• Journal of Welding and Joining
• /
• v.33 no.1
• /
• pp.80-86
• /
• 2015

The purpose of this study is to establish the predictive method of the angular distortion caused by the line heating process with high frequency induction heating. In order to do it, the heat input model for the high frequency induction heating system was established through comparing the temperature evaluation results obtained by both FEA and experiment. The critical heating conditions to prevent the degradation of the work piece with various thicknesses were identified by FEA and microstructure test results. Under the critical heating conditions, the extensive line heating tests were performed. According to the test results, it was found that the angular distortion behavior of the heated plates could be defined as the function of heat intensity and the rigidity of heated plate. In addition, it was clarified that the angular distortion strongly depended on the size of test specimen such as the length and the width of the heated plate. Based on these results, the predictive equation for the angular distortion was established with the function of heat intensity, bending rigidity and size of heated plate.

• Journal of Ginseng Research
• /
• v.28 no.3
• /
• pp.136-142
• /
• 2004

During our investigations on the relationship between the browning reaction of ginseng root and two compounds (arginyl-fructosyl-glucose and arginyl-fructose) in the model system of steaming and heat-drying processes for the preparation of red ginseng, the preheating treatment of main roots of raw ginseng at 60∼70$^{\circ}C$ prior to the steaming and heat-drying processes was found to bring about the gelatinization of starch granules. The enzymatic hydrolysis of gelatinized starch to maltose, a marked formation of maltose, and the increase of both free arginine and total amino acids, resulting the acceleration of the Maillard type-browning reaction of ginseng root during the steaming and heat-drying processes, and the rise of brown color intensity of red ginseng. These results show that the preheating treatment may be effective for the decrease of inside white of red ginseng.

• Journal of Environmental Science International
• /
• v.28 no.10
• /
• pp.831-840
• /
• 2019

Recently, summer high temperature events caused by climate change and urban heat island phenomenon have become a serious social problem around the world. Urban areas have low albedo and huge heat storage, resulting in higher temperatures and longer lasting characteristics. To effectively consider the urban heat island measures, it is important to quantitatively grasp the impact of urban high temperatures on the society. Until now, the study of urban heat island phenomenon had been carried out focusing only on the effects of urban high temperature on human health (such as heat stroke and sleep disturbance). In this study, we focus on the effect of urban heat island phenomenon on air pollution. In particular, the relationship between high temperature phenomena in urban areas during summer and the concentration of photochemical oxidant is investigated. High concentrations of ozone during summer are confirmed to coincide with a day when the causative substances (NO2,VOCs) are high in urban areas during the early morning hours. Further, it is noted that the night urban heat island intensity is large.. Finally, although the concentration of other air pollutants has been decreasing in the long term, the concentration of photochemical oxidant gradually increases in Daegu.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.81-90
• /
• 2023

Climate change has resulted in increased frequency and intensity of heat waves, which poses a significant threat to the health and safety of construction workers, particularly those engaged in labor-intensive and heat-stress vulnerable working environments. To address this challenge, this study aimed to propose an interpretable machine learning approach for forecasting personal heat strain by considering the cumulative effect of heat exposure as a situational variable, which has not been taken into account in the existing approach. As a result, the proposed model, which incorporated the cumulative working time along with environmental and personal variables, was found to have superior forecast performance and explanatory power. Specifically, the proposed Multi-Layer Perceptron (MLP) model achieved a Mean Absolute Error (MAE) of 0.034 (℃) and an R-squared of 99.3% (0.933). Feature importance analysis revealed that the cumulative working time, as a situational variable, had the most significant impact on personal heat strain. These findings highlight the importance of systematic management of personal heat strain at construction sites by comprehensively considering the cumulative working time as a situational variable as well as environmental and personal variables. This study provided a valuable contribution to the construction industry by offering a reliable and accurate heat strain forecasting model, enhancing the health and safety of construction workers.

• Journal of the Korean earth science society
• /
• v.43 no.2
• /
• pp.253-264
• /
• 2022

The effect of decreased human activity on the urban heat island intensity (UHII) was analyzed using the observed temperature data of six sites (including one reference area) in Daejeon Metropolitan City from February to May of 2019 to 2021. Depending on the observation site, UHII decreased by approximately 20% in 2020 and 2021 compared to 2019 before COVID-19. The decrease in human activity increased UHII at night and decreased it during the daytime. Consequently, UHII diurnal amplitude increased by approximately 20% in 2020 and 2021 compared to 2019, irrespective of location. The decrease in UHII did not appear to be significantly correlated with natural factors such as wind speed and social distancing steps. In contrast, UHII was correlated with social distancing and significantly reduced air pollutants after COVID-19, with the most significant correlation observed for NO₂.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.4 no.4
• /
• pp.19-24
• /
• 2004

The thermal effect of a transparent insulated opake wall with solar energy was investigated theoretically. The heat gain through transparent insulated opake wall was studied for relative simple conditions. The stationary heat transport effect was studied for layer which is built on the opake wall. This study shows that a relative low solar radiation intensity causes a great heat reduction through the transparent insulated opake wall. Because the transparent insulation layer is mostly transparent to solar radiation, it is opaque to heat radiation.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.1061-1064
• /
• 1998

To examine the influence of unsteady wake on the flow and heat transfer characteristics, an experiment has been conducted in a four-vane linear cascade. Flow and heat transfer measurements are made for the inlet Reynolds number of 66000(based on chord length and free-stream velocity). Turbulent intensity and stress were measured using hot wire anemometer, and to measure the convective heat transfer coefficients on the blade surfaces liquid crystal/gold film Intrex technique was used. The disturbance by the unsteady wake is characterized by the unresolved unsteadiness. The unsteady wake enhances the turbulent motion of flow in the cascade passage. It also promotes the boundary layer development and transition. The results show that heat transfer coefficients on the suction surface increase with increasing unresolved unsteadiness.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.93-98
• /
• 2000

An experimental investigation on heat transfer characteristics of two-dimensional heated blocks using a confined impinging slot jet has been performed. At p/w=1, the effects of jet Reynolds number($Re=3900{\sim}12000$), dimensionless nozzle to block distance(H/B=1, 2, 4, 6) and nozzle type have been examined with five isothermally heated blocks. With the measurement of jet mean velocity and turbulence intensity distributions at nozzle exit, initially turbulent regimes, are classified. To clarify local heat transfer characteristics, naphthalene sublimation technique were used. The local and average heat transfer of heated blocks increase with the sharp-edged nozzle and increasing jet Reynolds number.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.2042-2052
• /
• 2003

An experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. The static pressure, the local flow temperature, and the wall temperature with decaying swirl were measured by using tangential inlet conditions and the friction factor and the local Nusselt number were calculated for Re=30000∼70000. The local Nusselt number was compared with that obtained from the Dittus-Boelter equation with swirl and without swirl. The results showed that the swirl enhances the heat transfer at the inlet and the outlet of the test tube.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.2 s.33
• /
• pp.213-229
• /
• 2007

Objective : This study investigated results of treatment of Atopic Dermatitis(AD) patients diagnosed as damp-heat type with herbal medicine and wet dreesing. Method : Six AD subjects diagnosed as damp-heat type were selected from the outpatient department of East-West Neo Medical Center in the period of Dec. 2006 to Feb. 2007. Each subject was treated with herbal medicine and wet dressing. Severity Scoring of Atopic Dermatitis(SCORAD) was used to evaluate the effect of treatment and pictures were taken of the Atopic dermatitis lesions. Result & Conclusion : We observed improvement on SCORAD score, especially intensity score of damp-heat type when they were treated with herbal medicine and wet dressing. However, it is less effective and AD often recurs in case of chronic adult-type AD. In addition, nipple eczema in some patients has showed a tendency to improve slowly and recur easily compared to other lesions.