• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.52.4-52.4
• /
• 2004

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1993년도 추계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.37-37
• /
• 1993

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1991년도 제2차 학술발표초록집
• /
• pp.15-16
• /
• 1991

• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.28-38
• /
• 2010

High temperature high cycle and low cycle fatigue deformation behavior of automotive heat resistant aluminum alloys (A356 and A319 based) were investigated in this study. The microstructures of both alloys were composed of primary Al-Si dendrite and eutectic Si phase. However, the size and distribution for eutectic Si phase varied: a coarse and inhomogeneous distributed was observed in alloy B (A319 based). A brittle intermethallic phase of ${\alpha}-Fe\;Al_{12}(Fe,Mn)_3Si_2$ was detected only in B alloy. Alloy B exhibited high fatigue life only under a high stress amplitued condition in the high cycle fatigue results, whereas alloy A showed high fatigue life when stress was lowered. With regard to the low-cycle fatigue result ($250^{\circ}C$) showing higher fatigue life as ductility increased, alloy A demonstrated higher fatigue life under all of the strain amplitude conditions. Fractographic observations showed that large porosities and pores near the outside surface could be the main factor in the formation of fatigue cracks. In alloy B. micro-cracks were formed in both the brittle intermetallic and coarse Si phasese. These micro-cracks then coalesced together and provided a path for fatigue crack propagation. From the observation of the differences in microstructure and fractography of these two automotive alloys, the authors attempt to explain the high-temperature fatigue deformation behavior of heat resistant aluminum alloys.

• Tribology and Lubricants
• /
• 제30권1호
• /
• pp.29-35
• /
• 2014

The temperature-dependent tribological properties of brake discs for a train were examined in this study. The discs were produced using heat-resistant alloy steel, which showed different thermal conductivity after the heat treatments. A commercial brake friction material was used to evaluate the friction effectiveness, and the friction tests were carried out using a 1/5 scale dynamometer under various initial braking temperature conditions. The results showed that the tribological property of the disc was strongly affected by the heat treatment schedule. At low temperatures (below $250^{\circ}C$), the friction coefficient increased as a function of disc temperature, indicating that frictional heat increased the adhesion between the disc and pad. In addition, fade was observed at high temperatures (above $250^{\circ}C$); it was pronounced in the case of the disc with low thermal conductivity. The different fade resistances observed in the discs with different heat treatment schedules appear to be influenced by microstructural changes such as carbide redistribution occurring during the heat treatments, which affected the thermal conductivity.

• Archives of Pharmacal Research
• /
• 제21권1호
• /
• pp.46-53
• /
• 1998

When NIH3T3 cells were exposed to mild heat and recovered at $37^{\circ}C$ for various time intervals, they were thermotolerant and resistant to subsequent stresses including heat, oxidative stresses, and antitumor drug methotrexate which are apoptotic inducers. The induction kinetics of apoptosis by stresses were determined by DNA fragmentation and protein synthesis using $[35^S]$methionine pulse labeling. We investigated the hypothesis that thermotolerant cells were resistant to apoptotic cell death compared to control cells when both cells were exposed to various stresses inducing apoptosis. The cellular changes in thermotolerant cells were examined to determine which components are involved in this resistance. At first, the degree of resistance correlates with the extent of heat shock protein synthesis which were varied depending on the heating times at $45^{\circ}C$ and recovery times at $37^{\circ}C$after heat shock. Secondly, membrane permeability change was observed in thermotolerant cells. When cells prelabeled with $[^{3}H]$thymidine were exposed to various amounts of heat and recovered at $37^{\circ}C$ for 1/2 to 24 h, the permeability of cytosolic $[^{3}H]$thymidine in thermotolerant cells was 4 fold higher than that in control cells. Thirdly, the protein synthesis rates in thermotolerant and control cells were measured after exposing the cells to the same extent of stress. It turned out that thermotolerant cells were less damaged to same amount of stress than control cells, although the recovery rates are very similar to each other. These results demonstrate that an increase of heat shock proteins and membrane changes in thermotolerant cells may protect the cells from the stresses and increase the resistance to apoptotic cell death, even though the exact mechanism should be further studied.

• 공업화학
• /
• 제20권4호
• /
• pp.416-422
• /
• 2009

강구조 건축물은 화재시 화염을 차단하기 위한 목적으로 내화재료를 사용하고 있다. 일반적으로 모든 건축 구조용 재료는 시간이 경과할수록 초기의 성능이 열화되기 때문에 이들의 유지관리가 필요하다. 내화 피복재는 건축물의 화재에 대한 내구성능은 내화피복재에 의존하기 때문에 건축물에서 매우 중요한 재료라 할 수 있다. 본 연구에서는 내화피복재로서의 알칼리 규산염의 합성 및 합성한 알칼리 규산염의 물성에 대해 연구하였는데, 알칼리 규산염의 종류로는 potassium silicate, sodium silicate, lithium silicate으로 하였으며, 기본적으로 몰 비율의 변화를 주어 합성하였다. 합성한 알칼리 규산염의 내화특성을 확인하기 위하여 용해도 포비도, 열 분석, 결정학적 분석, 차열성능 및 차염성능에 대해 시험하였다. 연구결과, 합성한 알칼리 규산염의 용해도, 포비도는 칼륨 실리케이트, 소디움 실리케이트, 리튬실리케이트의 순서로 나타났으며, 열분석에 의한 무게 손실은 소디움 실리케이트와 리튬 실리케이트가 칼륨 실리케이트 보다 큰 것으로 나타났다. 또한 화재 시 가장 중요한 차열성능과 차염성능에 대해KS 기준을 만족하는 것은 소디움 실리케이트 3.3 몰 배합으로 나타났는데, 내화피복재로서 우수한 성능을 발휘하였다.

• 한국환경보건학회지
• /
• 제22권4호
• /
• pp.109-121
• /
• 1996

It was intended to investigate the effect of the microbiological kitchen hygiene such as dishclothes and scrubbers. The 8indicator organisms (standard plate counts, coliform, heterotroph, enterococcus, staphylococcus, heat-stable bacteria, psychrotroph, Pseudomonas aeruginosa) were detected highly in dishwaters, dishcloth and scrubber. Coliform and Staphylococcus aureus were appeared on dishcloth dominantly than the scrubber, and the scrubbers were intruded by hetrotrophs and psychrotrophs numerously than dishclothes. The germ-resistant sponge inhibited the growth of the most of test strain, and appeared the about 100% reduction rate after 24 hr, but did not affect Pseudomonas aeruginosa and P. fragi so typically after 24 hr. The anti-microorganism durability of germ-resistant sponge, treated with food soil, was maintained by 10 days, the early stage strain density was founded in 20 days, and the strains grew after 30 days.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권1호
• /
• pp.8-12
• /
• 2000

The properties variation by deterioration of the 600V grade heat-resistant polyvinyl chloride insulated wire(HIV) was analyzed. The weight variation of the thermal deteriorated HIV was about 42% at 80$0^{\circ}C$ and over. From the analysis result of the metallurgical microscope photographs it shows that the sorface of normal wire showed the elongated structures. However the elongated structures did not appear at $900^{\circ} and over and we could observe that particles were grown. The grown oxidized substances in the thermally deteriorated electric wire were observed by SEM. The CuL, CuK, $CuK_b$, OK and CIK spectra of the thermally deteriorated HIV at $300^{\circ}C$ were uniform regardless of the scanning length, but the spectra of CIK could not found at above $700^{\circ}. At the DTA analysis, the endothermic reactions were occurred around $3006{\circ}C\; and\; 400^{\circ}C$ and the exothermic reactions were occurred around $470^{\circ}, respectively.

• Applied Biological Chemistry
• /
• 제40권6호
• /
• pp.508-513
• /
• 1997

고아밀로오스 옥수수전분인 Hylon V와 Hylon VII을 사용하여 수분-열처리 및 노화하고 효소저항 전분을 분리하여 열적 특성 및 입자 형태를 각각 DSC와 현미경으로 조사하였다. 처리 후 효소저항 전분의 수율은 두 전분이 비슷한 경향으로 증가하였으나 아밀로오스 함량이 높은 Hylon VII이 Hylon V보다 더 높았다. 특히 수분-열처리에 의해 효소저항성이 크게 증가되어 생전분과 수분-열처리 전분의 효소저항 전분 수율은 Hylon V의 경우는 11.4%에서 26.6%로, Hylon VII의 경우는 15.9%에서 32.8%로 증가하였으나 노화전분은 생전분보다 약간 증가하였다. DSC에 의하면 수분-열처리로 호화온도가 증가되고 엔탈피가 감소하나, 노화된 전분은 $140^{\circ}C$ 근처에서 피크를 보였다. 생전분과 수분-열처리 전분에서 분리한 효소저항 전분은 폭넓은 곡선을 나타낸 반면, 노화전분에서 분리한 효소저항 전분은 $150^{\circ}C$ 근처에서 날카로운 피크를 나타냈다. 수분-열처리에 의해 전분 입자의 형태나 복굴절은 그대로 유지되었으나 노화전분은 호화 중에 용출된 아밀로오스에 의해 입자들이 서로 엉켜 있었다. 수분-열처리 전분에서 분리된 효소저항 전분은 요드 염색으로 남색을 보여 생전분이나 노화전분에서 분리된 효소저항 전분보다 효소저항성이 큼을 알 수 있었다.