• 산업기술연구
• /
• 제24권A호
• /
• pp.17-22
• /
• 2004

In the study, we have developed a straightening system for 304 micro wires that are normally used in the medical and semi-conductor fields. To apply heat to the micro wires, we introduced the direct wire heating method which generates the thermal energy by the electrical resistance of the wire itself. To avoid the deterioration of the wire surface by the environment, such as the oxidation or the hydration, the $N_2$ gas was filled in the glass pipe in which the straightening process was being performed. A precision tension meter was also attached to control the tension of the wire during the heating and straightening process. In order to control the straightening process, several experimental investigations with varying the tension, the feeding velocity and the temperature (current) was carried out. As a result of experiments, we obtained the optimal processing conditions satisfying the straightness requirement of the micro wires.

• 한국터널지하공간학회 논문집
• /
• 제21권6호
• /
• pp.811-823
• /
• 2019

최근에는 수직구 구조물 시공방법으로 현장타설 공법 대비 시공속도가 빠르며, 안전하고 경제적인 연속상승 슬립폼 공법이 다수의 현장에 적용되고 있다. 슬립폼 공법으로 시공 가능한 높이는 2.5~4 m/day로 알려져 있는데, 콘크리트 온도가 10~30℃의 범위 밖에서는 강도 변화나 탄성 특성의 변화에 미치는 영향이 크므로 동절기 공사에서는 3 m/day 이상의 시공속도를 내기가 어렵다. 또한, 콘크리트는 수화 작용으로 인해 수화열이 발생하는데, 이는 콘크리트의 온도 균열을 초래한다. 따라서 슬립폼 연속상승시 콘크리트의 온도 제어 양생이 필요하며, 본 연구에서는 히팅 패널 및 시험용 연속상승 장치를 개발하여 반발경도, 초음파 전파시간, 수화열 및 외부온도를 측정하였다. 이를 기반으로 히팅슬립폼을 제작하였으며, "김포 현장"과 "신월 현장"에 히팅슬립폼을 적용하였다. 김포현장은 주간(08:00~17:30) 평균 1.9 m/day 또는 0.200 m/hr, 신월 현장은 2.0 m/day 또는 0.210 m/hr를 목표 상승속도 값으로 비교하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.119-122
• /
• 2009

As architectures have recently become high-risers and mega-structured, stable high strength products have been ensured. Accordingly, use of precast concrete accouplement has been increased in order to facilitate air compression and rationalize construction. Since not only external heating but a1so internal temperature rise caused by the accumulation of cement hydration heat in manufacturing process, precast concrete members with large cross-section used for high-rise mega-structure's columns and beams may exhibit different temperature history compared to the precast concrete members for wall and sub-floor with relatively small cross-sections. Therefore, this study aims to elucidate the characteristics of temperature history of mass concrete members cast with high-strength concrete fur precast concrete application. In this study, large cross-sectional precast concrete mock-up, unit cement quantity, and temperature histories in manufacturing precast concrete member under different curing condition were inclusively investigated.

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.174-178
• /
• 2008

본 연구에서는 균일침전법으로 합성된 $CaCO_3$를 하소한 후 수화시키는 방법을 이용하여 소석회를 제조하였다. 소석회를 제조하기 위하여, 염화칼슘$(CaCl_2)$과 우레아(Urea)가 출발 물질로 사용되었으며 염화칼슘 수용액과 우레아 수용액을 혼합하여 가열하는 동안 반응용기 내에서 탄산칼슘이 합성되었다. 침전물들을 여과하고 증류수와 에탄올로 수 차례 세척하였으며 건조시켰다. 소석회는 하소된 탄산칼슘의 수화과정을 통하여 합성되었다. 최적의 합성조건을 선정하는데 있어 실험의 잡음인자를 최소화하고 결과를 통계적으로 추론할 수 있는 실험계획법(다구치 실험계획법)을 이용하였다. 제조된 탄산칼슘을 $1000^{\circ}C$에서 30분 동안 하소시킨 후 에탄올 및 옥살산이 첨가된 증류수로 수화시킴으로써 결정입자 크기가 약 50 nm인 소석회를 제조할 수 있었다.

• 공업화학
• /
• 제33권6호
• /
• pp.588-593
• /
• 2022

MgO 입자 표면에 첨가된 P₂O₅의 가수분해, 발수성, 그리고 절연 거동에 미치는 영향을 조사하였다. MgO 표면에 첨가된 P₂O₅는 가수분해반응 억제와 발수성을 동시에 나타내기 때문에 독특한 절연거동을 나타내었다. 따라서 절연거동은 MgO의 표면수화반응에 의한 Mg(OH)₂와 OH^-전하 전달비와 친수성에 반비례하였다. 시효에 따른 MgO의 절연성은 표면수화반응, 첨가된 도펀트 종의 밴드갭, 그리고 도펀트의 친수성과 소수성에 강한 영향성과 의존성을 나타내었다. 마지막으로 친수성인 MgO의 표면수화반응을 억제하는 전기절연성을 발현하여 열전달매체 응용분야에서 큰 잠재력을 제공하는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권4호
• /
• pp.132-139
• /
• 2017

본 연구에서는 저온환경에서 콘크리트 동해를 방지하기 위해 생석회의 화학반응을 활용한 발열시트 및 단열재를 사용하여 제작한 거푸집 특성을 실험을 통해 평가하였다. $-10^{\circ}C$ 정온조건에서 거푸집 실험 결과, 발열시트가 부착된 거푸집의 경우 발열시트 내부 생석회의 발열로 인해 타설 초기에 일반거푸집에 비해 $10^{\circ}C$이상 높은 온도이력을 보여주었고 단열재를 부착한 거푸집의 경우 콘크리트 수화열을 보존하여 지속적으로 높은 온도를 유지하는 특징을 나타냈다. 아이소핑크와 발열시트를 부착한 거푸집과 진공단열재를 붙인 거푸집이 압축강도나 적산온도에서 가장 높은 값을 가졌다. 압축강도 측정시 진공단열재 및 아이소핑크와 발열시트를 부착한 거푸집이 재령 3일에서 약 5 MPa로 가장 높게 측정되었다. 몽골 현지 외기온도에서도 실험을 하였는데 앞선 결과와 마찬가지로 발열시트, 단열재를 함께 붙인 거푸집이 48시간 동안 $25^{\circ}C$ 이상으로 가장 높은 온도이력를 나타내었다. 따라서 거푸집에 발열시트 및 단열재 부착을 함으로써 발열 및 단열효과로 인해 저온환경에서 콘크리트 강도발현에 도움을 주는 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.517-523
• /
• 2007

For the preparation of tricalciumaluminate $(C_3A)$ clinker, in traditional clinkering method using oxides and carbonates as a raw material, uneconomical repetition of burning have been necessary to avoid the melting of clinker by eutectic reaction in the system $CaO-Al_2O_3$. In this study, special starting raw materials for the clinker burning were prepared from a mixture of oyster shell and aluminium hydroxide by heating to $1100^{\circ}C$ and hydrating at $30^{\circ}C$. The starting raw materials, hardened body with weak hydraulic strength, were mainly composed of $C_3AH_6$ formed by resolution-precipitation mechanism of the system $CaO-Al_2O_3-H_2O$. By heating them, relatively pure $C_3A$ clinker could be obtained by one-time burning at the fairly lower temperature than that of conventional method. The easier formation of $C_3A$ clinker seemed to be caused by higher compositional homogeneity and stoichiometry of the starting materials, high surface area and crystallographic instability of the thermally decomposed products, and the catalytic effect of decomposed moisture on the early-stage crystallization of calciumaluminates. The basic hydration behavior of the clinker was also confirmed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.49-52
• /
• 2007

Recently, as architectural concrete structures become high-rise and megastructured, concrete become high-strengthened and, by ensuring products of more stability, air compression and rationalization of construction are required. In general, product management test of precast concrete member, specimen for management cured in the same condition with precast concrete member is substitutively used for strength test. However, large cross-sectional precast concrete members such as columns show large temperature increase in manufacturing process not only by external heating but also by concrete itself's hydration heating. Therefore, it is expected that specimen for management to predict strength and compression strength of precast concrete member shows different temperature history and strength characteristics. Concerning this, in order to suggest temperature history and strength characteristics of high strength mass concrete suitable for precast concrete application, this study comprises the inclusive investigations on the relations between management specimen with similar temperature history and core strength, and the strength characteristics per member cross-section dimensional value and per water-bonding material ratio value.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.169-170
• /
• 2023

In this study, light-heat generating materials were produced in two ways, and the performance of two light-generating insulation sheets was reviewed. As a result of the experiment, it was possible to confirm the improved heating performance of the light heating insulation sheet compared to the existing bubble sheet. The light heat insulation sheet (b) showed improved thermal properties compared to the existing bubble sheet, and it is believed that the temperature has increased due to the combined effect of initial hydration heat and heat generation after installation. In future studies additional experiments are needed to compensate for the insufficient insulation performance due to the single bubble sheet through the double bubble sheet and to adjust the amount of light-generating materials added as a consideration of the optimal heat-generating effect of the light-generating insulation sheet (b).

• Journal of Pharmaceutical Investigation
• /
• 제19권4호
• /
• pp.195-202
• /
• 1989

In attempt to improve the chemotherapeutic activity of adriamycin, adriamycin-entrapped HSA microspheres were prepared and investigated by the various in vitro experiments. The shape, surface characteristics and size distribution of HSA microspheres are observed by scanning electron microscopy. The in vitro drug release, albumin matrix degradation by protease of HSA microspheres were studied. The shape of HSA microspheres were spherical and the surface was smooth and compact. The size of HSA microspheres ranged from 0.4 to $2.5\;{\mu}m$ and have average diameters of 0.5 to $0.7\;{\mu}m$. The size distribution of HSA microspheres prepared by ultrasonication was mainly affected by albumin concentration and heating time in the process of hardening. In in vitro, almost all adriamycin was released from HSA microspheres for 8 hr. Analysis of the resulting adriamycin release profiles demonstrated that adriamycin is released from the microspheres in two distinct steps, a fast phase (until 30 min) followed by a much slower sustained release phase. Drug release, which is due to diffusion, was depended on the rate of matrix hydration. Drug release was largely affected by albumin concentration and heating temperature during the process of hardening. Albumin matrix degradation of HSA microspheres was affected by heating temperature and albumin concentration. Higher temperature and longer times generally produce harder, less porous, and slowly degradable microspheres.