• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.391-396
• /
• 2011

Recently it revealed that urban runoff was one of the major source that contaminates the river, lake and estuary because it contains toxic compounds such as heavy metals and Poly Aromatic Hydrocarbons (PAHs) as well as suspended solids, organic compounds and nutrients. The engineered polymetric media in this research were developed for reducing pollutants in urban runoff and would be used to be charged in the storm water treatment equipment. The engineered media that were composed of the polypropylene was foamed to have the buoyancy and then shattered by mechanical for the efficient filtration. In this study, Spherical Expanded Polypropylene Media (SEPM), Crushed Polypropylene Media (CPM), Large Crushed Expanded Polypropylene Media (LCEPM), Small Crushed Expanded Polypropylene Media (SCEPM) were made from polypropylene. Surface characteristics of the developed media were determined by scanning electron microscopy analyses. Also, removal efficiencies of SS, $COD_{Cr}$ in the artificial road runoff and the bed headloss by media and particle pollutants captured by media were examined. Results on the surface characteristics of media indicated that SCEPM had the largest specific surface area, $0.80m^2/g$, the lowest specific gravity, 0.091, and the biggest porosity, 0.63, because of crushing the media at the process of manufacturing. And the SCEPM's removal efficiencies of TSS and $COD_{Cr}$ in the artificial road runoff were 92.9% and 83.6%, respectively and the headloss of SCEPM was the least of them.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.3
• /
• pp.5-17
• /
• 2021

This study aims to investigate the causes and countermeasures for the occurrence of tension cracks in the slope of the rock mass of heavy equipment for road construction. Electric resistivity survey was performed to investigate the expandable tensile crack range. As a result of examining the distribution of soft zones in the rock mass, a low specific resistance zone was found at the bottom of the access road where tensile cracks occurred. It was confirmed that a low resistivity zone was distributed near the top of the excavation slope. Therefore, reinforcements was performed by determining the location of the possible tensile crack as the top of the excavation slope. Two rows of reinforced piles and anchors were proposed as a reinforcement method, and the slope stability analysis showed that the allowable safety factor was satisfied after reinforcements.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.39-46
• /
• 2021

In this paper, we propose a method for the motion recognition method required in the industrial field in mixed reality. In industrial sites, movements (grasping, lifting, and carrying) are required throughout the upper full-body, from trunk movements to arm movements. In this paper, we use a method composed of sensors and wearable devices that are not vision-based such as Kinect without using heavy motion capture equipment. We used two IMU sensors for the trunk and shoulder movement, and used Myo arm band for the arm movements. Real-time data coming from a total of 4 are fused to enable motion recognition for the entire upper body area. As an experimental method, a sensor was attached to the actual clothes, and objects were manipulated through synchronization. As a result, the method using the synchronization method has no errors in large and small operations. Finally, through the performance evaluation, the average result was 50 frames for single-handed operation on the HoloLens and 60 frames for both-handed operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.542-545
• /
• 2022

Recently, the Act on the Punishment of Severe Disasters has drawn attention to the construction environment. A common way to check the safety management of the construction site is for workers to check the site with their own eyes. However, this method is inevitably affected by the limitations of workers' abilities, resulting in fatigue and reduced work efficiency. For this reason, it cannot be an efficient method. Thus, we intend to help the working environment and construction site safety through this study, by proposing an efficient ICT safety management system that can supplement the above methods. In this paper explain the design of the access management system using RFID and the field information monitoring method through noise sensors and fine dust sensors. In addition, we propose a system that can prevent accidents between heavy equipment and people with a PIR sensor, and prevent safety accidents by grasping the slope of the building being worked through a gyro sensor.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.127-136
• /
• 2009

Voice of the customer(VOC) is a term used in business and information technology(IT) to describe the process of capturing a customer's requirements in enterprises or various organizations. Recently, in order to satisfy customer's needs, enterprises try to utilize VOC at recurrence prevention of problems and their improvement activities, planning and development of product/service by processing, storing, and analyzing VOC. Until now, VOC management systems are introduced around service industries such as hotel business and insurance/financial business, etc. This paper proposes an integrated management scheme of VOC which are captured by various communication channels and describes a case of implementing an integrated VOC management system on the basis of the proposed scheme for the large-scale manufacturing company. By the implemented system, VOC are stored and utilized as the important knowledge assets of enterprises.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.332-334
• /
• 2021

As fatal accidents due to industrial accidents and deaths due to civil accidents were pointed out as social problems, the Act on Punishment of Serious Accidents Occurred in the Workplace was enacted to ensure the safety of citizens and to prevent serious accidents in advance. Effort is required. In this paper, we propose a distance prediction model in relation to the case where an operator is hit by heavy equipment such as a forklift. For the data, actual forklift trucks and workers roaming environments were directly captured by CCTV, and it was conducted based on the Euclidean distance. It is thought that it will be possible to learn YOLO-v4 by directly building a data-set at the industrial site, and then implement a model that predicts the distance and determines whether it is a dangerous situation, which can be used as basic data for a comprehensive risk situation judgment model.

• Journal of Veterinary Clinics
• /
• v.40 no.6
• /
• pp.429-437
• /
• 2023

In veterinary medicine, most radiographic images are obtained by restraining patients, inevitably exposing the restrainer to secondary scattered radiation. Radiation exposure can result in stochastic reactions such as cancer and genetic effects, as well as deterministic reactions such as skin burns, cataracts, and bone marrow suppression. Radiation-shielding equipment, including aprons, thyroid shields, eyewear, and gloves, can reduce radiation exposure. However, the risk of radiation exposure to the upper arms, face, and back remains, and lead aprons and thyroid shields are heavy, restricting movement. We designed a new radiation-shielding system and compared its shielding ability with those of conventional radiation-shielding systems. We hypothesized that the new shielding system would have a wider radiation-shielding range and similar shielding ability. The radiation exposure dose differed significantly between the conventional and new shielding systems in the forehead, chin, and bilateral upper arm areas (p < 0.001). When both systems were used together, the radiation-shielding ability was better than when only one system was used at all anatomical locations (p < 0.01). This study suggests that the new radiation-shielding system is essential and convenient for veterinary radiation workers because it is a step closer to radiation safety in veterinary radiography.

• Journal of Radiation Industry
• /
• v.18 no.2
• /
• pp.117-126
• /
• 2024

This study aims to identify high exposure tasks among the tasks performed in domestic nuclear power plants as a basis for developing training programs to improve the efficiency of workers' work. To this end, we first analyzed the exposure status of radiation work in domestic nuclear power plants. Radiation tasks in nuclear power plants were categorized, collective doses were investigated, and the collective doses were calculated based on the collective doses, and representative high exposure tasks were identified. We found that the collective and individual doses in domestic nuclear power plants are continuously decreasing, but there is an imbalance of exposure among workers. In terms of work classification, nuclear power plants are managed in 236 work codes based on light water reactors and 181 work codes based on heavy water reactors, depending on the work equipment and location. Among the total work codes, 23 codes have an annual average dose exceeding 10 μSv, and based on this, 10 representative high exposure tasks were derived. The representative high exposure tasks were selected as S/G nozzle dam work, S/G debris removal work, nuclear instrumentation system, S/G eddy current detection work, and insulation work. The results of this study are expected to serve as an important basis for reducing the exposure of workers in nuclear power plants and improving work efficiency.

• Journal of the Korean Society of Safety
• /
• v.39 no.3
• /
• pp.1-6
• /
• 2024

Polyester round slings are widely utilized in various work environments due to their lightweight, flexible nature and smooth surface that minimizes the risk of cargo abrasion or damage. However, specific guidelines intended to protect round slings from the damage caused by the sharp edges of cargo, thus preventing accidents in case the cargo falls, are lacking in South Korea. In this study, a comparative analysis was conducted on the regulations and guidelines related to round slings in South Korea and the United States. Further, experiments were carried out to determine the relationship between round slings and lifting accessories. The research identified specific shortcomings in the user manuals provided by round-sling manufacturers. Accordingly, certain measures were proposed for enhancing the operational safety of round slings: 1) establish criteria for edge protection of polyester round slings and 2) recommend standardization of the information provided by manufacturers. As developing new standards is a time-consuming task, this study proposes a method for enhancing the operational safety of round slings in the short term by introducing established safety standards from the United States-where safety has been proven over a considerable period of time-into the domestic context. In addition, it is recommended that edge criteria be permanently printed on the labels of round slings.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.