• 제목/요약/키워드: Heat-up time

검색결과 574건 처리시간 0.042초

Change of Fractured Rock Permeability due to Thermo-Mechanical Loading of a Deep Geological Repository for Nuclear Waste - a Study on a Candidate Site in Forsmark, Sweden

  • Min, Ki-Bok;Stephansson, Ove
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2009년도 학술논문요약집
    • /
    • pp.187-187
    • /
    • 2009
  • Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

  • PDF

공유결합으로 다공성 막에 고정화된 PLD에 의한 포스퍼티딕산 생산 (Phosphatidic Acid Production by PLD Covalently Immobilized on Porous Membrane)

  • 박진원
    • 청정기술
    • /
    • 제21권4호
    • /
    • pp.224-228
    • /
    • 2015
  • 포스포라이페이즈디를 공유결합을 통해서 초미세다공성막에 고정화하였다. 고정화는 폴리에틸렌이민, 글루타알데하이드, 포스포라이페이즈디를 순차적으로 처리함으로써 수행되었다. X선 광전자 분광기를 이용하여 고정화가 확인되었다. 포스퍼티딜콜린이 분산된 버퍼용액의 pH값을 시간에 따라 모니터링하여 고정화된 경우와 그렇지 않은 경우에 대해 촉매활성을 산출하였다. 속도상수는 폴리스타이렌나노입자에 고정화된 포스포라이페이즈디에서는 0.64 s-1, 다공성 셀룰로스아세테이트막에 고정화된 포스포라이페이즈디에서는 0.52 s-1, 그리고 고정화되지 않은 포스포라이페이즈디에서는 0.75 s-1의 결과가 도출되었다. 재사용에 대한 연구가 10차례까지 수행되었으며, 초기 사용시의 활성대비로 95%가 유지되었다. 열과 저장성에 대한 안정성도 고찰되었으며, 다공성막에 고정화된 포스포라이페이즈디의 경우에 활성손실이 가장 적은 것으로 관찰되었다. 이 연구결과들로부터, 포스퍼티딕산의 생산용 포스포라이페이즈디의 고정화에 대한 지지체로 다공성 막을 사용할 수 있음을 알 수 있다.

소형 SCR 시스템 내 유동 제어를 위한 Baffle의 구조 결정에 관한 수치해석적 연구 (Numerical Study on the Baffle Structure for Determining the Flow Characteristic in Small Scale SCR System)

  • 박미정;장혁상;하지수
    • 대한환경공학회지
    • /
    • 제32권9호
    • /
    • pp.862-869
    • /
    • 2010
  • 소형 SCR 시스템(처리용량 25,300 Sm3/hr, 내부용적 $2.4{\times}2.4{\times}3.1\;m^3$)의 촉매성능개선을 목적으로 배기가스 유동제어에 관한 수치 해석적 연구가 수행되었다. 유동제어를 위해 여러 형태의 배플이 제안되었으며 CFD 해석을 통해 최적의 배플형상을 결정하였다. 유동 균일화를 위해서 설치된 배플의 유무에 따라 본 연구의 SCR 시스템에서의 촉매층 전단 5 mm에서 유속에 대한 RMS(%) 값은 약 6.2%의 차이를 보였다. 수치해석에 의해 결정된 격자 형상의 배플에서 사용된 배플판의 두께범위가 0~8 mm에서는 RMS(%) 값의 변화가 없었으나 두께 10 mm가 되면 2.5% 가량 수치가 증가하여 유동에 영향을 주었다. 격자 형상의 배플은 원뿔대 형상, 믹서 형상 배플에 비해 상대적으로 높은 유동안정도를 나타내며 형상에 따라 RMS(%) 값은 10% 이상의 차이를 나타내었다.

이제마(李濟馬)와 장종정(張從正)의 학술사상(學術思想)에 대한 비교(比較) 연구(硏究) (A Comparative Study on the Theory of Lee jaema and Chang ts' ungcheng)

  • 최의권;김경요
    • 사상체질의학회지
    • /
    • 제8권2호
    • /
    • pp.41-68
    • /
    • 1996
  • This thesis is a try for examining the historical characteristics of Constiutional medicine. For this purpose, I have examined their theory, and made a comparison carefully. Through this study, I have obtained several results as following. Both Chang and Lee lived in the time of change, which was unstable and uncertain. Under the condition, they both rejected following the existing trends of learned circles, and developed new thoughts and clinical techniques. They rejected superstitious beliefs and fatalism, and conducted the pursuit of experimental knowledge and rationale idea. Clinical experience was the very base of their study. They both criticized the bad habits of abuse of tonifing medication and health seeking. Especially Lee regarded control of emotion and regulation of a way of life as the best way for preservation of one's health. Chang regarded pathogenic factors as the ultimate factor of diseases, and strived for eliminating pathogenic factors, but L brought to a conclusion that the final factor of diseases was what is called "heart" itself, and emotional changes were the most essential causes of disease. It can be said that the pathogenesis insisted by Chang can be called The insistence that pathologic factors are the very etiology of all the disease (邪氣致病論), or all the diseases result from pathologic factors. And his whole remedy can be summarized as following, A study on the method of eliminating pathogenic factors. But the purpose of Constitutional medicine is to correct imbalance intrinsic to one's internal organs. In this aspect, Constitutional medicine is a "regulatory medicine". Depending on the classification of six vital substances, Chang classified all disease into six categories. These were based on symptoms and sings represented. While classification of diseases made by Lee was likely to rely upon constitutional characteristics. Chang thought that the three remedies made up of perspiration, purgation, vomiting were the most efficient way of eliminating pathogenic factors. Lee, however, thought those weren't methods of eliminating pathogenic factors but the best ways restoring one's self-regulation power. Chang thought that all the febrile disease essentially has a tendency in properties to belong to "heat", but Lee pointed out that pathologic processes are variable in accordance with constitutional features. They both regarded pathogenesis of diabetes as fire. That is to say, fire is the most essential factor of diabetes. And there are many risk factors such as inappropriate foods, drugs, climate, etc., but Lee thought what is most important is heart. Putting all accounts together, medical characteristics of Chang are similar to those of T aiyinjen and Shaoyangjen, and have no relation to those of those of Shaoyinjen. Therefore we can conclude that Chang understood pathologic processes of disease of T aiyinjen and Shaoyangjen, whether he knew about constitutional features or not.

  • PDF

INNOVATIVE CONCEPT FOR AN ULTRA-SMALL NUCLEAR THERMAL ROCKET UTILIZING A NEW MODERATED REACTOR

  • NAM, SEUNG HYUN;VENNERI, PAOLO;KIM, YONGHEE;LEE, JEONG IK;CHANG, SOON HEUNG;JEONG, YONG HOON
    • Nuclear Engineering and Technology
    • /
    • 제47권6호
    • /
    • pp.678-699
    • /
    • 2015
  • Although the harsh space environment imposes many severe challenges to space pioneers, space exploration is a realistic and profitable goal for long-term humanity survival. One of the viable and promising options to overcome the harsh environment of space is nuclear propulsion. Particularly, the Nuclear Thermal Rocket (NTR) is a leading candidate for nearterm human missions to Mars and beyond due to its relatively high thrust and efficiency. Traditional NTR designs use typically high power reactors with fast or epithermal neutron spectrums to simplify core design and to maximize thrust. In parallel there are a series of new NTR designs with lower thrust and higher efficiency, designed to enhance mission versatility and safety through the use of redundant engines (when used in a clustered engine arrangement) for future commercialization. This paper proposes a new NTR design of the second design philosophy, Korea Advanced NUclear Thermal Engine Rocket (KANUTER), for future space applications. The KANUTER consists of an Extremely High Temperature Gas cooled Reactor (EHTGR) utilizing hydrogen propellant, a propulsion system, and an optional electricity generation system to provide propulsion as well as electricity generation. The innovatively small engine has the characteristics of high efficiency, being compact and lightweight, and bimodal capability. The notable characteristics result from the moderated EHTGR design, uniquely utilizing the integrated fuel element with an ultra heat-resistant carbide fuel, an efficient metal hydride moderator, protectively cooling channels and an individual pressure tube in an all-in-one package. The EHTGR can be bimodally operated in a propulsion mode of $100MW_{th}$ and an electricity generation mode of $100MW_{th}$, equipped with a dynamic energy conversion system. To investigate the design features of the new reactor and to estimate referential engine performance, a preliminary design study in terms of neutronics and thermohydraulics was carried out. The result indicates that the innovative design has great potential for high propellant efficiency and thrust-to-weight of engine ratio, compared with the existing NTR designs. However, the build-up of fission products in fuel has a significant impact on the bimodal operation of the moderated reactor such as xenon-induced dead time. This issue can be overcome by building in excess reactivity and control margin for the reactor design.

CBT-SL5, a Bacteriocin from Enterococcus faecalis, Suppresses the Expression of Interleukin-8 Induced by Propionibacterium acnes in Cultured Human Keratinocytes

  • Lee, Ye-Jin;Choi, Hye-Jeong;Kang, Tae-Wook;Kim, Hyung-Ok;Chun, Myung-Jun;Park, Young-Min
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권7호
    • /
    • pp.1308-1316
    • /
    • 2008
  • Propionibacterium acnes is known to playa pivotal role in the pathogenesis of acne vulgaris. CBT-SL5 is one of the antimicrobial peptides from Enterococcus faecalis SL5, and it has shown antimicrobial activity against P. acnes. The aim of this study was to investigate the anti-inflammatory effect of CBT-SL5 on the inflammation induced by P. acnes in cultured human keratinocyes. Cultured human keratinocytes derived from neonatal foreskin were treated with heat-killed P. acnes to induce inflammation, and then various concentrations of CBT-SL5 were added to the P. acnes-treated keratinocytes. The mRNA expression and protein secretion of interleukin (IL)-8, an inflammation marker, was analyzed by real-time reverse transcription polymerase chain reaction and enzyme-linked immunosorbent assay, respectively. We also analyzed the nuclear factor-kappa B (NF-$\kappaB$) p65 translocation by performing immunofluorescent staining. P. acnes treatment up regulated the IL-8 mRNA expression in the keratinocytes, and this was brought about through both toll-like receptor (TLR)2 and TLR4. At the concentrations of 10, 50, and 100 ng/ml, CBT-SL5 significantly down regulated the P. acnes-induced IL-8 mRNA expression and protein production (p<0.05). At 6 hand 12 h of the treatment, CBT-SL5 significantly suppressed the P. acnes-induced IL-8 mRNA expression. Secretion of IL-8 protein was significantly reduced at 24 h. The functional inhibitory activity of CBT-SL5 was shown by CBT-SL5 suppressing the P. acnes-induced NF-$\kappaB$ translocation from the cytoplasm to the nucleus. These results demonstrated that CBT-SL5 suppressed the P. acnes-induced IL-8 expression in keratinocytes. Therefore, CBT-SL5 may be a novel anti-inflammatory treatment for acne.

인공광을 이용한 접목표 활착촉진 시스템의 시작품 설계 - 활착촉진 시스템 내의 기온과 상대습도 분포에 미치는 기류속도의 효과 (Design of a Prototype System for Graft-Taking Enhancement of Grafted Seedlings Using Artificial Lighting - Effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system)

  • 김용현
    • Journal of Biosystems Engineering
    • /
    • 제25권3호
    • /
    • pp.213-220
    • /
    • 2000
  • Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.

  • PDF

유전체장벽방전 플라즈마 장치의 조작특성과 살균력 (Operational Properties and Microbial Inactivation Performance of Dielectric Barrier Discharge Plasma Treatment System)

  • 목철균;이태훈
    • 산업식품공학
    • /
    • 제15권4호
    • /
    • pp.398-403
    • /
    • 2011
  • 비열살균기술로서 저온플라즈마 활용 가능성을 탐색하고자 유전체장벽 방전 플라즈마(DBDP)생성장치를 제작하여 최적 플라즈마생성 조건을 도출하고 Staphyloocus aureus를 대상으로 살균성능을 조사하였다. DBDP생성장치는 전력공급장치, 변압기, 전극, 시료처리부 등 네 부분으로 구성하였다. 인가전압은 단상 200 V AC를 사용하고, 변압기를 통하여 10.0-50.0 kV로 변환하고 10.0-50.0 kHz의 주파수의 펄스 구형파를 유전체인 세라믹 블록 내에 장치한 전극에 투입함으로써 상압에서 플라즈마를 생성하였다. 주파수를 올림에 따라 높은 전류가 유입되었고, 이에 비례하여 전력소비량이 증가하였다. 전류세기 1.0-2.0 A, 주파수32.0-35.3 kHz 범위에서 균일하고 안정적인 플라즈마 발생이 이루어졌으며 시료를 투입하지 않은 상태에서의 최적 전극간격은 1.85 mm 이었다. 전극간격을 높임에 따라 소비전력이 증가하였으나 시료 처리에 적합한 전극간격은 2.65 mm였다. DBDP 처리에 의한 온도상승은 최대 20$^{\circ}C$에 불과하여 열에 의한 생물학적 효과는 무시할 수 있었으며 따라서 비열기술임이 확인되었다. Staphyloocus aureus를 대상으로 DBDP 처리할 경우 초기 5분 동안은 살균치가 직선적인 증가를 보이다가 이후 다소 완만해지는 경향을 보였으며 1.25 A에서 10분간 처리 시 살균치는 5.0을 상회하였다.

Long-term and multidisciplinary research networks on biodiversity and terrestrial ecosystems: findings and insights from Takayama super-site, central Japan

  • Hiroyuki Muraoka;Taku M. Saitoh;Shohei Murayama
    • Journal of Ecology and Environment
    • /
    • 제47권4호
    • /
    • pp.228-240
    • /
    • 2023
  • Growing complexity in ecosystem structure and functions, under impacts of climate and land-use changes, requires interdisciplinary understandings of processes and the whole-system, and accurate estimates of the changing functions. In the last three decades, observation networks for biodiversity, ecosystems, and ecosystem functions under climate change, have been developed by interested scientists, research institutions and universities. In this paper we will review (1) the development and on-going activities of those observation networks, (2) some outcomes from forest carbon cycle studies at our super-site "Takayama site" in Japan, and (3) a few ideas how we connect in-situ and satellite observations as well as fill observation gaps in the Asia-Oceania region. There have been many intensive research and networking efforts to promote investigations for ecosystem change and functions (e.g., Long-Term Ecological Research Network), measurements of greenhouse gas, heat, and water fluxes (flux network), and biodiversity from genetic to ecosystem level (Biodiversity Observation Network). Combining those in-situ field research data with modeling analysis and satellite remote sensing allows the research communities to up-scale spatially from local to global, and temporally from the past to future. These observation networks oftern use different methodologies and target different scientific disciplines. However growing needs for comprehensive observations to understand the response of biodiversity and ecosystem functions to climate and societal changes at local, national, regional, and global scales are providing opportunities and expectations to network these networks. Among the challenges to produce and share integrated knowledge on climate, ecosystem functions and biodiversity, filling scale-gaps in space and time among the phenomena is crucial. To showcase such efforts, interdisciplinary research at 'Takayama super-site' was reviewed by focusing on studies on forest carbon cycle and phenology. A key approach to respond to multidisciplinary questions is to integrate in-situ field research, ecosystem modeling, and satellite remote sensing by developing cross-scale methodologies at long-term observation field sites called "super-sites". The research approach at 'Takayama site' in Japan showcases this response to the needs of multidisciplinary questions and further development of terrestrial ecosystem research to address environmental change issues from local to national, regional and global scales.

음식물쓰레기 퇴비화시설의 설치 및 운영 현황분석 및 개선방안 (Analysis and Improvement Measures on the Status of the Installation and Operation of Facilities for Recycling Food Waste into Compost)

  • 류지영;공규식;신대윤;배재근
    • 유기물자원화
    • /
    • 제12권3호
    • /
    • pp.95-111
    • /
    • 2004
  • 본 연구는 우리나라에 설치된 공공자원화시설 중에서 일처리용량이 0.5톤 이상인 자원화시설 중 가장 많은 분포를 보이는 퇴비화시설을 중심으로 설치 및 운영상황에 대하여 정밀진단하고 개선방안을 도출하기 위하여 수행되었다. 음식물쓰레기의 반입량을 월평균 및 년 평균값으로 조사한 결과, 월 평균값이 1,101.7톤/일, 년평균값이 930.9톤/일으로 평균계획용량 1,270.9톤/일에 상당량 미달되는 것으로 나타났다. 퇴비화시설의 입지조건도 공장등록이 불가능한 지역에 위치하여 허가를 득하지 못한 경우가 많았다. 퇴비화시설의 가동정지되는 주된 고장원인 기기는 발효시설과 파쇄시설로 나타났으며, 금속류 이물질유입은 파쇄시설의 고장이 주된 원인으로서 고장 및 부식에 대비한 설계가 요구된다. 초기함수율은 50~60%의 수분함량을 지키고 있는 것을 확인 되었으나, 톱밥, 음식물쓰레기, 반송퇴비가 적정하게 혼합되어 초기조건을 만족시킬 필요성이 있는 것으로 조사되었다. 발효시설의 체류시간은 부숙시설 15일, 후부숙조는 21일로서 최소기준이 설정되어 있으나, 일부 시설이 조건을 만족시키지 못하고 있는 것으로부터 시설의 종류에 따라서는 분해에 더 많은 시간이 소요됨으로 시설의 특징을 초기에 잘 파악하여 체류시간을 결정할 필요성이 있다. 퇴비화에 있어서 미생물 산화열에 의하여 발효조가 운영되어 경제성이 확보되어야 하나, 조사에 응한 25개소 중에서 14개소가 발효조에 어떠한 형태이던지 가온을 하고 있는 것으로 조사되었다. 이들 가온 시설은 역으로 미생물의 성장을 억제하여 퇴비화반응을 저해될 수 있는 것으로부터, 퇴비화에 있어서 미생물산화열을 이용하여 가능한 수분을 증발시키는 것을 기본으로 설계되어야 한다. 퇴비의 생산량을 발효조에 투입되는 음식물쓰레기와 부재료의 1일 평균 투입량이 22.8톤이었으며 퇴비로 생산된 량은 7.3톤/일로서 감량율이 68%를 보였다. 생산된 퇴비의 성상을 색상, 분해열의 잔류여부, 냄새 등으로 양질의 여부를 판단한 결과, 퇴비화 시설의 50% 정도는 퇴비화공정이 적정 설치, 운영이 되지 못했다는 것이 밝혀졌다. 생산된 퇴비가 토양에 건전한 형태로 제조되어야 할 것이다.

  • PDF