• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.3
• /
• pp.263-269
• /
• 1992

Radish green juice was used as a dual source for the production of plant protein precipitate and Candida utilis biomass. Precipitates ranging from 10.0 to 16.5g were obtained from a liter of radish green juice by heating at 80-10$0^{\circ}C$C for 1 to 10 min or by modification of the pH of radish green juice. Crude protein content of the precipitate was between 25 and 38%. The residue remaining after protein precipitation was used in turn for the cultivation of the yeast, C. utilis, in order to produce yeast biomass. C. utilis grew well in radish green residual juice and completed growth within 24 hr at 3$0^{\circ}C$ and 200rpm in shake flask experiments. Maximum dry cell weight obtainable from a liter of radish green residual juice was 19.5g, when the yeast was grown on the juice residue diluted 3 times or more with water to make sugar content be equal to or less than about 1.0%. Supplementation of 3-fold diluted radish green residual juice with yeast extract and (NH$_4$)SO$_4$ enhanced yeast biomass production and cell protein content significantly. Total high protein material obtainable from a liter of radish green juice was 33.0g.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.474-477
• /
• 2002

Equipment to cauterize tumors by an electrically heated Kanthal wire is under development. The wire( alloy of iron, chromium and Aluminum) keeps sufficient strength up to 1400 degrees in Celsius. Although AC 50Hz current source is used in the prototype experiment, RF current will be used in future. The diameter of the Kanthal wire was 0.3 mm which was connected to Kanthal wire of 0.8 mm. The thicker wire was used as a leading wire. The possibility of application of the heating wire in combination with an ultrasound endoscope was determined, where ultrasound endoscope is to be used to monitor the location on the wire and an extent of a tumor in digestive organs. This procedure requires the wire to be applied inside ultrasound transmitting media. First, the wire was applied in the degassed water in which a chicken liver sample was submerged. The wire, however, burned out in water soon after it became red-hot at 12 A. The reason is that large current is required for the wire to become red-hot due to strong convection. Starch paste of 3 weight percent was employed instead of water. This made the wire red-hot approximately at 6 A, showing the increased viscosity of the starch decreased the convection and the wire was cover by the steam. The liver sample was cauterized successively, while the location of the wire and the liver was monitored by an ultrasound diagnosis equipment outside the plastic vessel of the starch paste.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.470-475
• /
• 2003

KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-enthalpy geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating from KORP (Korea Research Council of Public Science & Technology) funding. Surface geologic and geophysical surveys including Landsat TM image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT) and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. By the end of 2003, two test wells of 1 km depth will be drilled and various kinds of borehole survey along with additional MT measurements and sample analysis will follow and then the detailed subsurface condition is to be characterized. Next step would be drilling the production well of 2 km depth and all further steps remain to be determined depending upon the results of the test well studies.

• Journal of Korean Elementary Science Education
• /
• v.31 no.3
• /
• pp.321-333
• /
• 2012

The purpose of this study was to examine elementary school students' characteristics and difficulties in drawing and interpreting a line graph, and to present educational implications. Twenty five students(4th grader: 6, 5th grader: 9, and 6th grader: 10) at an elementary school participated in this study. We used a student's task which was about graphing on a given data table and interpreting his/her graph. The data table was on heating 200mL and 500mL of water and measuring their temperature at regular time intervals. We collected multiple source of data, and data analyzed based on the sub-variables of TOGS. The some results of this study are as follows: First, five children (20.0%), especially two of 10 sixth graders (20.0%), could not construct a line graph about a given data table. Second, twenty students (80.0%) had the ability on 'Scaling axes' and on 'Assigning variables to the axes', however, only a student understood why the time is on the longitudinal axis and the temperature is on the vertical axis. Third, in the case of 'Plotting points', twelve children (48.0%) could drew two graphs on a coordinate. Fourth, in the case of 'Selecting the corresponding value for Y (or X)', twenty student had little difficulty. on 'Describing the relationship between variables', seventeen students (68.0%) understood the relationship between time and temperature of water, and the relationship between temperature and amount of water. Finally, eleven students (44%) had the ability on 'Interrelating and extrapolation graphs.' Educational implications are also presented in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.147-150
• /
• 2020

Relatively pure YBCO was first synthesized by heating a mixture of metal carbonates at temperatures between 1,000 and 1,300 K, resulting in the reaction: 4BaCO₃+Y₂(CO₃)₃+6CuCO₃+(1/2_-x)O₂ → 2YBa₂Cu₃O_7-x+1/3CO₂. Modern syntheses of YBCO use the corresponding oxides and nitrates. The superconducting properties of YBa₂Cu₃O_7-x are sensitive to the value of x, i.e., its oxygen content. Only those materials with 0≤x≤0.65 are superconducting below Tc, and when x ~ 0.07, the material superconducts at the highest temperature, i.e., 95 K, or in the highest magnetic fields, i.e., 120 T and 250 T when B is perpendicular and parallel to the CuO₂ planes, respectively. In addition to being sensitive to the stoichiometry of oxygen, the properties of YBCO are influenced by the crystallization methods applied. YBCO is a crystalline material, and the best superconductive properties are obtained when crystal grain boundaries are aligned by careful control of annealing and quenching temperature rates. However, these alternative methods still require careful sintering to produce a quality product. New possibilities have arisen since the discovery of trifluoroacetic acid, a source of fluorine that prevents the formation of undesired barium carbonate (BaCO₃). This route lowers the temperature necessary to obtain the correct phase at around 700℃. This, together with the lack of dependence on vacuum, makes this method a very promising way to achieve a scalable YBCO bulk.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.7
• /
• pp.3253-3260
• /
• 2014

Background: A case-control study was conducted to evaluate the effect of household exposure, dietary habits, smoking and Glutathione S-Transferases M1, T1 polymorphisms on lung cancer among women in Mizoram, India. Materials and Methods: We selected 230 newly diagnosed primary lung cases and 460 controls from women in Mizoram. Multivariate logistic regression analysis was performed to estimate adjusted odds ratio (OR). Results: Exposure of cooking oil fumes (p<0.003), wood as heating source for cooking (p=0.004), kitchen inside living room (p=0.001), improper ventilated house (p=0.003), roasting of soda in kitchen (p=0.001), current smokers of tobacco (p=0.043), intake of smoked fish (p=0.006), smoked meat (p=0.001), Soda (p<0.001) and GSTM1 null genotype (p=0.003) were significantly associated with increased risk of lung cancer among women in Mizoram. Significantly protective effect was observed for intake of bamboo shoots (p=<0.001) and egg (p<0.001). A clear increase in dose response gradient was observed for total cooking dish years. Risk for lung cancer tends to increase with collegial effect of indoor environmental sources (p=0.022). Significant correlation was also observed for interaction of GST polymorphisms with some of dietary habits. Conclusions: We confirmed the important role of exposure of cooking oil emission and wood smoke, intake of smoked meat, smoked fish and soda (an alkali preparation used as food additives in Mizoram) and tobacco consumption for increase risk of lung cancer among Women in Mizoram.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.139-145
• /
• 1993

Biogas created from animal waste is a precious energy source. A practical and successful utilization of the biogas is not easy, because there lie some difficulties in biogas production and facilities investment. In this study, the requisites for a successful biogas utilization were discussed. The production results obtained in the previous operation of anaerobic digestion plant were used for the simulation. When the slurry heating was designed for constant biogas generation, depreciation costs of the facilities amounted 1,175,000 yen per year, and biogas productions at $24.5^{\circ}C$, $30.0^{\circ}C$ and $35.5^{\circ}C$ were $16.8m^3$, $17.6m^3$ and $25.1m^3$, respectively. Removal ratios of organic matters were not so high. At $35.5^{\circ}C$, energy value of the biogas produced was estimated 125.5 Mcal per day, and the following heat loss (y Mcal/day) was brought about by the temperature difference ($X^{\circ}C$) between the digester and atmosphere; y = 0.769X - 5.375. The costs of biogas production per cow were assumed to decrease according to enlargement of feeding scale, especially on scales of more than 30 cows. On recent levels of costs and prices of energy in Japan, they were nearly equal to 2 to 3 fold of the price of municipal mixed gas when a anaerobic digester was compulsorily heated and kept at $30.0^{\circ}C$ or $35.5^{\circ}C$.

• Atmosphere
• /
• v.21 no.3
• /
• pp.229-241
• /
• 2011

The continuous urbanizations by a rapid economic growth and a steady increase in population are expected to have a possible impact on meteorology in the downwind region. Long-term (1972~2007) trends of precipitation have been examined in the mid-Korean peninsula for the westerly condition only, along with the sensitivity simulations for a golden day (11 February 2009). During the long-term period, both precipitation amount (PA) and frequency (PF) in the downwind region (Chuncheon, Wonju, Hongcheon) of urban area significantly increased for the westerly and light precipitation ($PA{\leq}1mm\;d^{-1}$) cases, whereas PA and PF in the mountainous region (Daegwallyeong) decreased. The enhancement ratio of PA and PF for the downwind region vs. urban region remarkably increased, which implies a possible urbanization effect on downwind precipitation. In addition, the WRF simulation applied for one golden day demonstrates enhanced updraft and its associated convergence in the downwind area (about 60 km), leading to an increase in the cloud mixing ratio. The sensitivity experiments with the change in surface roughness demonstrates a slight increase in cloud water mixing ratio but a negligible effect on precipitation in the upwind region, whereas those with the change in heat source represents the distinctive convergence and its associated updraft in the downwind region but a decrease in liquid water, which may be attributable to the evaporation of cloud droplet by atmospheric heating induced by an increase in an anthropogenic heat. In spite of limitations in the observation-based analysis and one-day simulation, the current result could provide an evidence of the effect of urbanization on the light precipitation in the downwind region.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.4
• /
• pp.93-103
• /
• 2006

Biogas is a byproduct after anaerobic digestion of organic materials and has been used as an energy source for heating and generating electricity. Demands of methanol for fuel mixed with gasoline and reactant in biodiesel production are steadily being increased. In this review, we summarized recent advancements in direct partial oxidation of methane to methanol with the brief history of methanol synthesis. The steam reforming and the catalytic oxidation of methane to methanol were compared, the former of which are mainly used in industrial scale and the latter in a stage of research and development. On the basis of this review, the possibility of methanol conversion from biogas was proposed in the aspects of the technological feasibility and the economical practicability.