• 기계저널
• /
• 제16권3호
• /
• pp.271-276
• /
• 1976

A theory has been developed for impact heating as well as thermodynamics of impact. The result is very simple and convenient for engineering applications : T=$T(\frac{{V_0}}{V})^{\gamma}$, $where T_0$ and T are the temperatures before and after the impact, $V_0$/ and V the volumes before and after the impact, and $\gamma$ the Gruneisen constant, given in a table in this paper.

• 한국지능시스템학회논문지
• /
• 제17권1호
• /
• pp.7-12
• /
• 2007

본 논문은 에어컨시스템의 효율과 안정도에 영향을 주는 과열도와 저압을 제어하기 위한 다중 퍼지제어기 설계를 소개한다. 시스템 에어컨은 압축기 응축기 및 여러 대의 증발기와 확장 밸브로 구성되며, 냉매의 상태가 달라지면 시스템 전반적으로 그 영향이 파급되어 제어가 쉽지 않다. 이에 3대의 확장밸브와 1대의 압축기에서 동시에 과열도와 저압을 효과적으로 제어하는 다중 퍼지제어기를 설계한다. 제안된 퍼지 제어기는 연속형 간략추론 방식과 이산형 lookup_table 방식을 사용하고, 실수코딩 유전자 알고리즘(GAs)을 이용하여 최적의 퍼지제어기의 환산계수를 구한다. 그리고 기존 방식의 결과와 연속형 간략추론 방식 및 이산형 lookup_table 방식의 시뮬레이션 결과를 성능관점에서 상호 비교한다.

• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.503-515
• /
• 2017

최근 대형화되고 있는 지하구조물은 평상시는 물론 지진시에도 안정성을 확보하여야 한다. 특히 지하구조물 중에서도 해저터널은 지진시 안정성 유지가 매우 중요하다고 할 수 있다. 본 논문의 목표는 해저터널의 지진시 안정성 유지에 획기적인 시설물 중의 하나인 Flexible segment에 대해서 진동대 시험을 이용한 효용성 검증이다. 검증된 결과를 토대로 3차원 동해석을 통해 Flexible segment의 최적위치를 제안하는 것이 또 다른 하나의 논문 목표이다. 본 연구 수행을 위해 선정한 가상해저터널 단면에 상사율(1:100)을 고려한 1g 진동대 시험(1g Shaking Table Test)을 경주지진파, 인공지진파, 종방향, 횡방향, Flexible segment유무 등을 고려해서 모두 8회 이상 수행하였다. 진동대 시험 수행결과 전 시험 모두에서 Flexible Segment가 해저터널 내진성능향상에 효과가 있음을 확인하였다. 또한 시험적으로 내진성능 향상에 효과가 검증된 Flexible segment의 최적 위치를 선정하기 위하여, 3차원 동적 수치해석을 수행하였다. 그 결과 분기구간에서 Flexible segment를 인접해 설치할 경우 지진가속도가 감쇠하는 것을 확인할 수 있었다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.148-156
• /
• 2015

Deck plates of ships or offshore structures would make out-of-plane distortion for their thin thickness. These distortions are usually straightened by thermal straightening such as flame heating method. After thermal straightening, the blocks are lifted and moved by cranes to assemble it at dry-dock stage. After this lifting process, out-of-plane deformation again happens frequently. And then, they continuously cause quality and accuracy problems in the final dry-dock process. So, it takes more time for repair and correction working. According to preceding research, the lifting process by cranes would offset the effect on thermal straightening. The target of this study is to develop a methodology analyzing the remaining efficiency of thermal straightening after block lifting. The development was based on the assumption of yield state at straightening region. Therefore the remaining efficiency was obtained by different stiffness slope while lifting & relieving. The efficiency formula was designed using inherent strain, and we made a table of zero-efficiency by cooling speed and class rule's steels. As a result, if the stress orthogonal to straightened line is calculated during lifting analysis by FEA, the efficiency can be obtained linearly to the values in the table. Finally, even optimized carling position can be designed by considering the regional data from series project and welding region on deck.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.304-309
• /
• 2009

The purpose of this study is to develop kitchen furniture design for 40-pyung apartment Houses based on stored item of Cooking, Eating and Utility Area. The research data is gotten at a field study of stored items of Cooking, Eating and Utility Area and depth interview. The results of this study were as follows; 1)The kitchen furniture the preparation unit and the sink, the kitchen table, the heating unit and the service table, arranged at the tall storage. 2)The total bulk considered and holding volume ($2.7m^3$) with ground clearance (40%) planned with about $4.21m^3$. 3)Assumed at height and 162cm did a lower part height with 860mm and the upper depth 340mm, did with 700mm where raises. the storage the ceiling which raises will select and considered and with 2200mm did. 4)Arrangement of the kitchen the kitchen form which is an open type (L/DK or L.D.K) arranged many in forms of letter.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.963-968
• /
• 2009

This paper deals with shrink fit analysis of rotor by 2D cross-section, 2D axis-symmetry, and 3D FEM model. And this paper presents 2nd order approximation function of thermal expansion displacement by design variables (shape dimension, heating temperature, sleeve length, interference etc.), table of orthogonal array and RSM(response surface methodology). The possibility of the rotor with shrink fit is evaluated by thermal expansion displacement. If thermal expansion displacement is larger than interference, shrink fit enable to make the rotor. 2D axis-symmetry model and 3D model are more reasonable than 2D cross-section model, because stress and strain is different along length of shaft.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3962-3973
• /
• 2022

Several critical heat flux (CHF) correlations including the look-up table in the MARS code have been assessed for the prediction of CHF in a downward-flow narrow rectangular channel. For the assessment, we built an experiment database that covers pressures between 1.01 and 39.0 bar, gap sizes between 1.09 and 6.53 mm, mass fluxes up to 25,772 kg/m²s, and under one-sided and two-sided heating conditions. The results of the assessment showed that the Kaminaga correlation has the best overall prediction compared to others. However, because the correlation uses global variables, such as inlet and outlet subcooling and total heat transfer area, it is difficult to use in a system code. A new CHF correlation is then proposed by replacing the global variables in the Kaminaga correlation with local ones and adding correction factors to consider the effect of gap size, mass flux, and the number of heating walls. Additional correction factor is added to consider the effect of inlet subcooling. It is shown that the new one is better than the Kaminaga correlation and it is easy to implement to any system code.

• 한국초등과학교육학회지:초등과학교육
• /
• 제31권3호
• /
• pp.321-333
• /
• 2012

The purpose of this study was to examine elementary school students' characteristics and difficulties in drawing and interpreting a line graph, and to present educational implications. Twenty five students(4th grader: 6, 5th grader: 9, and 6th grader: 10) at an elementary school participated in this study. We used a student's task which was about graphing on a given data table and interpreting his/her graph. The data table was on heating 200mL and 500mL of water and measuring their temperature at regular time intervals. We collected multiple source of data, and data analyzed based on the sub-variables of TOGS. The some results of this study are as follows: First, five children (20.0%), especially two of 10 sixth graders (20.0%), could not construct a line graph about a given data table. Second, twenty students (80.0%) had the ability on 'Scaling axes' and on 'Assigning variables to the axes', however, only a student understood why the time is on the longitudinal axis and the temperature is on the vertical axis. Third, in the case of 'Plotting points', twelve children (48.0%) could drew two graphs on a coordinate. Fourth, in the case of 'Selecting the corresponding value for Y (or X)', twenty student had little difficulty. on 'Describing the relationship between variables', seventeen students (68.0%) understood the relationship between time and temperature of water, and the relationship between temperature and amount of water. Finally, eleven students (44%) had the ability on 'Interrelating and extrapolation graphs.' Educational implications are also presented in this paper.

• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.20-29
• /
• 2012

The green house on the waterfront is air-conditioned by a water-source heat pump system with riverbank filtration water. In order to supply riverbank filtration water in alluvium aquifer, the riverbank filtration facility for water intake and recharge, two pumping wells and one recharge well, has been constructed. The research site in Jinju, Korea was chosen as a good site for riverbank filtration water supply by the surface geological survey, electrical resistivity soundings, and borehole surveys. In the results of two boreholes drilling at the site, it was revealed that the groundwater table is about 3 m under the ground, and that the sandy gravel aquifer layer in the thickness of 6.5 m and 3.5 m occurs at 5 m and 7 m in depth below the ground level respectively. To prevent the recharge water from affecting the pumped water which might be used as heat source or sink, the distance between pumping and recharge wells is designed at least 70 m with a quarter of recharged flow rate. It is predicted that the transfer term, the recharge water affects the pumping well, is over 6 months of heating season. Hydrogeological simulation and underground water temperature measurement have been carried out for the pumping and recharge well positions in order to confirm the capability of sustainable green house heating and cooling.

• 한국식생활문화학회지
• /
• 제1권4호
• /
• pp.335-349
• /
• 1986

'Zu Bang Moon', a book of cooking, was written in Korean in the 17th century by Mr. Hwa. Various cooking methods of traditional foods were described in this book. The kinds of cookingfoods were Wine 28, Guksu (noodle) 3, Side dish 23, Seasoning 10, and Dessert 10. The materials used in the cooking foods were cereals, vegetables, fishes, meats, etc. 9 kind of Seasonings used in cooking foods such as salt, and herbs such as black pepper. The cooking methods were different and complicated. The way of heating were also different such as to stew, to boil, to steam, to pan-boil, to frying, etc. Utensils and table wares used for processing and cooking were poor and specific. The measuring units were not accurate and unscientific. Many of special words and expressions which are not used today in cooking and processing were, reviewed.