potential risk brought about for human beings and the environment. Several adsorbent materials are utilized for the purification of contaminated water resources among which chitosan is considered as an appropriate alternative. Copper is a heavy metal contaminants found in several industrial wastewaters and its adsorption on porous and macroporous chitosan membranes is investigated in this study. Membranes are prepared by phase inversion and particulate leaching method and their morphology is characterized using SEM analysis. Batch adsorption experiments are performed and it is found that copper adsorption on macroporous chitosan membrane is higher than porous membrane. The iso-steric heat of adsorption was determined by analyzing the variations of temperature to investigate its effect on adsorption characteristics of macroporous chitosan membranes. Furthermore, desorption experiments were studied using NaCl and EDTA as eluants. The mechanism of copper adsorption was also investigated using XPS spectroscopy which confirms simultaneous occurrence of chelation and electrostatic adsorption mechanisms.

Biosorption Model for Binary Adsorption Sites

  • Jeon, Choong;Park, Jae-Yeon;Yoo, Young-Je
    • Journal of Microbiology and Biotechnology
    • /
    • 제11권5호
    • /
    • pp.781-787
    • /
    • 2001
  • The binding of heavy metals by a biosorbent with binary functional groups was mathematically modeled. An FT-IR spectrophotometer analysis was employed to determine the stoichiometry between the protons in the functional groups of alginic acid and lead ions as a model system. The results calculated using an equilibrium constant agreed well with the experimental results obtained under various operating conditions, such as pH and metal ion concentration. It was also shown that the overall adsorption phenomenon of alginic acid was mainly due to its carboxyl groups. The equilibrium constants for each functional group successfully predicted the lead adsorption of ${\alpha}$-cellulose. Furthermore, the biosorption model could predict the adsorption phenomena of two metal ions, lead ions and calcium ions, relatively.

  • PDF

소결온도에 따른 일라이트 기능성 변화 (Variation of Functional Characteristics of Illite with Heat Treatment)

  • 김호수;김한일;서판석;구경완;한상옥
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
    • /
    • pp.117-121
    • /
    • 2002
  • In this paper, the proper manufacturing method to the use of Illite with many application was studied. We confirmed merit of manufacturing and forming according as respective temperature. The variety of crystallization and surface was confirmed by X-ray diffraction(XRD) analysis and SEM. Then, we performed the experiments such as a antibiosis, a heavy metal adsorption and a gas deodorizaton to confirm the function of Illite. As a result, the adsorption of gas decreased according as the heat treatment of Illite, but the ability of antibiosis wasn't changed.

  • PDF