• 천문학회보
• /
• 제44권2호
• /
• pp.56.4-56.4
• /
• 2019

The Korea Astronomy and Space Science Institute (KASI) has been collaborating with the NASA's Goddard Space Flight Center, to install a coronagraph on the International Space Station (ISS). The coronagraph will utilize spectral information to simultaneously measure electron density, temperature, and velocity. As a first step, we developed a new coronagraph and launched it on a stratospheric balloon in 2019 (BITSE) from Fort Sumner, New Mexico in USA. As the next step, the coronagraph will be be further developed, installed and operate on the ISS (CODEX) in 2022 to address a number of important questions (e.g., source and acceleration of solar wind, and coronal heating) in the physics of the solar corona and the heliosphere. Recently, BITSE has been launched at Fort Sumner, New Mexico. In this presentation, we will introduce the BITSE mission and discuss recent progress.

• 천문학회보
• /
• 제46권2호
• /
• pp.47.1-47.1
• /
• 2021

Transverse magnetohydrodynamic waves often called Alfvénic (or kink) waves have been often theoretically put forward to solve the outstanding problems of the solar corona like coronal heating, solar wind acceleration, and chemical abundance enhancement. Here we report the first spectroscopic detection of Alfvénic waves around a sunspot at chromospheric heights. By analyzing the spectra of the Hα line and Ca II 854.2 nm line, we determined line-of-sight velocity and temperature as functions of position and time. As a result, we identified transverse magnetohydrodynamic waves pervading the superpenumbral fibrils. These waves are characterized by the periods of 2.5 to 4.5 minutes, and the propagation direction parallel to the fibrils, the supersonic propagation speeds of 45 to 145 km s-1, and the close association with umbral oscillations and running penumbral waves in sunspots. Our results support the notion that the chromosphere around sunspots abounds with Alfvénic waves excited by the mode conversion of the upward-propagating slow magnetoacoustic waves.

• 태양에너지
• /
• 제13권1호
• /
• pp.22-30
• /
• 1993

본 연구(硏究)는 축대칭공기분류계(軸對稱空氣噴流界)에서 흐름방향(方向)에 수직(垂直)이 되도록 설치(設置)한 평판전열면상(平板傳熱面上)에서의 열전달(熱傳達)을 증진(增進)시키기 위해 공기분류(空氣噴流)에 선회(旋回)를 주었을때, 유동(流動)의 특성(特性) 및 전열면(傳熱面)에서의 전열증진효과(傳熱增進效果)와 이에 따른 난류강도(亂流强度)와 관계(關係), 그리고 선회(旋回)를 주었을때와 주지 않았을때와의 열전달율(熱傳達率)의 비교(比較)와 최적선회조건(最適旋回條件) 및 이에 대한 전열특성(傳熱特性)을 구명(究明)하기 위한 실험적(實驗的) 연구(硏究)이다. 본 실험(實驗)에서는 부가적(附加的)인 동력(動力)을 사용(使用)하지 않고 간편(簡便)하게 열전달(熱傳達)을 증진(增進)시키기 위한 방편(方便)의 하나로, 노즐출구(出口)에 Twisted Tape이 설치(設置)된 Pipe를 부착(附着)하여 공기분류(空氣噴流)에 선회(旋回)를 주었으며, Twisted Tape의 비틀림 각도(角度)에 따른 선회도(旋回逃)를 S=0., 0.056, 0.111, 0.167, 0.222로 하였다. 유속(流速)은 14, 20, 26, 32, 38, 44m/s의 조건(條件)으로, 전열면간거리(傳熱面間距離)(H/D)는 1에서 14까지 하였고, 열전달증진(熱傳達增進)을 일으키는 유동구조(流動構造)를 해석(解析)하기 위해 열선유속계(熱線流速計)를 사용(使用)하여 선회도(旋回度)에 따라 각점(各點)에서의 유속(流速) 및 난류강도(亂流强度)를 측정(測定)하였으며, 전열면(傳熱面)의 온도(溫度)를 측정(測定)하여 Nu를 구(求)하고 선회(旋回)를 주었을때와 주지 않았을때의 열전달증진효과(熱傳達增進效果)를 비교(比較)하였다. 또한 선회도(旋回度)에 따른 열전달(熱傳達)이 최대(最大)가 되는 최적거리(最適距離)를 제시(提示)하였으며 난류강도(亂流强度)와 열전달(熱傳達)과의 관계(關係)를 구명(究明)하였다.

• 태양에너지
• /
• 제17권2호
• /
• pp.13-22
• /
• 1997

본 연구에서는 실내로 유입되는 온기와 실내공기사이의 온도차 및 유입속도에 따라 발생되는 부력의 영향 및 실내로 유입된 온기의 혼합특성에 관한 열유동특성을 파악하였다. 혼합도의 정의로부터 임계속도($1.2{\sim}1.6m/s$)전 후로 기하학적영향에 대하여서 혼합과의 관계를 파악할 수 있었다. 그리고 축열표율과의 관계는 속도가 크고 기준온도차가 작을수록 부력의 영향을 적게 받아서 아네모스형, 베인형 모두 높은 축열효율을 나타냈다. 그리고 속도가 클 때는 베인형이 전반적으로 우수한 축열효율을 나타냈다. 따라서 유입속도에 의한 영향이 기준온도차에 의한 영향보다 지배적임을 알 수 있었다.

• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.75-81
• /
• 2014

Fossil energy is needed for a whole year greenhouse cropping due to climate in South Korea. Because the most of the fossil energy resources is imported, it is necessary to develop technology to be able to reduce the energy cost in order to manage greenhouse profitably. The greenhouse commonly consume less amount of energy as compared to other industrial sectors. Replacement of fossil fuel with solar thermal storage, therefore, can be an economical as well as environmentally sustainable option for greenhouse heating. The fluid flow, heat storage and radiation characteristic of the gravel bed model were analyzed to provide basic data for design of the experimental solar heated greenhouse with underground thermal storage using gravel. The air flow velocity in the gravel storage bed was proven to be affected from the capacity of circulation fan and the circulation method and the positive pressure method was proven to be the best among the different air circulation methods. The initial air temperature of the thermal storage bed of 1.2 m $wide{\times}9$ m $long{\times}0.9$ m deep was $10^{\circ}C$. After the thermal storage bed is heated by air of the mean temperature $4^{\circ}C$ during 9 hours, the temperature has increased about $20.3^{\circ}C$ and the storage of heat was about 33,000 kcal. The important factors should be taken into consideration for design of the solar heated greenhouse with underground thermal storage using gravel are insulation of rock storage, amount of storing heat, inflow rate and direction of inlet and outlet duct.

• 플랜트 저널
• /
• 제4권3호
• /
• pp.54-59
• /
• 2008

The resonance of boiler is caused by exciting force in the gas path and it generates the vibration by the harmony of boiler's dimensional factor. According to trending toward the boiler of increasing capacity and a bigger size, it has a problem of the vibration at back-pass heating surfaces. We can predict such vibrations as comparison between vortex frequency and gas column's natural frequency. We can't rely on the method for the past decades because of changing parameters, such as an allowable error, gas temperature, gas velocity, Strouhal number. We can reduce the vibration to use the seasoning effect and change the operating condition in coal fired boiler but it's not essential solution. When the vibration occurred in the model boiler, we must measures the acoustic pressure and frequency of places for considering the means. So far, we confirmed the problem from field measures and theoretical analysis about the acoustic vibration of boiler. We installed anti-acoustic baffle in a existing boiler to change the acoustic natural frequency at the cavity, which results in reducing the acoustic vibration. The first, we prove that the acoustic resonance is caused by harmonizing vortex shedding frequency of tube heat surface with acoustic natural frequency of cavity in the range of 650~750 MW loads. The second, the acoustic resonance at the back-pass heating surface has the third order of acoustic natural frequency at the second economizer. We install five anti-acoustic baffles at the second economizer to reducing the resonance. We confirm considerably reducing the acoustic vibration of boiler during the commercial boiler.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.53-63
• /
• 2017

The purpose of this study is to present an integrated analysis for energy use and its patterns as vertical locations of the dwelling units in apartment buildings which are located in an urban area and constructed by a renowned contractor. In order to enhance the effectiveness of the method, the original data of electricity, water, and gas bills which directly reflect the energy use are sorted and analyzed into several groups as vertical locations in each building. And also, by use of comparing and contrasting the data on a monthly and yearly basis, the accuracy of analyses for seasonal energy use and its patterns is strengthened. Comparative analyses used in this study describe the results that vertical locations of dwelling units do not have much influence on electricity and water usage, but are closely related with gas usage for a heating season. According to the analysis of gas usage, the units on the ground and right above pilotis need enhancement in the insulations for heating to mitigate energy loss. Also, the analysis for the middle floor units in each group describe the fact that the gas usage of the units on the ground is consumes 1.5 times greater than that of the typical floors. Therefore, enhanced insulation strategies need to be considered against the adverse condition that the heat loss increases as the wall facing the outside air increases or as the wind velocity increases through the pilotis.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.204-213
• /
• 2000

This study deals with jet impingement, which is extensively used in the process industries to achieve intense heating, cooling or drying rates and also widely employed as a test flow for turbulent models due to its complex flow configuration, on a flat plate by numerical methods. In this calculation, the finite volume method was employed to solve the Navier-stokes equation based on the non-orthogonal coordinate with non-staggered variable arrangement. To get a better understanding for the fluid flow and heat transfer characteristics of the turbulent jet impingements, $k-{\varepsilon}-{\overline{v^{'2}}}$ turbulent model was adapted and compared with the experimental data and the result of standard $k-{\varepsilon}$ turbulent model. Numerical calculations were carried out with various flow rates, nozzle to plate distances. In the case of the axisymmetric jet impingement on a flat plate, $k-{\varepsilon}-{\overline{v^{'2}}}$ turbulent model showed better agreement with the experimental data than the standard $k-{\varepsilon}$ turbulent model in the prediction of the mean velocity profiles, the turbulent velocity profiles. the turbulent shear stress and the heat transfer rate. The highest heat transfer rate can be obtained when the impingement occurs within the potential core..

• 에너지공학
• /
• 제19권3호
• /
• pp.195-202
• /
• 2010

최근 국내 연간 1차 에너지 사용량의 약 30% 이상이 폐열로 손실되어지고 있다. 이러한 현실을 타개하기 위하여, 본 논문에서는 장거리 열수송시 에너지 손실을 최소화할 수 있는 신기술로 화학 열변환을 이용한 장거리 열수송 기술을 채택하여, 화학 열변환에 있어서의 최적조건 도출을 목적으로 하였다. 화학 열변환을 위한 반응에 대해서는 많은 연구와 기술개발이 이루어지고 있으며, 그 중 물질이 안정하고, 값이 저렴하며, 생성물이 가스인 메탄올 분해 합성 반응이 가장 타당한 것으로 판단되었다. 본 연구에서는 장거리 열수송 기술 개발에 필요한 메탄올 분해 합성 반응 촉매를 각각 선정하여, 열수송 시스템 구축을 위한 메탄올 분해 합성 반응의 최적화 조건 도출을 위한 실험 연구를 수행하였다. 메탄올 합성 반응에서는 온도, 압력, $H_2$/CO ratio, 공간 속도, 촉매 형태에 따른 영향을 보았고, 메탄올의 분해 반응에서는 온도, 공간속도, 촉매 형태를 변수로 하여 상압에서 영향을 분석하여 메탄올 분해 합성 반응의 최적화 조건을 제시하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.634-637
• /
• 2005

Multichannel seismic data acquired in Ulleung Basin of East Sea for gas hydrate exploration. The seismic sections of this area show strong BSR(bottom simulating reflections) associated with methane hydrate occurrence in deep marine sediments. Very limited information is available from deep sea drilling as the risk of heating and destabilizing the initial hydrate conditions during the processing of drilling is considerably high. Not so many advanced status of gas hydrate exploration in Korea, the most of information of gas hydrate characteristics and properties are inferred from seismic reflection data. In this study, The AVO analysis using the long offset seismic data acquired in Ulleung Basin used to explain the characteristics and structure of gas hydrate. It is used primarily P-wave velocity accessible from seismic data. To make a good quality of AVO analysis input data, seismic preprocessing including 'true gain correction', 'source signature deconvolution', twice velocity analysis and some kinds of multiple rejection and enhancing the signal to noise ratio processes is carried out very carefully. The results of AVO analysis, the eight kinds of AVO attributes are estimated basically and some others of AVO attributes are evaluated for interpretation of AVO analysis additionally. The impedance variation at the boundary of gas hydrate and free gas is estimated for investing the BSR characteristics and properties. The complex analysis is performed also to verifying the amplitude variation and phase shift occurrence at BSR. Type III AVO anomaly appearance at saturated free gas area is detected on BSR. It can be an important evidence of gas hydrate deposition upper the BSR.