• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.91-98
• /
• 1998

The current-fed high frequency inverter with separated parallel resonant capacitor is presented in this paper. The analysis of the proposed circuit is generally described by using normalized parameter, and are evaluated characteristics of the circuit.In addition, this paper proves the propriety of theoretical analysis in terms of the experimental waveforms using the switching device MOSFET. In the future, the proposed inverter will expected that it can be practically used as the high frequency power source for induction heating etc.ng etc.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.294-295
• /
• 2018

유도가열은 전자기 유도 현상을 이용하여 금속체를 직접 가열하는 방식이며 높은 변환 효율로 전기에너지를 열에너지로 변환할 있다. 이로 인해 금속의 단조, 용해, 표면경화, 풀림 등 여러 응용분야를 통해 철강 및 기계 산업에 기여하고 있다. 단조용 유도가열기 전원장치는 높은 전력용량을 사용하여 주로 SCR을 이용한 위상제어 정류기를 적용한다. 하지만 입력단의 저 역률 및 전류의 THD가 높은 단점을 가진다. 따라서 본 논문에서는 이러한 단점을 보안하기 위해 단조용 유도가열 작업에 맞는 인터리브드 방식의 벅 컨버터와 전류원 인버터를 사용한 고효율 유도가열 전원장치를 제안한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.161-164
• /
• 2009

This research is to show the mechanical properties of structural steels by welding at high temperature. Welding parts are divided with weld metal and HAZ(Heat Affected Zone). HAZ is formed by interval from welding heat source and heating and cooling rates. Then, the change of both microstructure and mechanical properties occurs. Discontinuity of mechanical and chemical property at HAZ is the cause of safety decrease of structure. At this point, in this research, tensile tests at high temperature with test pieces of base metal and weld metal of SS400 and SM490 are accomplished. From the results, the mechanical properties of both SS400 and SM490 are standardized without welding or non-welding.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1570-1575
• /
• 2004

In order to evaluate the performance of fire-fighting agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams are experimentally investigated. The current research focuses on the destruction of a fire-fighting foam subjected to heat radiation. A simple repeatable test for fire-protection foams subjected to fire radiation is developed. This test involves foam generation equipment, a fire source for heat generation, repeatable test procedures, and data acquisition techniques. Results of the experimental procedure indicated that each thermocouple within the foam responded in a similar manner and gradually to a temperature of $15^{\circ}C{\sim}20^{\circ}C$. At this point, each trace generally rises to a temperature of approximately $90^{\circ}C$. The temperature gradient in the foam as time passes increases with increased foam expansion ratio. In addition, it is determined that the temperature gradient along the foam for depth decreases with increased foam expansion ratio.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.629-634
• /
• 2007

The Alternative energy has lately attracted considerable attention due to the high oil price and environment problem. In this study, field test of facility for using the geothermal energy source from water-purifying device was constructed and monitoring devices are installed to estimate the efficiency of this system. Initial installation cost can be saved efficiently by connecting a heat pump system into the existing pumping well in site of water-purifying in Cheongju. One set of monitoring results during summer was presented and analyzed.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.640-645
• /
• 2007

An experimental apparatus to show the hot spot cooling of an IC chip using a thermoelectric cooler is developed. The spot heating in very small area is achieved by the applying CO$_2$ laser source and temperatures are measured using miniature thermocouples. The active effects of thermoelectric cooler on the hot spot cooling system such as rapid heat spreading in the chip and lowering the peak temperature around the hot spot region are investigated. The experimental results are simulated numerically using the TAS program, which the performance characteristics such as Seebeck coefficient, electrical resistance and thermal conductivity of the thermoelectric cooler are searched by trial and error. Good agreements are obtained between numerical and experimental results if the appropriate performance data of the thermoelectric cooler are given.

• Korean Journal of Microbiology
• /
• v.5 no.2
• /
• pp.55-60
• /
• 1967

Studies on the changes of methanol content in the manufacturing process of apple wine and apple brandy. The results from the studies of transition and changes of methanol content in the fermentation of wine and brandy from Korean apple, Kugkwang and Iwai are as follows. 1) Pectin, the source of methanol, can be extracted as dregs more than 85% of its in the process of pressing to get juice. 2) In the process of fermenting wine, the occurence of methanol depends on the condition of the apple itself (i.e. species, freshness, change in quality, or corruption). It seems that the insoluble pectin in the fresh apples changes into the soluble pectin as time goes by. 3) The heating treatment of fresh apples produced more methanol compared with nonheating treatment. 4) The content of methanol in apple brandy can influence free methanol content in mash pulp.

• Journal of the Korean housing association
• /
• v.15 no.2
• /
• pp.107-115
• /
• 2004

The objective of this study is to show the system Integrations and control method for operation of the Radiant Floor Cooling. The systems for radiant floor cooling system consist of only using the radiant floor cooling and the radiant floor cooling integrated with a dehumidification system. And the study is suggested control method with composed radiant floor cooling system through simulations. Radiant floor cooling systems compose of four main parts: an existing radiant heating panel, manifold, cooling source and controller, and sensors. If dehumidifying or supplementary cooling is needed, additional equipments such as PAC and AHU are needed. Simulation results show that control method only using radiant floor cooling system can prevent condensation and set room air temperature with the exception of hot and humid periods and control method using the radiant floor cooling integrated with a dehumidification system is comfort thermal environments and can reduce the cooling load quickly, moreover, show comfort control method to meet various cooling operation situations.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.577-584
• /
• 1996

Silicon oxide films with high hardness and water repellency were prepared by microwave plasma-enhanced CVD using four kind of organosilicon compound-fluoro-alkyl silane mixtures as source gases. An argon gas was used as a carrier gas for fluoro-alkyl silane. The substrate temperatures during deposition were controlled by resistant heating at a constant value between 50 and $300^{\circ}C$. The hardness of the films increased, but the deposition rate and the contact angle for a water drop decreased with increasing substrate temperature. The number of methoxy groups also affected the water repellency and hardness. The deposited films became more inorganic with increasing substrate temperature because of the thermal dissociation of reactants.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.814-819
• /
• 2000

The progress in the field of electronic materials has been especially significant for applications involving a range of electrical properties. Its importance is increasing with the increasing demand for integrated circuits. The sol-gel technique has been used for many years, and the metal alkoxides have featured prominently as source materials. The method consist of making a homogeneous solution of the component metal alkoxides in a suitable solvent, usually the parent alcohol; and then causing the hydrolysis under controlled conditions to produce a gel containing the hydrated metal oxide. The gel is then dried, and fired to produce a ceramic or glassy material at a temperature much lower than that required by the conventional melting process. This project consists of important theoretical considerations, processing techniques and applications related to electrophoresis derived thin films. In the electrophoretic process a metal alkoxide solution is gelled through hydrolysis-polymerization and converted the gel thin layer to an oxide by heating at relatively low temperatures.