• 생물환경조절학회지
• /
• 제28권1호
• /
• pp.46-54
• /
• 2019

히트펌프와 냉온수 배관을 이용한 촉성재배 '설향' 딸기의 관부와 근권부에 대한 국소 냉난방 시험과 정식 전 딸기묘의 단근처리 시험을 수행하였다. 정식(2017년 8월 31일) 후 주간의 관부 표면온도는 국소냉방구가 $18{\sim}22^{\circ}C$로 화아분화에 적합한 온도를 유지한 반면 무처리구와 근권부 냉방구는 화아분화 한계온도인 $25^{\circ}C$를 상회한 $30^{\circ}C$ 이상으로 나타났다. 정식 후 30일 경과 시의 생육조사 결과 국소냉방처리 간의 생육차이는 없었으며 단근처리묘에서 초장과 엽병장이 상대적으로 작았으나 전체적으로 지상부의 생육저하는 크지 않은 것으로 나타났다. 국소냉방 및 단근처리에 대한 화방출뢰율을 조사한 결과 정화방 출뢰율은 구입묘를 제외하고 단근처리묘와 비단근처리묘에서 모두 관부 국소냉방구, 근권부 국소냉방구, 대조구의 순서로 높게 나타났으며, 대조구, 근권부 국소난방구, 관부 국소난방구 모두에서 단근처리묘가 비단근처리묘에 비해 높게 나타났다. 정화방 출뢰율은 관부 국소난방구 단근처리묘가 가장 높았으며 가장 낮은 무처리 비단근처리묘 보다 시기별 최대 3.8배 높게 나타났다. 1차 액화방의 출뢰율은 처리구 간 차이가 정화방에 비해 크지 않으나 정화방과 동일한 경향을 나타내었다. 2018년 3월 27일까지의 상품과 수확량은 구입묘를 제외하고 관부 국소난방구, 근권부 국소난방구, 대조구의 순서로 나타났으며, 단근처리묘가 비단근처리묘보다 수확량이 높았다. 이러한 경향은 2018년 2월 14일까지의 정화방 중심의 초기수확량에서 뚜렷하게 나타났으며 2018년 3월 9일부터 국소냉방과 단근처리의 영향은 줄어드는 것으로 나타났다. 난방시험의 경우 근권부 국소난방구(근권 $20^{\circ}C$+공간 $5^{\circ}C$)와 관부 국소난방구(관부 $20^{\circ}C$+공간 $5^{\circ}C$)는 대조구(공간 $9^{\circ}C$) 대비 각각 59%와 65%의 난방유 절감이 가능하였으며, 히트펌프 가동에 의한 전기소비를 반영하였을 때 난방비는 각각 55%와 61%가 절감되는 것으로 분석되었다. 히트펌프와 배관을 이용한 촉성재배 '설향' 딸기의 관부 국소냉난방은 초기수확량 증가와 난방에너지절감 효과를 확인할 수 있었으나 화아분화 촉진에 의한 화방출뢰의 조진화는 정식시기, 환경조건, 초기생육이 미치는 영향이 크므로 이와 관련한 추가적인 연구가 필요한 것으로 판단되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.776-780
• /
• 2002

This paper describes the concept and the characteristics of hyper interfacial bonding developed as a new concept joining process for UFG (ultra-fine grained) steel. Hyper interfacial bonding process is characterized by instantaneous surface melting bonding which involves a series of steps, namely, surface heating by high frequency induction, the rapid removing of heating coil and joining by pressing specimens. UFG steels used in this study have the average grain size of 1.25 ${\mu}{\textrm}{m}$. The surface of specimen can be rapidly heated up and melted within 0.2s. Temperature gradient near heated surface is relatively steep, and peak temperature drastically fell down to about 1100K at the depth of 2~3mm away from the heated surface of specimen. Bainite is observed near bond interface, and also M-A (martensite-austenite) islands are observed in HAZ. Grain size increases with increasing heating power, however, the grain size in bonded zone can be restrained under 11 ${\mu}{\textrm}{m}$. Hardened zone is limited to near bond interface, and the maximum hardness is Hv350~Hv390.

• 한국정밀공학회지
• /
• 제32권12호
• /
• pp.1017-1021
• /
• 2015

Induction heating has been applied to the preheating process in various industrial fields. It has been used as a simple device structure, limiting the heating zone through controlled variables, and free-welding positions. It would be helpful to weld thick plates with arc welding such as GMAW. The induction heating process is well suited to this process. In this study, in order to find suitable induction heating parameters, a simulation was conducted with multi physics S/W. Three kinds of material were heated by induction coils designed specially for thick plate. Consequently, steel and nimonic alloy were the most efficient materials for preheating by induction. It can be concluded that the induction heating process is a good method for preheating the thick plate.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.762-768
• /
• 2011

We use floor radiant heating system in the house of commons in winter Floor radiant heating system, which transfer heat by radiation, is one of the energy efficient and comfortable systems that. Floor radiant heating system is configured to be controlled by the room for energy-saving. Proper flow rate to a comfortable heating in the room is important. However, Using a constant speed circulation pump in separate rooms, heating system may cause an imbalance because of the difference of length of coil when operating in the rooms. In this study, our Research team examined heating imbalance due to the variation length through the coil length changes and flow control of the circulation pump.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.442-447
• /
• 2006

This paper investigates the shadow amount of edifice and according to time zone used by its Electric heating appliances, it is analyzed that Electric Heating Power Load affects Heal power load variation curve. Also, in case that the far infrared ray heating system, which are used as new electric heating system, occupies some of the existing Electric heating appliances, it is analyzed that the Electric heating power load affects the Peak load power in Korea.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4156-4162
• /
• 2013

본 연구는 중형 크랭크샤프트 제작 과정에서 환봉을 가열하기 위한 최적의 유도가열조건을 결정하기 위한 것으로, 4가지 가열조건(가열코일 개수, 위치 등)에 대하여 수치해석적인 방법을 사용하여 전자기장 및 열전달해석을 순차적으로 수행하였다. 이러한 수치해석 결과로부터 일정시간 가열 후 크랭크샤프트 환봉 가열부에 발생하는 최고온도와 두께에 따른 내, 외부 최소 온도차를 평가하여 현장에 적용 가능한 가열코일의 위치 및 개수 등의 유도가열조건을 결정하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.66-68
• /
• 2004

Induction heating is a process that is accompanied with magnetic and thermal situation. When the high-frequency current flows in the coil, induced eddy current generates heat to conductor. To simulate an induction heating process, the finite element analysis program was developed. A coupling method between the magnetic and thermal routines was developed. In the process of magnetic analysis and thermal analysis, magnetic material properties and thermal material properties depending on temperature are taken into consideration. In this paper, to predict the angular deformation, temperature difference and the shape of heat affected zone were discussed. Also appropriate coil shape for maximum angular deformation were proposed.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.66-71
• /
• 2009

To reduce the building energy consumption, the major advanced nations are conducting actively many researches on so called a "self-sufficient building(or other words zero energy building)" which can support its required energy by itself. Given this background, KIER(Korea Institute of Energy Research) built full size test-bed of the zero energy solar house in early 2002, and has studied on the self-sufficient heating load up to now. We analyse the sensitivity between the heating load and the solar radiation gain according to the change the effective transmittance of windows. The authors classified 9 cases by solar transmittance of glass. The results demonstrate the solar radiation amount is 0.466 MWh from the eastern zone of Fl.,1(the first floor), 0.332 MWh from Fl.,2(the second floor), 1.194 MWh form the southern zone of F1., and 0.822 MWh from the southern zone of Fl.,2 on the case 1(each cases are classified by window types). On the case 9, the solar radiation amount is 3.127 MWh, 2.662 MWh, 8.799 MWh and 6.078 MWh from the same condition. For the Fl.,1, the amount of Heat Load that is saved per year ranged 10.5 to 48 %, and the reduction was anywhere from 0.2 to 17.9% for Fl.,2

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.62-69
• /
• 2009

To reduce the building energy consumption, the major advanced nations are conducting actively many researches on so called a "self-sufficient building(or other words zero energy building)" which can support its required energy by itself. Given this background, KIER(Korea Institute of Energy Research) built full size test-bed of the zero energy solar house in early 2001, and has studied on the self-sufficient heating load up to now. We analyse the sensitivity between the heating load and the solar radiation gain according to the change the effective transmittance of windows. The authors classified 9 cases by solar transmittance of glass. The results demonstrate the solar radiation amount is 0.466 MWh from the eastern zone of Fl.,1(the first floor), 0.332 MWh from Fl.,2(the second floor), 1.194 MWh form the southern zone of F1., and 0.822 MWh from the southern zone of Fl.,2 on the case 1(each cases are classified by window types). On the case 9, the solar radiation amount is 3.127 MWh, 2.662 MWh, 8.799 MWh and 6.078 MWh from the same condition. For the Fl.,1, the amount of Heat Load that is saved per year ranged 10.5 to 48%, and the reduction was anywhere from 0.2 to 17.9% for Fl.,2.

• 동력기계공학회지
• /
• 제8권2호
• /
• pp.24-30
• /
• 2004

In this paper, the optimal heating pattern of the furnace is sought to reduce the unnecessary energy loss. A finite difference method was used to estimate the transient temperature field of the billet in a furnace. Heat conduction equations were used in the interior nodes of the billet, while energy balances for conduction, convection, and radiation were considered in the boundary nodes. Several heating patterns for the furnace were tested and subsequently compared each other. The results showed that the temperature in the preheating zone should be set to relatively low. The temperature distributions of the billet are quite different from each other when different heating pattern are used, even though the heating patterns have the same amount of energy consumption. It reveals that there exists an optimal heating pattern to save the energy loss.