• 항공우주기술
• /
• 제4권1호
• /
• pp.196-202
• /
• 2005

액체추진기관의 극저온 추진제 공급부에서 추진제의 주입 후 대기시간 동안의 온도상승은 배관내의 geysering 현상 및, 점화시 터보펌프에서의 cavitation을 발생시킬 수 있다. 본 자료에서는 이런 문제를 해결하는 방법 중 하나인 재순환배관 방식에 대하여 KSLV-I 예비안의 산화제부 형상을 바탕으로 LOX를 산화제로 사용한 경우에 있어서 그 성능을 파악하였다. 또한, 다양한 parametric study를 통하여 재순환배관의 설계인자를 찾고자 하였다. 재순환배관의 직경, 초기 LOX 온도, 재순환배관 높이, ullage 압력, 열전달 계수 등의 변화에 의한 영향 및 추가적인 He 분사를 통한 순환 촉진 효과를 살펴보았다. 상용 열유체해석프로그램인 SINDA/FLUINT를 사용하였고 1차원적으로 해석을 수행하였다.

• 한국자기학회지
• /
• 제13권1호
• /
• pp.41-46
• /
• 2003

본 연구에서는 높이와 길이의 비가 1:4인 장방형 케버티에서 바닥을 가열하고 좌우측 및 상부를 냉각할 경우 나타나는 베나드 유동을 다루었다. 자성유체는 미시적인 견지에서 자장의 영향에 의해 내부입자가 회전을 하고, 그 영향이 거시적인 열유동에 미치게 된다. 본 연구에서는 수치해석방법으로 비전도성 자성유체의 지배방정식계에 GSMAC algorithm을 적용하였다. 그 결과 베나드 유동은 외부자장의 방향 및 세기에 따라 제어할 수 있었고, H=-7000에서 임계점이 존재함을 알 수 있었다.

• 설비공학논문집
• /
• 제29권10호
• /
• pp.538-550
• /
• 2017

In a PWR (Pressurized Water Reactor), the appropriate heat removal from the surface of fuel rod bundle is important for ensuring thermal margins and safety. Although many CFD (Computational Fluid Dynamics) software have been used to predict complex flows inside fuel assemblies with mixing vanes, there is no domestic regulatory guideline for the comprehensive evaluation of CFD software. Therefore, from the nuclear regulatory perspective, it is necessary to perform the systematic assessment and prepare the domestic regulatory guideline for checking whether valid CFD software is used for nuclear safety problems. In this study, to provide systematic evaluation and guidance on the applicability of CFD software to the domestic nuclear safety area, the results of the sensitivity analysis for the effect of the discretization scheme accuracy for the convection terms and turbulence models, which are main factors that contribute to the uncertainty in the calculation of the nuclear safety problems, on the prediction performance for the turbulent flow distribution inside the fuel assembly with split-type mixing vanes were explained.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.388-397
• /
• 1999

Numerical simulations are carried out for the magnetic Czochralski single crystal growth system. It Is shown that a magnetic field significantly suppresses the convective flow and as the strength of magnetic field becomes to be stronger, the heat transfer in the melt is dominated by conduction rather than convection. By imposing a cusp magnetic field, the growth interface shape becomes convex toward the melt. When the axial magnetic field is imposed, there occurs an inversion of the interface shape with increase of the magnetic field strength. The oxygen concentration near the interface decreases with increasing cusp magnetic field strength while axial field causes an increase of an oxygen concentration at the central region and decrease of that at the edge of the crystal. The results show that the cusp magnetic field has advantages over an axial magnetic field In the radial uniformity of oxygen as well as in the additional degree of control.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.190-200
• /
• 1991

본 연구에서는 고온에 노출되는 열-점소성 거동의 해석을 위해 소성유동, 크 리프, 응력풀림(stress relaxation)등의 거동을 동시에 다룰 수 있는 통일구성방정식 모델에 대해 논하고 적절한 모델을 선정한다. 이 모델은 미소변형이론에 근거한 것 이므로 구조물의 거동을 소변형률(small strain)과 소회전(small rotation)의 범위내 로 가정하여 해석한다.선정된 모델에 대해서 시간변화율 형태의 방정식으로부터 유 한요소법을 통한 수치화와 사용된 구성방정식을 효율적으로 처리할 수 있는 수치해석 법상의 알고리듬을 제안한다. 제안된 알고리즘을 사용하여 유한요소법 전산코드를 적상하고, 작성된 코드를 이용하여 고온에서 하중을 받는 단순보와 국부적으로 심한 가열을 받는 구조물에 적용하여 고전적인 구성방정식으로 복합적인 해석이 어려웠던 열-점소성 거동을 효과적으로 해석할 수 있음을 보인다. 본 논문은 응력해석에 주안 점을 두었으므로 열해석에 관한 상세한 논의는 가급적 생략하기로 한다.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1772-1780
• /
• 2003

An optimal soot blowing system has been developed for an optimal operation of power utility boilers by both minimization of the use of steam and the number of soot blowers worked during soot blowing. Traditionally, the soot blowing system has been operated manually by operators. However, it causes the reduction of power and thermal performance degradation because all soot blowers installed in the plant should be worked simultaneously even there are lots of tubes those are not contaminated by slagging or fouling. Heat transfer area is divided into four groups, furnace, convection area including superheater, reheater and economizer, and air preheater in the present study. The condition of cleanness of the tubes is calculated by several parameters obtained by sensors. Then, a part of soot blowers works automatically where boiler tubes are contaminated. This system has been applied in a practical power plant. Therefore, comparison has been done between this system and manual operation and the results are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.847_848
• /
• 2009

This paper shows the temperature rise of the high voltage GIS bus bar. The temperature rise in GIS bus bar is due to Joule‘s losses in the conductor and the induced eddy current in the tank. The power losses of a bus bar calculated from the magnetic field analysis are used as the input data for the thermal analysis to predict the temperature. The required analysis is a couple-field Multiphysics that accounts for the interactions between three-dimensional AC harmonic magnetic and fluid fields. The heat transfer calculation using the fluid analysis is done by considering the natural convection and the radiation from the tank to the atmosphere. Consequently, because temperature distributions by couple-field Multiphysics (coupled magnetic-fluid) have good agreement with results of temperature rise test, the proposed couple-field Multiphysics technique is likely to be used in a conduction design of the single-pole and three pole-encapsulated bus bar in GIS..

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제4권1호
• /
• pp.121-131
• /
• 2000

Melt flow, heat and mass transfer of oxygen have been analyzed numerically in the process of Czochralski single crystal growth of silicon under the influence of misaligned cusp magnetic fields. Since the silicon melt in a crucible for crystal growth is of high temperature and of highly electrical-conducting, experimentation method has difficulty in analyzing the behavior of the melt flow. A set of simultaneous nonlinear equations including Navier-Stokes and Maxwell equations has been used for the modelling of the melt flow which can be regarded as a liquid metal. Together with the melt flow which forms the Marangoni convection, a flow circulation is observed near the comer close both to the crucible wall and the free surface. The melt flow tends to follow the magnetic lines instead of traversing the lines. These flow characteristics helps the flow circulation exist. Mass transfer characteristics influenced by the melt flow has been analyzed and the oxygen absorption rate to the crystal has been calculated and turned out to be rather uniform than in the case of an aligned magnetic field.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.67-76
• /
• 1995

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd: YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as BrJ, and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased. To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.176-177
• /
• 2006

Two kinds of alumina nanofluids are prepared by dispersing $Al_2O_3$ nanoparticles m transformer oil. The thermal conductivity of the nanoparticle-oil mixtures increases with particle volume fraction and thermal conductivity of the solid particle itself. The $Al_2O_3$ nanoparticles at a volume of 0.5% can increase the thermal conductivity of the transformer oil by 5.7%, and the overall heat transfer coefficient by 20%. From the natural convection test using a prototype transformer, the cooling effect of $Al_2O_3$-oil nanofluids on the heating element and oil itself is confirmed. However, excessive quantities of the surfactant have a harmful effect on viscosity, and thus it is strongly recommended to control the addition of the surfactant with great care.