• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3289-3293
• /
• 2014

Femtosecond laser ablation (fs LA) was used in this study to identify pollution by heavy metals and the distribution of elemental nutrients at different rice milling ratios. Polished rice (degrees of milling of 3, 5, 7, 9, and 11) was collected from major Korean supermarkets and one sample thereof was selected. An internal quality control experiment was conducted using a rice flour certified reference material from the Korea Research Institute of Standards and Science (KRISS CRM) for the evaluation of the efficacy. To assess the effectiveness of the analysis method, the reliability was validated using a food analysis performance assessment scheme (FAPAS), with chili powder serving as an external quality control. The results of the analysis of the inorganic elements Ti, Ca, Al, Fe and Mn in white and brown rice with degrees of milling of 3, 5, 7, 9 and 11 using ICP-MS, ICP-OES and AAS revealed contents of 0.40, 49.2, 2.43, 5.36 and 10.3 mg/kg in white rice and 0.59, 78.0, 7.52, 11.0 and 18.5 mg/kg in brown rice, respectively. Among the elements, there were remarkable differences in the measured contents. By comparing the contents of the elements at different degrees of milling, Ti, Co, As, Ca, Al, Cu, Fe, and Mn were determined to be distributed on the surface of the rice grains, whereas the contents of Cd and Pb increased toward the center of the rice grains, and Si was evenly distributed. After the quantitative analysis of rice samples polished to different degrees of milling, Ca and Al, which were contained in large amounts, and Si were analyzed with specificity by fs LA. The results show that Ca and Al were distributed in the rice husk (protective covering of rice) and Si was distributed in all parts of the rice.

• Journal of Environmental Health Sciences
• /
• v.31 no.5 s.86
• /
• pp.349-359
• /
• 2005

In this study, we focused on the geographical and the meterological conditions, the atmospheric examination, the soil contents and compositions in order to establish cultural properties conservation plan in Gyeongju and its surroundings. Also, the transport route with environmental contaminants in Ulsan and Pohang was examined. The results could be summarized as follows ; Air pollutant and environmental contaminant was transported by two types of winds. One is induced by local winds, the other is induced by synoptic winds. Air contaminant transported from coastal regions to inland regions were associated with wind velocity. Gyeongju had good atmospheric conditions, i.e. $SO_2\;0.009{\sim}0.011ppm,\;CO\;0.6{\sim}0.8ppm,\;NO_2\;0.015{\sim}0.020ppm,\;O_3\;0.017{\sim}0.032ppm,\;PM_{10}\;46{\sim}62{\mu}g/m^3\;and\;Pb\;0.034{\sim}0.060{\mu}g/m^3$, which was below environmental air qualify standards and was little lower than those of Pohang and Ulsan. However, Ulsan and Pohang city are located on south-east coast and have many industrial facilities. Hence, air pollution problems become serious issues in Ulsan, Pohang, Busan, Daegu and other cities due to the emission of air pollutants from the various industrial facilities, incinerator and power plants, etc. The soil of Gyeongju had heavy metals conditions, i.e. $Cd\;0.01{\sim}0.08mg/kg,\;Cu\;N.D{\sim}2.39mg/kg,\;As\;N.D{\sim}0.07mg/kg,\;Hg\;N.D{\sim}0.15mg/kg,\;Pb\;0.49{\sim}1.39mg/kg,\;Cr^{+6}\;0.02{\sim}0.42mg/kg,\;Fe\;0.74{\sim}1.55mg/kg,\;Mn\;0.11{\sim}0.49mg/kg\;and\;Zn\;1.11{\sim}3.56mg/kg$. However, pH value of soil had range of $4.12{\sim}7.45$. The results showed that high pH concentration of soil could occur due to air pollution diffusion and environmental contaminant transport at Ulsan and Pohang city.

• Journal of fish pathology
• /
• v.30 no.2
• /
• pp.115-134
• /
• 2017

A total number of 668 apparently healthy fish were obtained from farm to study the effect of two heavy metals (Copper and Mercury) on histopathology of liver, kidney, spleen, gills and muscles also residues in muscles. The $LC_{50}$/96 hr. of Cu and Hg were estimated and fish exposed to 1/2 $LC_{50}$ for 7 days and for 1/10 $LC_{50}$ for 8 weeks from each product separately. Histopathological findings in acute and chronic mercuric chloride toxicity revealed degeneration and necrosis in the glomeruli, interstitium tissue and epithelium lining renal tubules. The tubular epithelium became necrotic at several places. Eosinophilic hyaline droplets is exist in the cytoplasm of the necrosed cells. Degenerative changes and hyperactivity in melanomachrophage center was seen in the spleen together with some necrotic areas. Necrosis and aggregation of melanomachrophage were seen in the hepatic cells, Hepatic cells showed vacuolar degeneration in the hepatic cells. Gills showed loss in the lamellae of the filaments associated with edema, inflammatory cells infiltration and haemorrhages in the arch. The sarcoplasm of the bundles of the skeletal muscle showed granular degeneration and focal inflammatory cells infiltration between the hyalinized bundles. Mercury residues obtained from these studies in the acute toxicity were 0.22 ppm/gm in the 2nd day, 0.411 ppm/gm in the $5^{th}$ day ended with 0.96 ppm/gm in the $7^{th}$ day. In chronic toxicity it was 1.1320, 1.7140, 2.3620 and 3.5640 ppm/gm respectively from the $2^{nd}$ to the $8^{th}$ week of exposure. In acute and chronic copper toxicity, there was degenerative changes in renal tubules. Melanophores aggregation in the wall of the blood vessels of the spleen and depletion of some of the melanophores in the melanomachrophage were seen together with necrosis in some areas. Congested Mvs (Micro vessels) and vacuolation of hepatocytes were observed. Some areas of hemorrhage and melanophores vacuolar degeneration in the liver were seen. There was mitosis in some areas with displesia of hepatopancreatic cells and eosinophilic granular cells aggregation. Zymogen granules disappeared and there were dyplastic hepatocytes. Congestion in the blood vessels of the gill filaments, associated with massive number of granular eosinophilic cells infiltration were seen in the base of the filaments. There were sever vacuolization and hyalinization in the skeletal muscle bundles. Detection of residues of copper sulfate revealed increase of the amount of copper measured in ppm/gm comparing to the normal control starting from 0.60 ppm/g in the $2^{nd}$ day, 0.67 ppm/g in the $5^{th}$ day and 0.67 ppm/g in the $7^{th}$ day. Result obtained in chronic copper sulfate toxicity revealed gradual increase of the amount of copper which ranged from 0.18 ppm/g at the $2^{nd}$ week to 0.21 ppm/g in the $8^{th}$ week of exposure.

• Journal of Environmental Health Sciences
• /
• v.37 no.4
• /
• pp.279-288
• /
• 2011

Objectives: This study investigated the levels and components of floor-settled dust in two elementary schools located at different sites (one near the Shihwa industrial complex and the other in a rural area) in order to evaluate the amounts of trace metal elements (As, Cd, Co, Cr, Cu, Ni, Pb and Zn) and microorganisms. Methods: Over twenty settled-dust samples were collected from the two elementary schools. Trace metal elements were extracted from the dust using hydrochloric acid and nitric acid, and the amounts were measured by ICP-OES. Microbiological analysis was performed by bacterial culturing using R2A medium and denaturing gradient gel electrophoresis (DGGE). Results: The results showed that the amounts of three metal elements (Cr, Pb, and Zn) were significantly different between the schools (${\alpha}$=0.05, p<0.04). In addition, microbial communities in each school were highly correlated with one another. Among the identified microorganisms, a number of potentially opportunistic microorganisms, including antibiotic-resistant bacteria such as Acinetobacter baumannii, were found. Conclusions: This study will provide preliminary data for assessing levels and types of chemical and microbiological agents in elementary schools and for further evaluating human health risks associated with the agents.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.945-950
• /
• 2007

The stormwater runoff from paved area are highly polluted because of particulate materials as well as metals from various vehicular activities. The Division of Road Maintenance in Ministry of Construction and Transportation was recently developed the Guidelines of Environment-kindly Road Maintenance. It is actually requiring the BMP construction to control the nonpoint source pollution as based on the TMDL program. This research is carried out in order to define the characteristics of stormwater runoff from the toll-gate of highways since 2006, which is actually one of the main pollutant sources of paved areas. This monitoring is the first phase work for establishing the treatment facilities in the toll-gates. The one of the main characteristics from toll-gate runoff is the first flush phenomenon containing lots of sediments and metal compounds at the beginning of a storm event. Usually it is used to determine the size of treatment facilities and to calculate the reduced pollutant mass in the facility. The research results shows that the mean EMC vaules for heavy metals are determined to $274.3{\mu}g/L$ for Cd, $1,273.4{\mu}g/L$ for Cr, $1,822.0{\mu}g/L$ for Cu, $6,504.9{\mu}g/L$ for Fe, $14,930.3{\mu}g/L$ for Pb, and $714.1{\mu}g/L$ for Zn. Also the metal mass loadings from the toll-gates are calculated using EMC, watershed area and storm duration.

• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.295-304
• /
• 2003

The Dukpyung and the Chubu areas were selected to investigate the migration and enrichment of arsenic and other toxic elements in soils and crop plants in areas covered with black shales. Rock and soil samples digested in 4-acid solution (HCI+HNO$_3$+HF+HC1O$_4$) were analyzed fer arsenic and other heavy metals by ICP-AES and ICP-MS, and plant samples by INAA. Mean concentration of As in Okchon black shale is higher than those of both world average values of shale and black shale. Especially high concentration of 23.2 mg/kg As is found in black shale from the Dukpyung area. Mean concentration of As is highly elevated in agricultural soils from the Duk-pyung (28.2 mg/kg) and the Chubu areas (32.6 mg/kg). Arsenic is highly elevated in rice stalks and leaves from the Dukpyung (1.14 mg/kg) and the Chubu areas (1.35 mg/kg). The biological absorption coefficient (BAC) of As in plant species decreases in the order of rice leaves>com leaves>red pepper>soybean leaves=sesame leaves>corn stalks>corn grains.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2018

The contents of total nitrogen, total phosphate, and total potash are important factors to determine the application rate of the organic fertilizers to arable lands. The concentrations of nutrient, organic matter, salt, water, heavy metal in mixed oil cakes and mixed organic fertilizers in circulation were investigated with 141 and 179, respectively. The mean levels of total nitrogen, total phosphate, and total potash in organic fertilizers of from 2015 to 2017 were 4.9%, 2.8%, 1.7%, respectively. The average contents of organic matter, salt, and water were 77.0%, 11.5%, and 0.3%, in mixed oil cakes, and 72.3%, 11.7%, 0.5% in mixed organic fertilizer, respectively. The maximum concentrations of Cr, Cu, Ni, and Zn were found to be in accordance with the official standard of commercial fertilizer. In order to promote balanced nutrient absorption of crops, it is necessary to increase the average content of total potash of the organic fertilizers to 3.2%.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.290-302
• /
• 2003

This study was carried out to evaluate geochemical properties for stream sediments, surrounding soils, sludge collected in the drainage pipe of leachate and waters (stream water, groundwater, leachate) around the Pungam Landfill in Gwangju city. The stream sediments don't show any systematic trend of contents from upstream to downstream. The most enriched major element in the stream sediments is Fe (up to 7.08wt.% in GJ-23). Though stream sediment GJ-23 and GJ-34 were enriched by some heavy metals (eg. As, Cu, Zn), they do not constitute serious problems for environment consideration. The concentration of Fe (35.lwt.%) and As (38ppm) are significantly high in the GJ-8, which is soil specimen adjacent to leachate reservoir. The sludge (GJ-7) shows very high concentrations of As, Mn, Cr, Pb. In particular, the Cr content is 45.6 ppm, which exceeds the permitted level. The leachate is characterized by high TDS (2210-2470mg/L) and high electric conductivity (468, 530ms/cm), and enriched in both cation (Na, K) and anion (HCO$_3$). The leachate(PK-3) had a relatively high concentration of Cl, and is plotted in Na-Cl type on the Piper's diagram. The NO$_3$-N of the groundwater and stream water exceeded the permitted levels for drinking water.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.517-525
• /
• 2009

The water quality of Lake Shihwa had been rapidly deteriorating since 1994 due to wastewater input from the watersheds, limited water circulation and the lack of a wastewater treatment policy. In 2000, the government decided to open the tidal embankment and make a comprehensive management plan to improve the water quality, especially inflowing stream water around Shihwa and Banwol industrial complex. However, the water quality and microbial community have not as yet been fully evaluated. The purpose of this study is to investigate the influent water quality around the industrial area based on chemical and biological analysis, and collected surface water sample from the Siheung Stream, up-stream to down-stream through the industrial complex, Samples were collected in July 2009. The results show that the downstream site near the industrial complex had higher concentrations of heavy metals (Cu, Mn, Fe, Mg, and Zn) and organic matter than upstream sites. A combination of DGGE (Denaturing Gradient Gel Electrophoresis) gels, lists of K-WQI (Korean Water Quality Index), cluster analysis, MDS (Multi-Dimensional Scaling) and PCA (Principal Component Analysis) has demonstrated clear clustering between Siheung stream 3 and 4 and with a high similarity and detected metal reducing bacteria (Shewanella spp.) and biodegrading bacteria (Acinetobacter spp.). These results suggest that use of both chemical and microbiological marker would be useful to fully evaluate the water quality.