• Korean journal of food and cookery science
• /
• v.31 no.1
• /
• pp.62-71
• /
• 2015

The purpose of this study was to evaluate the changes on the characteristics of the oxidative stability of Tenebrio molitor larvae during cold storage at $4^{\circ}C$. Pretreatment for T. molitor larvae was designed into three methods: raw (R), freeze-dried (F.D.), and pan-fried (P.F.). The water content of the raw sample (61.46%) was higher than those of other samples (F.D.: 5.02%, P.F.: 3.67%) and its high water content was expected to facilitate the oxidation of the raw sample. In our results, the peroxide value and the carbonyl value of all of the samples increased and the raw sample, after storage for 18 day, showed the highest value. The pan-fried sample had no significant increase in its lactic acid content, acid value, and thiobarbituric acid value; whereas those values were increased in the raw sample and the freeze-dried sample (p<0.05). The browning reaction was more progressed in the pan-fried sample than other samples at 0 day, but there was no significant change during the storage. The raw sample and the freeze-dried sample had their browning indexes increase with the increasing storage period (p<0.05). The pan-fried sample produced less oxidation products than the freeze-dried sample, indicating that the unheated sample was more susceptible to oxidation than the heated samples. In conclusion, heating treatment and low water content would be effective for improving the safety and stability of T. molitor larvae during cold storage.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.4
• /
• pp.589-595
• /
• 2011

In order to analyze principles of taking concoction and make clear the origin of contraindication against five pungent vegetables, the regulations of Guizhitang prescription in "Shanghanlun" the twelfth article and "Wushierbingfang", "Wuweihandaiyijian", "Jinguiyaolue" were researched. Four principles of taking concoction were put in order; strengthening the effect of concoction by eating hot rice gruel and wearing bedclothes, preventing decline of drug effect by food regulations, optimization of elution and effect of material herbs by crushing, low heating, determination of administration time based on manifestations of drug effect by sweating and its aspect. These principles and methods of taking concoctions were developed from boiling to simple processing of material herbs, contraindication in the middle of taking concoction and perspiration by wearing bedclothes and eating hot rice gruel in order from the analysis of medical literatures. The contraindication against pungent vegetables were generalized in early Dong-Han dynasty already, and the five pungent vegetables were inferred as Allium tuberosum, Allium bakeri regel, spring onion, wild rocambole and garlic in medical context to the exclusion of religious idea. The reason of prohibition against five pungent vegetables could be interpreted as optimization of therapeutic effects by pharmacological control of pungent ingredients because the healthy qi damage and evil qi retention were resulted from destroying of harmonious ying and wei by overeating pungent vegetables during disease state. Conclusively the regulations of Guizhitang prescription referred to taking concoction in "Shanghanlun" fulfilled their functions to maximize pharmacological effects through various ways inside and outside and these reasonal principles of taking concoction has been influenced over the traditional medical practice deeply.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.438-445
• /
• 2015

Among several thermal wood modification methods German oil heating technology was applied to Korean pine specimens by heat treatment at $180^{\circ}C$ and $200^{\circ}C$. In addition the matched specimens were heat-treated by Thermowood method. The heat-treated specimens were planed and their colors were measured with a colorimeter at 1 mm and 4 mm below the surfaces. The average lightness index (L*) of Oil-180 specimens was the largest followed by Oil-200 and Tmo-200 specimens. The average redness indexes (a*) of all specimens were increased by heat treatment, while the average yellowness indexes (b*) were variable. The average color differences (${\Delta}E*$) of Oil-200 and Tmo-200 specimens were above 30.0, while that of Oil-180 specimens was only 18.4. It can be concluded that the colors of the heat-teated specimens were uniformly changed because their average color difference indexes (${\Delta}E*$) between the inner layers were below 6.0.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.423-432
• /
• 2017

Objectives: This study was conducted to evaluate asbestos handling history of workers at automobile manufacturing plants in Korea. Methods: National regulations on asbestos and Korea Occupational Safety and Health Agency(KOSHA) database on the information of asbestos containing products were reviewed. We investigated asbestos related materials from one automobile manufacturing plant. Material safety data sheets(MSDS) collected in 2010, work environment monitoring results reported from 2000 to 2013, trade union reports and asbestos survey reports were reviewed. We also interviewed workers with long career and did walk-through survey. Results: The Ministry of Labor in Korea has permitted asbestos manufacturing since 1990. In 1997, the use of crocidolite and amosite asbestos were banned. In 2007, the Korean government announced a total ban on the manufacturing, importation and use of all kinds of asbestos, which took full effect in 2009. A total of 174 asbestos products information from KOSHA database was analyzed. Extruded cement panel for building, special brake for crane farm machinery, gasket, joint sheet and thermal insulator were produced until 2007. From automobile manufacturing plant survey, we confirmed that asbestos containing materials(ACM) such as gasket, heating induction materials have been used until 2011. Asbestos containing building materials(ACBM) such as bamlites, slate and ceiling tex were reported at 122 asbestos dismantling projects in 2014. Conclusion: Although the use of all kinds of asbestos were banned from 2009, ACMs and ACBMs installed before 2009 were still found at automobile manufacturing plant until 2011 and 2014 respectively. In particular, asbestos slates should be managed because most of slates had not been removed until 2014.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.223-226
• /
• 2009

In this study, we investigated the recovery of copper and synthetic fuel from the waste wire by low temperature pyrolysis which can overcome problems of the recent incineration methods. Through thermal decomposition process of waste wire, we achieved the big advantage of getting usable resources as the forms of copper and fuel with a very high value. The TG/DTA and small-scale reaction experiments were carried out to determine an optimum temperature for waste wire pyrolysis. And the pyrolysis was done at 350, 450, and $550^{\circ}C$, respectively, and heating rate of the TG/DTA was $5^{\circ}C/min$ untill $700^{\circ}C$. The result shows that the optimum temperature range for dehydrochlorination of PVC was $280{\sim}350^{\circ}C$, as a lower temperature range than $400{\sim}550^{\circ}C$ of PE and PP. Practically over 95% of copper metal and synthetic fuel, which has the 8027 kcal/kg as a calorific value, were recovered from the waste wire samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.353-353
• /
• 2011

Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.191-198
• /
• 2008

The thermal degradation characteristics of high molecular components obtained from pyrolysis of mixed waste plastics have been studied by thermogravimetric analysis (TGA) and gas chromatography spectrometry (GC-MS). The kinetics of thermal degradation has been studied by a conventional nonisothermal thermogravimetric technique at several heating rates between 10 and $50^{\circ}C/min$. The dynamic thermogravimetric analysis curve and its derivative have been analyzed using a variety of analytical methods reported in the literature to obtain information on the kinetic parameters such as activation energies and reaction orders. The yields of liquid products have been monitored by batch pyrolysis reactor under various reaction temperatures and reaction times. And the characteristic of liquid products with the increase in reaction temperature has been performed by GC-MS.

• Korean Journal of Acupuncture
• /
• v.28 no.4
• /
• pp.29-40
• /
• 2011

Objectives : This study estimated antioxidant effects of the moxi with ginger tar (MGT) ; chemical combustion products produced by moxibustion with ginger during combustion. Methods : To do this aim, we investigated total polyphenol and flavonoid contents, SOD (superoxide dismutase) scavenging activity, ABTS (2.2-azino-bis-3-erthylbenzo-thiazoline-6- sulfonic acid) & DPPH(2,2-Dipheny1-1 -picryl-hydrazyl) radical's scavenging ability of MGT. Results : Total polyphenol contents of MGT was $7.8{\pm}0.09$ mg/g in 10 mg/ml, SOD activity was $42.51{\pm}3.39%$ in 200 ug/ml, DPPH radical scavenging effect of MGT was $83.24{\pm}0.01%$ in 200 ug/ml and ABTS radical scavenging effect was $41.88{\pm}0.16%$ in 200 ug/ml. Conclusions : In this study, the effects of moxi with ginger could be induced by not only heating stimulus on acupoints but also chemical stimulus produced during combustion of moxibustion, MGF. The advanced study about biological mechanism through meridian system, skin aging, and inflammation on MGT will be required.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.4 s.34
• /
• pp.127-140
• /
• 2004

The purpose of this study was to find out the interior environment, teaching equipments and tools, practical usages and related problems of the Home Economics practice room as a special room of Home Economics in middle school. The data were collected with questionnaire through a mail from 150 teachers charged in the Technology $\cdot$ Home Economics of the middle schools in the Gyeonggi Province and Incheon Metropolitan City. There were Home Economics practice rooms in the most of the middle schools. The room was used for the Home Economics class as well as for many other activities. which sometimes disturbed the class in the room. The frequency of the usage of the room was relatively low and limited mostly to the cooking class and somewhat sewing class because of the lack of environmental equipment and facilities such as heating, cooling. ventilating systems and furnishings such as table. chair as well as teaching materials. etc. Teachers wanted to use the room for all units of the Home Economics class applied to various teaching methods in the room. The improvement of the interior environments and teaching materials could facilitate the variety of the class in the Home Economic practice room.

• Korean Journal of Acupuncture
• /
• v.22 no.2
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.