• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.825-839
• /
• 2010

The global and domestic market for offshore wind farm is expected to grow fast, and the design and installation of substructure and foundation is getting more important. As for the offshore wind farms located in the shallow(depth < 20m) water, the construction and installation of the substructure and foundation makes up about 1/4 ~1/3 of the offshore wind farm construction cost, and the portion is expected to increase because the turbine capacity is increasing from 2 ~ 3MW to 5MW or larger and the water depth of wind farms is also increasing over 30m. As a foundation for offshore wind turbine, the suction caisson foundation is being considered to be a highly competitive alternative to the conventional monopile or gravity based structure, because it has features suitable for the offshore construction such as quick installation, no heavy equipment for penetration and no hammering noise for driving. In order to study the installation behaviour of the suction caisson, laboratory tests were performed with sand. The pore water pressure and displacement were measured to analyze the suction pressure during penetration, the penetration speed and the amount of heaving.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.317-323
• /
• 2011

본 논문에서는 원자력 발전소 폴라 크레인(polar crane)의 설계를 위해 유한요소법을 통한 내진해석을 수행하였다. 모드 해석(modal analysis)을 통하여 폴라 크레인의 고유진동수와 진동형상을 파악하고 응답스펙트럼(response spectrum)을 통해 폴라 크레인의 내진 안전성을 평가하였다. 그리고 액체저장탱크에 대한 내진해석을 유한요소법을 이용하여 수행하였는데, 탱크가 요동시에 액체가 탱크 외벽에 가하는 힘을 고려한 슬로싱해석과 안전정지지진 하중 조건에서의 해석을 수행하였다. 본 논문에서 유한요소해석 상용코드인 ANSYS를 이용하여 내진해석에 필요한 해석기법과 과정 등을 설계 시에 활용할 수 있도록 제안하였다.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.48-53
• /
• 2017

Many construction accidents can be lead to a death occurring at construction sites. These are considerably due to potentially-hazardous equipment and machine or unexpected collapsion at earth work due to land slide and so on. Almost 50% of the total death and injury, occurred in construction sites in 2015. 66% of those serious accidents are due to falling occurring from construction sites when they work. Therefore, causes and recommendations of each accident should be deeply thought and analysed The indirect causes are directly related to safe consciousness of the construction workers. Actually, their safety consciousness are not high, even very low, it is thought. Questionnaire survey sheets have been distributed to Seoul, Incheon, and Gyunggi-Do area, first. And then, the authors have collected those directly at sites, in order to increase collection rate of the sheets. The totally, collected sheets are 295 sheets. And, they are analysed using SPSS version 19 package program. Workers internal consciousness has been investigated and reviewed and analysed by statistical method such as frequency rate, crossed, and correlated analysis. And finally the conclusions for the above analyses are as follows; Heavy weight worth a crew of more than two workers should be necessarily considered for the advanced safety plan and needed for making a highly potential hazard group at construction sites. Safety consciousness, earing p.p.e, workman ship should be mainly considered for investing safety costs with an aspect of human factor.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1908-1914
• /
• 2012

풍력발전기의 용량이 점차 대형화되고 해상풍력단지는 수심이 깊은 곳에 조성됨에 따라 해상풍력발전구조물의 하부구조 및 기초시공비용 또한 급격히 증가될 것으로 예상된다. 석션버켓기초는 버켓형식의 기초를 자중에 의한 관입과 자중관입 이후 석션에 의한 관입으로 설치하는 공법이며, 대형장비 대신 충분한 용량의 펌프만 있으면 기초의 시공이 가능하므로 시공이 간편하고 경제적인 공법으로 알려져 있다. 본 연구에서는 석션버켓기초의 경제성을 검토하기 위하여 상부지반이 사질지반과 연약지반인 경우일 때 대수심 조건에 적용 가능한 기초형식인 자켓과 석션버켓기초를 적용한 트라이포드의 시공비용을 비교하였다. 그 결과 지반이 단단하고, 기초개수가 증가할수록 자켓형식보다는 트라이포드 버켓기초형식을 적용하는 것이 더 경제적임을 확인하였다.

• 한국항해학회지
• /
• 제21권1호
• /
• pp.1-11
• /
• 1997

Because of the sharp increase of its export and import container cargo volumes contrast to the lack of related Container Terminal facility, equipment and inefficient procedure, there is now heavy container cargo congestions in Pusan Container Terminal. As a result of such a situation, many container ships avoid their calls into Pusan port. This is a major cause that in tum kads to weakening intemational competitiveness of the Korean industry. This study, therefore, aims are to make a quantitative analysis of Container Terminal System through the computer simulation, especially focusing on its 4 sub-system of a handling system, 'it is checked whether the current operation is being performed effectively through the computer simulation. The overall findings are as folIows; Firstly, average tonnage of the ships visiting the BCTOC was 32,360 G/T in from January '96, to may '96. The average arrival interval and service time of container ships at BCTOC are 5.63 hours and 18.67 hours respectively. Ship's arrival and service pattern at BCTOC was exponential distribution with 95% confidence and Erlang-4 distribution with 99% confidence. Secondly, average waiting time and number of ships was 9.9 hours, 235 ships(38%) among 620 ships. Number of stevedoring container per ship was average 747.7 TED, standard deviation 379.1 TEU and normal distribution with 99% confidence. Thirdly, from the fact that the average storage days of containers at BCTOC are 2.75 days (3.0 days when import, 2.5 days when export). it is founds that most containers were transfered to the off-dock storage areas with the free periods(5 days when import, 4 days when export), the reason for which is considered to be the insufficient storage area at BCTOC. Fourthly, in the case of gate in-out at BCTOC, occupied containers and emptied containers are 89% and 11% respectively in the gate-in, 75% and 25% seperately in the gate-out. Finally, from the quantitative analysis results for container terminal at BCTOC, ship's average wating time of ships was found to be 20.77 hours and berth occupancy rate(${\rho}$) was 0.83. 5~6 berths were required in order that the berth occupancy rate(${\rho}$) may be maintained up to 60% degree.

• 한국조경학회지
• /
• 제33권2호
• /
• pp.60-70
• /
• 2005

This study was carried out to elucidate the vertical characteristics of soil properties at six planted sites of land reclaimed from the sea, in Gwangyang Bay, Jeollanam-do Province, Korea. Based on the types of planting site, the chemical properties of the vertical soil layers varied. The vertical variation was great in the planting sites $Z_1\;and\;Z_2$, but less varied in the mounded planting sites $Z_3,\;Z_5,\;and\;Z_6$. Major reasons for the vertical variation in soil chemical properties included differences in the accumulation of organic matter, soil disturbance by heavy construction equipment, and heterogeneity of soil properties between soil horizons. As soil depths increased, soil salts varied. The electrical conductivity (ECe) increased in the lower areas of planting sites $Z_1\;and\;Z_2$, and the disturbed, saline planting site $Z_3$, but decreased in the lower areas of $Z_3,\;Z_5,\;and\;Z_6$. These tendencies did not coincided with exchange cation concentrations $(Na^+,\;K^+,\;Mg^{++},\;Ca^{++})$. Both total carbon (T-C) and total nitrogen (T-N) accumulated more in the lower areas of planting sites than in the higher areas, and levels were higher closer to the surface than in the soil depths. It is supposed that these tendencies are related to the accumulation of fallen leaves or other organic matter at the soil surface, and the soil chemicals then slowly move downward from the surface. Impediments to tree growth included soil hardiness, high soil salinity and exchangeable cation concentration, low soil moisture content, acidic or alkaline soil, low organic matter, heterogeneity of soil texture and establishment of soil stratification.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.764-765
• /
• 2010

인체의 진단에 사용되는 의료용 X선 기기는 비 침습적인 방법으로 인체 내부의 진단이 가능하여 의료기관에서 진단에 매우 큰 비중을 차지하고 있다. X선의 발생에 가장 중요한 고전압 발생장치는 기존 변압기 식이 주로 사용되었으나 크고 무거우며 직류 고전압의 리플이 커서 발생효율이 낮다. 이러한 단점을 보완하기 위해 인버터를 사용하여 입력전원의 주파수를 고주파하는 인버터 방식의 고전압 발생장치가 주로 사용되고 있다. 본 연구에서는 펄스폭 변조 방식을 적용하여 관전압과 관전류의 동작을 제어 하였으며, 오실로 스코프를 이용하여 동작 결과를 확인하였다.

• 대한기계학회논문집A
• /
• 제39권2호
• /
• pp.195-201
• /
• 2015

전기굴삭기는 배터리에 저장된 에너지로 전동기-유압펌프를 구동해서 유압 에너지를 생성하고 이를 작업에 활용한다. 기존 유압굴삭기의 유압펌프는 디젤 엔진의 운전 효율에 최적화된 레귤레이터에 의해 제어되고, 유압펌프 자체의 효율은 고려되지 않았다. 전기굴삭기는 배터리를 에너지원으로 사용하기 때문에 전동기의 효율뿐 아니라 유압펌프의 효율을 함께 고려한 제어가 요구된다. 통합 제어를 위해서 유압펌프와 전동기의 출력과 효율 특성을 분석하여 효율맵을 작성하였고, 이를 바탕으로 최적동작맵을 구성하고 통합 제어 알고리즘을 개발했다. 알고리즘의 효과를 확인하기 위해 전기굴삭기 MILS 를 구성해서 통합 제어 알고리즘을 적용했다. 굴삭기 작업 시뮬레이션 결과는 통합 제어 알고리즘이 시스템 효율을 향상 시켰음을 보여준다.

• 한국의류학회지
• /
• 제39권1호
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• 한국산업보건학회지
• /
• 제19권4호
• /
• pp.390-402
• /
• 2009

This study aimed to examine the general characteristics of individual workers, psychosocial working environment, and ergonomic risk factors which affect the status of musculoskeletal disorders. Self-report was carried out for musculoskeletal symptoms and ergonomic risks in working environment in 856 production workers in 16 small to medium sized manufacturing companies. Musculoskeletal symptoms were examined with a standardized questionnaire, and ergonomic risks were evaluated with a qualitative self-administered instrument for the tasks related to musculoskeletal disorders. Major findings were as follows: 1) Complaint rate for musculoskeletal symptoms was higher in female, aged, married workers with longer working hours, less leisure/hobby activity, longer household working hours and history of disease or accident. 2) Complaint rate for musculoskeletal symptoms was significantly higher in workers with dissatisfaction, difficult tasks, and no self-control at work. 3) Complaint rate for musculoskeletal symptoms was significantly higher in workers involved in tasks with major ergonomic risk factors, and handling heavy equipment. 4) Explanatory power increased the model with the musculoskeletal symptoms as dependent variable and demographic variables, psychosocial working environment and ergonomic risk factors included, and total explanatory power of 18.6% revealed the significant effect. Based on the results, we can conclude that musculoskeletal symptoms in manufacturing workers are associated with individual demographic characteristics, psychosocial working environment and ergonomic risk factors.