• 한국환경과학회지
• /
• 제27권9호
• /
• pp.763-770
• /
• 2018

Bioremediation in situ is heavily dependent on the oxygenic environment which would privide the dwelling microorganism with sufficient oxygen. The situation could be easily resolved with supply of an Oxygen Releasing Compound (ORC). In this paper we prepared that sort of material out of oyster shell powder (mostly calcium carbonate) that prevails every shore areas of the country. We used two different oxidizing methods in the first step of the whole manufacturing process-conventional heating in a furnace and an ultrasound generator to obtain calcium oxide. Then that calcium oxide was further oxidized into calcium peroxide which may release oxygen under a moisturized condition. The oxygen releasing experiments were run to test the performance of our products, and to determine the gas kinetics during the experiments. Interestingly, calcium peroxide derived from ultrasound treatment was much more energy-effective as ORC than that from furnace heating although the heat derived process was better than that of ultrasound in terms of oxygen content and its releasing rate. We also found that most of the data collected from the gas releasing experiments fairly supported an ordinary $1^{st}$ order kinetics to oxygen concentration, which shaped a sharp discharge of oxygen at the very early moment of each test.

• 한국수소및신에너지학회논문집
• /
• 제13권2호
• /
• pp.151-158
• /
• 2002

The hydorgen storage alloys were produced by melting in arc melting furnace and then solution heat treated at $1,100^{\circ}C$ followed by pulverization. The chemical analysis on the samples showed that the major elements of misch metal(Mm) were La, Ce, Pr and Nd with impurity less than 1wt.%. X-ray diffraction indicated that the structure for these samples were a single phase of hexagonal with $CaCu_5$ type. Compared to the initial particle size $100{\sim}110{\mu}m$, the many fine cracks were found and particle size decreased to $14{\mu}m$ for $MmNi_{4.5}Mn_{0.5}$ after hydriding/dehydring test run. To activate the sample the vessel filled with hydrogen storage alloys was first evacuated for for at $70^{\circ}C$ and then treated for 10.5hr under hydrogen pressure of 20atm for $MmNi_{4.5}Mn_{0.5}$ alloy. The experimental data showed that the hydrogen storage alloy of $MmNi_{4.5}Mn_{0.5}$ had superior adsorption and description properties within a temperature rang of $40^{\circ}C{\sim}80^{\circ}C$ and also they had a good P-C-T curve.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.437-451
• /
• 2019

Purpose: The purpose of this study is to improve the quality of the PGM system by improving the structure and production process of slip-ring rotary joint for radar. Methods: The improvement measures for each cause are established through failure analysis of broken items. Specifically, changing in the housing to improve the heating system. Changing the transportation method to prevent damage to equipment during transport. Changing work process of the attenuator ring to prevent damage. etc. Results: The results of this study are as follows; improving the heating system reduces heat generated by the attenuator by about 7 degrees and obtain additional temperature margins. Reduction of defect rate because of adding X-band rotary joint run-out measurement test, ESS of slip-ring rotary joint and Transportation improvement(reinforced flight boxes, tube protection, etc). Getting stable VSWR values by improving work process of attenuator overheating due to a bad bonding process. Conclusion: Through this study, improvements were made to slip-ring rotary joint that failed repeatedly for various reasons. As a result of the application of the improvements, the same fault does not occur until now, so we can see that the quality of PGM has improved.

• 농업과학연구
• /
• 제16권1호
• /
• pp.84-101
• /
• 1989

본(本) 연구(硏究)의 공시(供試) 곡물(穀物)로서 벼 6 품종(品種)(Japonica 3 품종(品種), Indica ${\times}$ Japonica 3 품종(品種)), 콩 2 품종(品種), 밀 2 품종(品種), 보리 2 품종(品種)을 택(澤)하였다. 함수율(含水率)은 약(約) 13%~27%(w.b.)까지 4 수준(水準)으로 변화(變化)시키면서 곡립(穀粒)의 크기, 표면적(表面積) 및 체적(體積)을 각(各) 품종(品種) 및 함수율(含水率) 각(各) 수준(水準)에서 10~15반부(反復)으로 측정(測定)하여 함수율(含水率) 변화(變化)가 이들에 미치는 영향(影響)을 분석(分析)하고, 곡립(穀粒)의 주요(主要) 치수와 체적(體積) 및 표면적(表面積)과의 상호관계(相互關係), 체적(體積)을 인자(因子)로 하는 표면적(表面積)의 예측식(豫測式)에 관(關)한 연구(硏究) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 본(本) 연구(硏究)에서 적용(適用)한 표면적(表面積) 및 체적(體積)의 측정(測定) 방법(方法)을 검정(檢定)하기 위(爲)하여 이론적(理論的)으로 계산(計算)이 가능(可能)한 0.0375m인 탁구(卓球)공으로 그 표면적(表面積)과 체적(體積)을 측정(測定)했던 결과, 회전각(回轉角) 증분(增分)을 $15^{\circ}$로 했을때 공식(公式)에 의한 계산치(計算値)와의 오차(誤差)가 각각(各各) 0.65% 및 0.77% 이었다. 2. 벼의 일반계(一般系)와 다수계(多收系) 사이와 콩, 밀의 품종간(品種間)에 본(本) 연구(硏究)에서 대상(對象)으로한 물리량(物理量)들에 대(對)하여 t-test한 결과(結果), 벼의 두 계통(系統)사이와 콩, 밀의 품종간(品種間)에는 5%의 유의수준(有意水準)에서 그 차이(差異)가 인정(認定)되었다. 3. 곡립(穀粒)의 길이, 폭, 두께는 함수율(含水率)의 증가(增加)에 따라 직선적(直線的)으로 증가(增加)하였으며, 길이와 두께의 비(比)(L/T)와 폭과 두께의 비(比)(W/T)는 벼의 모든 품종(品種)에서 함수율(含水率)의 증가(增加)에 따라 감소(減少)하는 반면(反面), 콩에서는 모두 증가(增加)했다. 그러나 밀, 보리에서는 품종(品種)에 따라 일률적(一律的)인 경향(傾向)이 나타나지 않았다. 4. 공시(供試) 곡립(穀粒)의 표면적(表面積)은 일반계(一般系) 벼 약(約) $45{\sim}51{\times}10^{-6}m^2$, 다수계(多收系) 벼 $42{\sim}47{\times}10^{-6}m^2$, 장엽콩 약(約) $188{\sim}200{\times}10^{-6}m^2$, 황금콩 약(約) $180{\sim}201{\times}10^{-6}m^2$, 대맥(大麥) 약(約) $60{\sim}69{\times}10^{-6}m^2$, 나맥(裸麥) 약(約) $47{\sim}60{\times}10^{-6}m^2$, 은파밀 약(約) $51{\sim}20{\times}10^{-6}m^2$, 그루밀은 약(約) $57{\sim}69{\times}10^{-6}m^2$ 이었으며, 체적(體積)은 일반계(一般系) 벼 약(約) $25{\sim}30{\times}10^{-9}m^3$ 다수계(多收系) 벼 약(約) $21{\sim}26{\times}10^{-9}m^3$, 장엽콩 약(約) $277{\sim}300{\times}10^{-9}m^3$, 황금콩 약(約) $190{\sim}253{\times}10^{-9}m^3$, 대맥(大麥) 약(約) $36{\sim}45{\times}10^{-9}m^3$, 나맥(裸麥) 약(約) $22{\sim}28{\times}10^{-9}m^3$, 은파일 약(約) $23{\sim}31{\times}10^{-9}m^3$, 그루밀 약(約) $27{\sim}34{\times}10^{-9}m^3$이었다. 5. 함수율(含水率)에 따른 표면적(表面積) 및 체적(體積)의 증가율(增加率)은 콩이 가장 컸고, 다음은 밀, 보리, 벼 순(順) 이였으며, 벼에서는 일반계(一般系) 벼가 다수계(多收系) 벼 보다 약간(若干) 높게 나타났다. 6. 함수율(含水率) 변화(變化)에 따른 곡립(穀粒)의 크기(결이, 폭, 두께), 표면적(表面積) 및 체적(體積)에 대한 1차(次) 회귀(回歸) 방정식(方程式), 곡립(穀粒)의 길이, 폭, 두께를 인자(因子)로 하는 표면적(表面積) 및 체적(體積)에 대한 지수(指數) 방정식(方程式)과 곡립(穀粒)의 체적(體積)을 인자(因子)로 하는 표면적(表面積)의 회귀(回歸) 방정식(方程式)을 공시(供試) 곡물(穀物) 및 품종별(品種別)로 각각(各各) 유도(誘導)하였다.