• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.895-902
• /
• 2018

Energy consumption in buildings is close to 40% of the total national energy consumption in developed countries such as US and Japan, and Korea accounts for 24% of total energy consumption. In buildings, HVAC can't freely control the cooling flow rate according to the required calorie, so energy is not used efficiently. Therefore, by using the energy saving valve, the flow rate can be controlled by the required amount of heat and the energy can be saved. In this paper, we define basic conditions and develop control and monitoring boards for building energy saving valves based on PIC processor with low power and high cost-effectiveness. The designed board displays and transmits in real time information about two temperature values, flow values and calculated calories for temperature difference measurement. The developed board will be useful for real - time monitoring of the state of the valve in the future and development of the valve for the offshore.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.11
• /
• pp.1046-1053
• /
• 2010

The objective of this study was to investigate the pyrolytic reaction characteristics of a mixed fuel of municipal solid wastes and low-grade anthracite. The reaction variables are pyrolysis condition of mixing ratio, reaction temperature, temperature increase rate. As a result, the optimum mixing ratio was 20 wt.% low-grade anthracite in MSW, which maintains for the low heating value over 3,500 kcal/kg on pyrolysis. The most high reaction velocity constant was shown at $700^{\circ}C$. Also, under the all experimental condition, the reaction velocity constant increased linearly as temperature rate increase, but pyrolysis has to be considered electric power cost and yield of char at lower temperature rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.353-353
• /
• 2011

Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.116-120
• /
• 2004

Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.179-184
• /
• 2011

The development of new energy has attracted consideration attention due to the high oil price and environmental problems. In advanced country, they have tried to carry out a long range plan for energy. We need to develop new energy for Low Carbon Green Growth in Korea. The building is 30% among ratio of energy consumption in Korea. And in the past, heating energy was high ratio for energy using at home. But recently, the demand for cooling energy keeps growing due to rising average temperature on the earth and improvement of life quality. In this situation, the energy of lake water and ocean water has studied to utilize in advanced country because of low temperature at underwater. But the study for deep water is still a lot left to do. In this study, we analyzed district cooling system and the present condition. Analyzing the deep lake water cooling system in Toronto, we found an application of district cooling system using deep ocean water. Deep lake water uses heat source for district cooling and water source for city in Toronto. So reducing the initial cost, this city had economic effect. When DLWC was applied at existing building, the heat exchanger was installed instead of cooling tower and refrigerator. And the heat exchanger used to connect main pipe with cool water on city. System using deep ocean water can be applied as a similar way to supply cool water from lake to building.

• Clean Technology
• /
• v.11 no.4
• /
• pp.205-211
• /
• 2005

There have been many technologies and materials proposed for realizing microlens array, and plastic injection is recognized as the most promising one because of several merits such as optical properties, impact resistance, formability, lightening and environmental adaptability. Since PR reflow for injection template fabrication enables the lens shape control easier, and the sample technology more effective for mass production, it lowers the cost, enhances integration, and reduces process steps, which leads to be environmentally benign. However injection of polymers may face the difficulty of formability depending on their properties. In order to overcome the difficulty, fast heating/cooling technology was introduced in this study, and microlenses were fabricated and evaluated. template obtained by PR reflow method was heated and cooled fast during injection to fabricate microlens array. PC and PMMA polymer materials were compared, and it was realized that PMMA showed much better formability due to its lower melting temperature. Injection parameters of pressures and velocities were driven out for injection optimization.

• Korean Journal of Community Nutrition
• /
• v.8 no.5
• /
• pp.708-715
• /
• 2003

The purpose of this study was to investigate the status of recognition and intake of Saeng shik among housewives in Seoul, Busan, Daegu, Kwangju and Daejeon during February, 2002. Saeng shik is an uncooked freeze dried powdered food made from grains and vegetables. We interviewed 800 housewives, aged 30 to 49 years, living in urban areas. The survey was conducted using individual interviews on demographic characteristcs, status of recognition of Saeng shik, and the intake of Saeng shik. The data was analyzed using a SPSS program. The results were summarized as follows: Forty percentage of the subjects were well acquainted with Saeng shik. More than 60% of the subjects understood that Saeng shik is ‘the thing of grains and vegetables in the form of freeze-dried powder without heating process’. Saeng shik was taken by 16.9% of subjects. There was a significant regional and economic level difference in Saeng shik intake (p<0.05). Among the reasons given for Saeng shik intake, meal substitution ranked the highest. Other reasons were prevention of adult diseases, or it being a low calorie food. The survey questioned which the subjects considered before buying Saeng shik, taste, effect, constitution, sanitation and safety, satiety. ‘Taste’ ranked the highest. Among the subject who had experienced taking Saeng shik, 35.6% answered that they would continue taking Saeng shit. The reasons given for stopping taking Saeng shik included its high cost and taste. The subjects recognized it not only as a meal substitute, but also as a nutrient supplement. Based on these results on urban housewives' status of recognition of Saeng shik and their intake of it, more research is needed to improve Saeng shik.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.1
• /
• pp.53-60
• /
• 2020

This paper aims to examine the insulation performance of insulated gang form by changing the energy (power) consumption and concrete calorific value to assist in concrete protection in cold weather. According to the test results, the general gang form will generate three times the energy (power) consumption for 12 hours after the concrete is poured. In contrast, insulated gang foam consumed no energy (power) for 21 hours after pouring. The final power consumption was 3.7 times higher than that of the general gang form, confirming the improved performance of insulated gang form with regard to energy (power) consumption. The calorific value examination shows that the calorific value changes significantly according to the change of outside temperature after concrete placement in the case of the general gang form. However, in the case of the insulated gang form, only a slight heat loss occurred in the part of the frame, and it showed a constant heating pattern from the concrete casting to the demolding of the mold.

• Journal of Families and Better Life
• /
• v.28 no.6
• /
• pp.81-94
• /
• 2010

This qualitative research was designed to explore the use of housing among Korean Chinese people in Harbin, China. Focusing on the use which based on the epistemology of housing adjustment, this was particularly designed to examine its cultural assimilation and acculturation on the way of life course, it employed the in-depth interview on the oral history of 5 interviewees in their 60s and 70s, individualized interviews were conducted from May 28 to 31 in 2010. Key findings were summarized as follows; 1. The free market reform in China resulted in privatization that allowed respondents to become homeowners, and the ownership was viewed as part of family asset centered upon a sense of solidarity. 2. Although homeowners in multi-story houses were responsible to decorate interior spaces, the common features in using interior spaces were found: entrance had no thresholds; kitchen was small, lack of storage cabinets, tile-flooring; washers were installed inside bathroom; and newly built apartment didn't have proper space to store Korean fermented foods. It was observed that housing adaptation outweighed housing adjustment. Those who used to live in Chinese houses with indoor-wearing-shoes or Russian houses with indoor-wearing-slippers were receptive to the use of dining table and bed, and the community heating system discouraged the use of individual electric water heater because of high electricity cost. 3. In daily life, eating habit wasn't much changed to the Chinese style, meals were shared, dish sterilizer was popular, and Kimchi fridge wasn't used. Because of the influence of the Chinese culture, such Korean traditions as ancestral rites and bedroom allocation tradition faded away, but traditional family values remained unchanged. In conclusion, Korean Chinese people experience normative housing deficits and adaptation selectively incurred. It's implied that residential design meets the needs resulting from the dual culture in terms of cultural assimilation and acculturation.