• 한국응용곤충학회지
• /
• 제60권2호
• /
• pp.193-199
• /
• 2021

벌목 개미과의 일본열마디개미는 국내 토착종이다. 지금까지 야외에서 이 종의 월동기작을 이해하기 위한 내한성 연구는 진행되지 않았다. 저온에서 다양한 온도별 노출시간에 따른 발육태별 저온 저항성을 조사하였다. 성충인 일개미가 다른 발육태와 비교하여 5℃와 10℃의 저온에서 높은 생존율을 보였으며, 급속내한성 유기 조건인 15℃에서 12시간 노출 후 내한성을 획득하였다. 급속내한성 유기는 10℃에서 최대 44%까지 생존율이 향상되었으며, 체내과냉각점과 체내빙점은 각각 -10.0℃에서 -14.2℃, -11.3℃에서 -15.3℃까지 낮아졌다. 저온처리는 저온 또는 스트레스 관련 유전자인 글리세롤 인산화효소와 열충격 단백질의 발현을 증가시켰다. 이상의 결과는 일본열마디개미의 내한성이 급속내한성 유기에 의해 야기된다는 것을 의미한다.

• Journal of Applied Biological Chemistry
• /
• 제51권3호
• /
• pp.95-101
• /
• 2008

The gene encoding a putative esterase of Xanthomonas oryzae pv. oryzae was cloned using PCR technique. The gene was expressed with His6 tag in E. coli. One-step purification of the recombinant esterase with Ni-NTA resin resulted in one band by SDS-PAGE analysis. The purified enzyme showed a molecular weight of 30 kDa, as expected, therefore the enzyme was a mononer. The enzyme was the most active toward p-nitrophenyl (p-NP) acetate and p-NP-butyrate to a lesser extent. However, the enzyme could not hydrolyze p-NP-myristate, palmitate, and stearate. Therefore, the enzyme is considered as an esterase, very different from lipase. The purified esterase had optimal pH at around 8.0 and was stable in a broad range of pH values. The optimal temperature ranged from 30 to $40^{\circ}C$, and the residual activity observed after heat treatment at $55^{\circ}C$ for 20 min was 72 % of the initial activity. The activity was inhibited by the presence of copper and cobalt ions.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.472-476
• /
• 1994

질산납으로부터 침전법으로 제조된 PbO-전구체의 상변태를 열분석, X-선 회절, 적외선 흡수 및 Raman분광 분석 등을 통하여 조사하였다. 질산납 수용액으로부터 $45^{\circ}C$, pH 9.0의 반응조건에서 PhO-전구체를 제조하였다. 침전물은 hydrous lead oxynitrate와 lead hydroxynitrate의 혼합체이었다. $560^{\circ}C$까지 열처리온도가 증가함에 따라 전구체는 $3Pb(NO_{3})_{2}$ㆍ7PbO를 거쳐 $Pb(NO_{3})_{2}$ㆍ5PbO로 된 후에 PbO(litharge)로 변화되었으며, $560^{\circ}C$이상에서 최종적으로 massicot형의 PbO로 변태되었다.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.58-66
• /
• 2010

The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.

• 공업화학
• /
• 제9권2호
• /
• pp.214-219
• /
• 1998

초음파분무 열분해에 의하여 유리 기판 위에 투명전도성 산화주석막을 증착하였다. 증착변수가 산화주석막의 전기저항, 광투과도, 결정구조 및 두께에 미치는 영향을 조사하였다. 증착시간과 염화주석(IV)의 농도가 증가함에 따라, 증착된 산화주석막의 전기저항과 가시선 및 근적외선 영역에서의 광투과도가 감소함을 보여주었다. 공기중에서 열처리온도가 증가하면, 증착된 산화주석막은 전기저항과 광투과도가 증가함을 나타냈다. 본 연구결과는 초음파분무열분해가 단일과정으로서 양질의 투명전도막을 효율적으로 제조할 수 있는 유망한 증착기술임을 암시한다.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.332-339
• /
• 2010

The lipase from Mucor racemosus NRRL 3631 was partially purified by fractional precipitation using 60% ammonium sulfate, which resulted in a 8.33-fold purification. The partially purified lipase was then immobilized using different immobilization techniques: physical adsorption, ionic binding, and entrapment. Entrapment in a 4% agar proved to be the most suitable technique (82% yield), as the immobilized lipase was more stable at acidic and alkaline pHs than the free enzyme, plus 100% of the original activity was retained owing to the thermal stability of the immobilized enzyme after heat treatment for 60 min at $45^{\circ}C$. The calculated half-lives (472.5, 433.12, and 268.5 min at 50, 55, and $60^{\circ}C$, respectively) and the activation energy (9.85 kcal/mol) for the immobilized enzyme were higher than those for the free enzyme. Under the selected conditions, the immobilized enzyme had a higher $K_m$ (11.11 mM) and lower $V_{max}$ (105.26 U/mg protein) when compared with the free enzyme (8.33 mM and 125.0 U/mg protein, respectively). The operational stability of the biocatalyst was tested for both the hydrolysis of triglycerides and esterification of fatty acids with glycerol. After 4 cycles, the immobilized lipase retained approximately 50% and 80% of its original activity in the hydrolysis and esterification reactions, respectively.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.550-556
• /
• 2006

Photosensitive carbon nanotube (CNT) pastes are explored to develop a CNT field emitter for field emission display (FED) application. We formulated a photosensitive paste including multi-walled CNTs (MWNTs) for screen printing. The photosensitive CNT paste was synthesized by mixing of MWNTs, inorganic fillers (nano metal), organic vehicle, monomers and photo initiator. The CNT paste films were patterned by using backside exposure technique. The CNTs were strongly fixed on a cathode by formation of carbon residue during firing process. For the CNT emitters, current-voltage(I-V) characteristics and images of field emission were evaluated. The emission properties of CNT emitters are dependent on the paste composition. A turn-on electric field for the CNT field emitters is measured to be 1 V/$\mu$m. Additionally, the effect of heat treatment parameter on field emission properties was discussed. The newly formulated photosensitive CNT paste can be potentially applicable to highly reliable CNT field emitters.

• Carbon letters
• /
• 제5권4호
• /
• pp.159-163
• /
• 2004

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-$CH_2$ and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to $1450^{\circ}C$, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2597-2602
• /
• 2000

The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

• 품질경영학회지
• /
• 제45권3호
• /
• pp.365-377
• /
• 2017

Purpose: In the A rotorcraft, the division of a long yaw control rod was studied to improve the heat treatment capability. The purpose of this study was to analyze whether division of yaw control rod affects quality reliability in the A rotorcraft and analyze whether it secured flight safety. Methods: The structural static test and the vibration durability test on the split shape of yaw control rod were carried out in order to examine and verify the existing structural analysis results. Results: Structural static test results showed that there were no cracks and vibration durability test results showed that there was no damage or breakage on the split yaw control rod. Conclusion: This study showed that the quality reliability was confirmed and thus the flight safety of the A rotorcraft was secured. And it is expected that the split technique of the yaw control rod will contribute to the development of the rotorcraft industry in the future.