• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.94-102
• /
• 2003

본 논문은 고주파 전원에 사용되는 풀 브릿지 부하 병렬형 고주파 공진 인버터 회로를 연구대상으로 하고 출력제어기법으로는 펄스 주파수 변조(PFM, 펄스 폭 변조(PWM) 그리고 펄스 위상 변화(Phase-Shift)잎 경우를 비교 검토하였다. 회로의 해석은 정규화 파라메타를 도입하여 범용성 있게 기술하였고, 인버터 특성은 3가지 구동신호패턴에 의한 스위칭 주파수($\mu$), 펄스폭($\theta$d), Phase-Shift의 위상차각($\phi$)의 변화와 제 파라메타에 따라 특성 평가를 행하였다. 실험을 통해 이론해석의 타당성을 검증하였다. 향후, 3가지의 구동신호제어기법에 의한 특성들은 유도가열 응용, DC-DC 컨버터 등의 전원 시스템의 출력제어 시에 유용한 자료로 제공될 것으로 사료된다.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.767-773
• /
• 2017

Infrared stealth is an important technology for naval ships. This technology helps improve the anti-detection performance and survivability of naval ships. In general, the infrared signature of naval ships are categorized into internal and external heat source. External signature are generated by ship surface heating by solar flux as well as the complicated heat transfer process with the surrounding weather condition. Modern naval ships are equipped with seawater injection nozzles on the outside for nuclear, biological and, chemical, and these nozzles are used to control external signature. Wide nozzle placement intervals and insufficient injection pressure, however, have reduced seawater dispersion area. To address this problem, nozzle installation standards must be established. In this study, an actual-scale experimental system was implemented to provide the evidence for nozzle installation standards in order to reduce the infrared signature of naval ships. In addition, the environmental conditions of the experiment were set up through computational fluid dynamics considering the ocean climate data and naval ship management conditions of South Korea. The dispersion distance was measured using a high-resolution thermography system. The flow rate, pipe pressure, and dispersion distance were analyzed, and the evidence for the installation of seawater injection nozzles and operation performance standards was suggested.

• 한국가스학회지
• /
• 제18권5호
• /
• pp.33-39
• /
• 2014

열매체유는 화학플랜트의 가열시스템, 열교환시스템, 특정한 가스공정, 사출성형 시스템 및 펄프 제지공정에 사용되고 있다. 열매체유는 열적 산화 분해에 잘 견디며 안전성이 뛰어나며, 열매체유가 누출이나 분출의 경우에는 점화원이 있을때 쉽게 점화된다. 본 연구에서는 공정안전관리 사업장의 화재 폭발 사고를 예방하기 위해서 열매체유의 사용 실태조사를 통해 안전관리 상태를 고찰하였다. 사업장의 공정시스템에서 사용된 열매체유의 사용실태는 개발된 설문지에 의해서 조사되었다. 본 연구 결과는 열매체유의 관리나, 열매체유 공정의 안전한 운전과 유지와 관련된 화재 폭발 사고 예방을 위한 안전관리 대책 수립에 활용될 수 있을 것이다.

• 공업화학
• /
• 제23권2호
• /
• pp.125-130
• /
• 2012

현재 화석연료사용의 급증으로 인한 지구온난화와 자원고갈의 문제가 전세계적으로 크게 대두되어지고 있다. 이를 해결하기 위해 세계적으로 재생 가능한 바이오매스의 개발에 관심을 기울이고 있다. 바이오가스는 다양한 바이오매스로부터 생산된 기체상태의 연료로 전력생산 및 기존 난방용 연료와 자동차연료로 대체할 수 있는 친환경적 석유대체연료이다. 우리나라의 유기성폐기물은 발생량의 상당부분을 차지하는 음식물쓰레기와 가축분뇨는 매년 증가 추세에 있으며, 유기성폐기물에서 발생하는 가스는 60% 이상의 고농도 메탄을 함유하고 있다. 이를 에너지원으로 이용할 경우 에너지의 효율적 이용에 큰 효과를 기대할 수 있다. 본 논문에서는 국내 신재생에너지로서 바이오가스의 현황을 살펴보고자 한다.

• 한국지반공학회논문집
• /
• 제33권11호
• /
• pp.45-57
• /
• 2017

연약지반의 압밀거동은 온도변화에 의하여 영향을 받는다. 연약 점토지반 내에 온도가 증가하면 간극수압이 증가하고 간극수압의 소산은 부피와 간극비를 감소시킨다. 또한 높은 온도는 간극유체의 점성을 감소시키므로 압밀속도가 빨라진다. 본 연구에서는 온도가 압밀침하량, 압밀시간, 간극수압과 같은 압밀거동에 미치는 영향을 분석하였으며, 이를 위하여 수리역학적(HM) 및 열수리역학적(THM) 거동에 대한 수치해석을 수행하였다. 열주입과 샌드드레인을 동시에 고려하였으며, 온도 변화 및 샌드드레인 직경 변화를 고려하여 해석을 수행하였다. 해석결과, 시료내부의 온도는 열원의 온도와 샌드드레인의 직경 증가에 따라 증가하는 것으로 나타났다. 또한 열주입은 과잉간극수압을 증가시키고 그에 따라 과압밀 영역에서는 추가적인 침하량을 유발하고 정규압밀 영역에서는 압밀시간을 감소시키는 것으로 나타났다.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.1-9
• /
• 2021

With the convergence of the information and communication technologies, a new age of technological civilization has arrived. This is the age of intelligent revolution, known as the 4th industrial revolution. The 4th industrial revolution is based on technological innovations, such as robots, big data analysis, artificial intelligence, and unmanned transportation facilities. This revolution would interconnect all the people, things, and economy, and hence will lead to the expansion of the industry. A high-density, high-capacity energy technology is required to maintain this interconnection. As a next-generation energy source, lithium-ion batteries are in the spotlight today. However, lithium-ion batteries can cause thermal runaway and fire because of electrical, thermal, and mechanical abuse. In this study, thermal runaway was induced in 72.5 Ah NCM pouch-type lithium-ion batteries because of thermal abuse. The surface of the pouch-type lithium-ion batteries was heated by the hot plate heating method, and the effect of the rate of increase in the surface temperature on the thermal runaway trigger time was analyzed using Minitab 19, a statistical analysis program. The correlation analysis results confirmed that there existed a strong negative relationship between each variable, while the regression analysis demonstrated that the thermal runaway trigger time of lithium-ion batteries can be predicted from the rate of increase in their surface temperature.

• Journal of Ginseng Research
• /
• 제43권1호
• /
• pp.27-37
• /
• 2019

Background: The structural conversions in ginsenosides induced by steaming or heating or acidic condition could improve red ginseng bioactivities significantly. In this paper, the chemical transformations of red American ginseng from fresh Panax quinquefolium L. under steaming were investigated, and the possible mechanisms were discussed. Methods: A method with reversed-phase high-performance liquid chromatography coupled with linear ion trap mass spectrometry ($HPLC-MS^n$)-equipped electrospray ionization ion source was developed for structural analysis and quantitation of ginsenosides in dried and red American ginseng. Results: In total, 59 ginsenosides of protopanaxadiol, protopanaxatriol, oleanane, and ocotillol types were identified in American ginseng before and after steaming process by matching the molecular weight and/or comparing $MS^n$ fragmentation with that of standards and/or known published compounds, and some of them were determined to be disappeared or newly generated under different steaming time and temperature. The specific fragments of each aglycone-type ginsenosides were determined as well as aglycone hydrated and dehydrated ones. The mechanisms were deduced as hydrolysis, hydration, dehydration, and isomerization of neutral and acidic ginsenosides. Furthermore, the relative peak areas of detected compounds were calculated based on peak areas ratio. Conclusion: The multicomponent assessment of American ginseng was conducted by $HPLC-MS^n$. The result is expected to provide possibility for holistic evaluation of the processing procedures of red American ginseng and a scientific basis for the usage of American ginseng in prescription.

• 한국융합학회논문지
• /
• 제13권3호
• /
• pp.191-196
• /
• 2022

내연기관 자동차 히터는 연소과정 중에 발생하는 엔진 열을 이용하므로 열원이 추가로 필요치 않지만, 배터리로부터 동력원을 얻는 전기자동차용 히터는 별도의 전열 장치가 요구된다. 지금까지 개발된 전기차용 히터 중에서 냉매를 이용하는 고전압 히터는 효율이 높고 작동 온도 범위가 넓은 장점이 있다. 고전압 히터 내부의 냉각수 유로의 형상은 열교환 성능을 크게 좌우하므로 히터 개발 시 유로 설계는 기술적으로 매우 중요하다. 본 논문에서는 대칭형 서펜타인 유로를 갖는 7kW급 고전압 히터의 유로 형상 설계를 위해 고전압 열유동 시뮬레이션을 수행하였다. 해석결과로부터 입출구간 차압과 차온 및 유로에서의 유동 균일도를 계산하여 히터의 성능을 평가하였다. 도출된 대칭형 서펜타인 유로 설계안은 기존 평행 서펜타인 비해 차압은 높지만, 열교환 성능은 비등하며 저온부가 비교적 넓게 존재하여 제어 회로의 설치 공간으로 활용할 수 있다는 장점이 있다.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• 한국지열·수열에너지학회논문집
• /
• 제19권1호
• /
• pp.1-13
• /
• 2023

Many government in the world have conducted building energy performance certification program to reduce building energy consumption. In this study, a reference building and its HVAC system was modeled, and the energy load and consumption were estimated by the ECO2 program. The software is a simple building energy simulation program based on monthly calculated method. The building energy efficiency rating the the reference building was 1+ under baseline condition. The simulation results showed that the insulation performance slightly affected building energy load and consumption, but light density had a significant effect on them. The application of geothermal heat pumps gave improvement of building energy efficiency rating but it could not make it possible to get zero energy building(ZEB) certification. The ZEB 5 certification could be achieved by using photovoltaics, however getting better grade was difficult. The simulation results showed that the ZEB 4 certification, one grade higher than ZEB 5, could be attained by using more than one renewable energy source such as geothermal and solar energy in this study.