• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.136-141
• /
• 2013

This study introduces and analyzes the energy for heating and cooling system in region with volcano-stratigraphic. The thermodynamic properties of air through the air blower installed at the entrance of borehole are measured. It estimates the availability of underground air for heating and cooling system through experimental data and theoretical analysis. Based on our conclusion from these calculations we predict possibility of over 40kW steady and stable energy source from underground. Therefore this underground air can be utilized in region with volcano-stratigraphic.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1812-1817
• /
• 2008

A cooling system for microelectronics is becoming more important as its surface heat density is projected to reach that of the sun surface. The existing technologies using natural and forced convection are limited to solve the problems. Recently, an electrohydrodynamic driven flow is studied as one of the means to cope with this problems. A new method, utilizing a needle-centered nozzle electrode, has been proposed and investigated. The I-V characteristics of the nozzle electrode for deionized water and silicone oil were significantly different from that of without liquid, which might be due to the liquid drop covered on the nozzle tip by the EHD force acting near the needle tip. Results showed that the liquid pumping rate and flow efficiency of the nozzle electrode were very high, especially for the silicone oil. Theoretical analysis also showed the effectiveness of the needle electrode centered in the ceramic nozzle, which, however, can be a means as a liquid pump.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.487-488
• /
• 2006

In these days, demand of a LCD monitor is remarkably increasing with development of the LCD technology. However, there are thermal problems for improvement of efficiency for the LCD monitor. Thus, this research analyzed thermal problems such as convection and conduction heat transfer characteristics in the LCD monitor using an infrared (IR) camera. Also, the results of the outer side of the front LCD panel using the IR camera have been compared with the results of the inner side of the front panel using T-type thermocouples. The equations have been derived for the temperature distribution of the inner side of the front LCD panel by a multiple regression method including variables for ambient temperature, humidity and temperature differences between the front and back panels of the LCD monitor.

• Journal of computational fluids engineering
• /
• v.7 no.4
• /
• pp.1-7
• /
• 2002

The phase-change transformation processes are relevant in many engineering applications. In particular, this phenomenon plays an important role in the extraction and fabrication operations in the metallurgical industry. The control of the heat transfer and fluid flow patterns is important to achieve casting quality and competitive production times. In the present study, a simple finite-element algorithm is developed for solid-liquid phase change problems. Natural convection in the liquid phase due to the temperature dependency of water density is considered by a numerical model. The predictions are compared with measurements by the particle image velocimetry(PIV). to show that the calculation results are in good agreement with the experiment results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.268-275
• /
• 2008

The prediction of hydrate pellet decomposition characteristics is required to design the regasification process of GTS (gas to solid) technology, which is considered as an economic alternative for LNG technology to transport natural gas produced from small and stranded gas wells. Mathematical model based on the conservation principles, the phase equilibrium relation, equation of gas state and phase change kinetics was set up and numerical solution procedure employing volume averaged fixed grid formulation and extended enthalpy method are implemented. Initially, porous methane hydrate pellet is at uniform temperature and pressure within hydrate stable region. The pressure starts to decrease with a fixed rate down to the final pressure and is kept constant afterwards while the bounding surface of pellet is heated by convection. The predicted convective heat and mass transfer accompanied by the decomposed gas flow through hydrate/ice solid matrix is reported focused on the comparison of spherical and cylindrical pellets having the same effective radius.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.171-177
• /
• 1984

균일하게 분포된 내부발열을 갖는 유체가 든 경사진(수평에서 45.deg.까지)정사각형 단면의 밀폐 공간 내에서의 2차원 자연대류 유동 및 열전달에 관한 수치적인 연구가 수행되었다. 4개 벽면온 도가 동일한 경계조건에서 내부발열로 인한 자연대류 유동이 Rayleigh수 1.5*$10^{5}$까지는 층 류유동 영역의 가정하에서 수치적으로 수렴되었다. 경사진 밀폐 공간에서의 유동형태 및 온도분 포는 수평인 경우에 비하여 윗쪽 벽면 근처에서 그 상이점이 많이 나타났다. 경사각도가 증가함 에 따라 평균 열전달율이 아랫쪽 벽과 오른쪽 벽에서 증가하였고 왼쪽 벽에서 감소하였으며 윗 쪽 벽에서는 거의 일정하였다.다.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.268-275
• /
• 2008

The prediction of hydrate pellet decomposition characteristics is required to design the regasification process of GTS (gas to solid) technology, which is considered as an economic alternative for LNG technology to transport natural gas produced from small and stranded gas wells. Mathematical model based on the conservation principles, the phase equilibrium relation, equation of gas state and phase change kinetics was set up and numerical solution procedure employing volume averaged fixed grid formulation and extended enthalpy method are implemented. Initially, porous methane hydrate pellet is at uniform temperature and pressure within hydrate stable region. The pressure starts to decrease with a fixed rate down to the final pressure and is kept constant afterwards while the bounding surface of pellet is heated by convection. The predicted convective heat and mass transfer accompanied by the decomposed gas flow through hydrate/ice solid matrix is reported focused on the comparison of spherical and cylindrical pellets having the same effective radius.

• Journal of Mechanical Science and Technology
• /
• v.18 no.2
• /
• pp.294-301
• /
• 2004

The natural convective heat transfer in a rectangular enclosure with a heating source has been studied by experiment and numerical analysis. The governing equations were solved by a finite volume method, a SIMPLE algorithm was adopted to solve a pressure term. The parameters for the numerical study are positions and surface temperatures of a heating source i.e., Y /H =0.25, 0.5, 0.75 and 11$^{\circ}C$ $\leq$ΔT$\leq$59$^{\circ}C$. The results of isotherms and velocity vectors have been represented, and the numerical results showed a good agreement with experimental values. Based on the numerical results, the mean Nusselt number of the rectangular enclosure wall could be expressed as a function of Grashof number.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.2039-2050
• /
• 1995

The nonlinear low-Reynolds-number k..epsilon. model of park and Sung is extended to predict the turbulent heat transports in separated and reattaching flows. The equations of the temperature variance( $k_{\theta}$ and its dissipation rate(.epsilon.$_{\theta}$ are solved, in concert with the equations of the turbulent kinetic energy(k) and its dissiation rate(.epsilon). In the present model, the near-wall effect and the non-equilibrium effect are fully taken into consideration. The validation of the model is then applied to the turbulent flow behind a backward-facing step and the flow over a blunt body. The predicted results of the present model are compared and evaluated with the relevant experiments.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.32-38
• /
• 2009

The effects of surface radiative properties on the radiant cooling of opaque surfaces under clear sky condition are studied. Two types of surfaces, one gray and the other selective, are compared. For the nighttime cooling, black surface gives the lowest plate temperature and on the other hand the ideal selective surface gives the highest temperature. The reverse is true when there is an insolation. Equivalent radiative heat transfer coefficient of radiant cooling without convection is about $1{\sim}7\;W/m^2-K$ for the range of values studied. The surface with black within the $6{\sim}13\;{\mu}m$ band else zero emissivity could be regarded as a black surface for the nighttime radiant cooling purposes. However, lower band limit of $4\;{\mu}m$ is preferred to $6\;{\mu}m$ for small insolation situations.