• 플랜트 저널
• /
• 제14권4호
• /
• pp.48-54
• /
• 2018

발전설비에서의 질소산화물 배출 규제치가 강화됨에 따라 1990년대에 설치된 HRSG도 탈질설비를 추가로 설치해야 하는 상황이 되었다. 그러나 HRSG 내부에 촉매와 암모니아 분사장치 모두를 설치할 수 있는 공간이 없기 때문에 그 대안으로써 HRSG 내부에는 촉매만 설치하고 암모니아 분사장치는 가스터빈 배기덕트로 변동하여 설치하는 것을 검토하였다. 본 연구에서는 인천복합발전소를 대상으로, 암모니아 분사장치를 HRSG 중압 과열기 후단과 가스터빈 배기덕트에 설치하여 암모니아를 분사였을 때 대기 배출기준 8.5 ppm을 만족하는 암모니아 소비량을 각각 측정하였다. 연구결과 가스터빈 배기덕트 암모니아 분사방식이 HRSG 중압 과열기 후단 분사방식에 비해 소비량이 1.2배 정도 증가한 것으로 나타났다. 따라서 HRSG 수명 30년 운영을 고려한다면 HRSG 내부에 암모니아 분사장치를 설치할 수 없는 경우 가스터빈 배기덕트에 암모니아 분사장치를 설치하는 것이 추천된다.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.490-497
• /
• 2020

The 3D printing process provides a higher degree of freedom when designing ceramic parts than the conventional press forming process. However, the generation and growth of the microcracks induced during heat treatment is thought to be due to the occurrence of local tensile stress caused by the thermal decomposition of the binder inside the green body. In this study, an alumina columnar specimen, which is a representative ceramic material, is fabricated using the digital light process (DLP) 3D printing method. DTG analysis is performed to investigate the cause of the occurrence of microcracks by analyzing the debinding process in which microcracks are mainly generated. HDDA of epoxy acrylates, which is the main binder, rapidly debinded in the range of 200 to 500℃, and microcracks are observed because of real-time microscopic image observation. For mitigating the rapid debinding process of HDDA, other types of acrylates PETA, PUA, and MMA are added, and the effect of these additives on the debinding rate is investigated. By analyzing the DTG in the 25 to 300℃ region, it is confirmed that the PETA monomer and the PUA monomer can suppress the rapid decomposition rate of HDDA in this temperature range.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.521-549
• /
• 2022

Fiber lasers have made remarkable progress over the past three decades, and they now serve far-reaching applications and have even become indispensable in many technology sectors. As there is an insatiable appetite for improved performance, whether relating to enhanced spatio-temporal stability, spectral and noise characteristics, or ever-higher power and brightness, thermal management in these systems becomes increasingly critical. Active convective cooling, such as through flowing water, while highly effective, has its own set of drawbacks and limitations. To overcome them, other synergistic approaches are being adopted that mitigate the sources of heating at their roots, including the quantum defect, concentration quenching, and impurity absorption. Here, these optical methods for thermal management are briefly reviewed and discussed. Their main philosophy is to carefully select both the lasing and pumping wavelengths to moderate, and sometimes reverse, the amount of heat that is generated inside the laser gain medium. First, the sources of heating in fiber lasers are discussed and placed in the context of modern fiber fabrication methods. Next, common methods to measure the temperature of active fibers during laser operation are outlined. Approaches to reduce the quantum defect, including tandem-pumped and short-wavelength lasers, are then reviewed. Finally, newer approaches that annihilate phonons and actually cool the fiber laser below ambient, including radiation-balanced and excitation-balanced fiber lasers, are examined. These solutions, and others yet undetermined, especially the latter, may prove to be a driving force behind a next generation of ultra-high-power and/or ultra-stable laser systems.

• 대한금속재료학회지
• /
• 제50권9호
• /
• pp.659-667
• /
• 2012

Alloy 617 is a Ni-base superalloy and a candidate material for the intermediate heat exchanger (IHX) of a very high temperature gas reactor (VHTR) which is one of the next generation nuclear reactors under development. The high operating temperature of VHTR enables various applications such as mass production of hydrogen with high energy efficiency. Alloy 617 has good creep resistance and phase stability at high temperatures in an air environment. However, it was reported that the mechanical properties decreased at a high temperature in an impure helium environment. In this study, high-temperature corrosion tests were carried out at $850^{\circ}C-950^{\circ}C$ in a helium environment containing the impurity gases $H_2$, CO, and $CH_4$, in order to examine the corrosion behavior of Alloy 617. Until 250 h, Alloy 617 specimens showed a parabolic oxidation behavior at all temperatures. The activation energy for oxidation in helium environment was 154 kJ/mol. The SEM and EDS results elucidated a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbides. The thickness and depths of degraded layers also showed a parabolic relationship with time. A normal grain growth was observed in the Cr-rich surface oxide layer. When corrosion tests were conducted in a pure helium environment, the oxidation was suppressed drastically. It was elucidated that minor impurity gases in the helium would have detrimental effects on the high-temperature corrosion behavior of Alloy 617 for the VHTR application.

• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.85-92
• /
• 2021

Ambient Air Vaporizer (AAV) is an essential facility in the process of generating natural gas that uses air in the atmosphere as a medium for heat exchange to vaporize liquid natural gas into gas-state gas. AAV is more economical and eco-friendly in that it uses less energy compared to the previously used Submerged vaporizer (SMV) and Open-rack vaporizer (ORV). However, AAV is not often applied to actual processes because it is heavily affected by external environments such as atmospheric temperature and humidity. With insufficient operational experience and facility operations that rely on the intuition of the operator, the actual operation of AAV is very inefficient. To address these challenges, this paper proposes an artificial intelligence-based model that can intelligent AAV operations based on operational big data. The proposed artificial intelligence model is used deep neural networks, and the superiority of the artificial intelligence model is verified through multiple regression analysis and comparison. In this paper, the proposed model simulates based on data collected from real-world processes and compared to existing data, showing a 48.8% decrease in power usage compared to previous data. The techniques proposed in this paper can be used to improve the energy efficiency of the current natural gas generation process, and can be applied to other processes in the future.

• 한국가스학회지
• /
• 제24권6호
• /
• pp.55-60
• /
• 2020

세계적으로 친환경자동차의 연구 및 개발이 확대되면서 주행거리를 증대시키기 위해 차량의 부가적인 장치를 축소·삭제하거나 경량화를 위한 연구를 진행하고 있다. 그 중 내연기관자동차에 적용되던 다단변속기를 삭제하고 감속기로 대체하여 모터출력 값 제어를 통해 토크증대로 초기구동력을 확보하고 있다. 하지만 잦은 모터의 속도변화로 부하가 상승되는 결과를 가져올 수 있기 때문에 본 연구에서는 일반적인 감속기구조를 갖는 소형·경량의 수동 2단 감속기를 개발하려고 한다. 따라서 평행축을 갖는 구조에 대기어와 소기어를 삽입하여 평행한 축의 감속기형태에서 V-벨트로 기어를 연결하고, 저단과 고단의 기어비를 각각 설정하여 2개의 기어비를 갖는 2단 변속기를 설계하였다. 또한 변속기의 회전속도와 부하에 따른 동력성능을 시험을 통해 확인하고 구동시 발생되는 발열특성을 확인하여 변속기의 타당성을 검증하였다.

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.1-11
• /
• 2021

Thermal protection system structures such as double-panel structures are used on the skin of the fuselage and wings to prevent the transfer of high heat into the interior of an high supersonic/hypersonic aircraft. The thin-walled double-panel skin can be exposed to acoustic loads by high power engine noise and jet flow noise, which can cause sonic fatigue damage. In order to predict the fatigue life of the skin, the octave bandwidth SPL should be calculated as narrow bandwidth PSD or acoustic load history using interpolation method. In this paper, a method of converting the octave bandwidth SPL acoustic load into a narrow bandwidth PSD and reconstructed acoustic load history was investigated. The octave bandwidth SPL was converted to the narrow bandwidth PSD using various interpolation methods such as flat, log and linear scale, and the probabilistic characteristics and fatigue damage results were compared. It was found that average error of fatigue damage index by the log scale interpolation method was relatively small among three methods.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.565-572
• /
• 2021

Hydrogen is currently produced from natural gas reforming or industrial process of by-product over than 90%. Additionally, there are green hydrogens based on renewable energy generation, but the import of green hydrogen from other countries is being considered due to the output variability depending on the weather and climate. Due to low density of hydrogen, it is difficult to storage and import hydrogen of large capacity. For improving low density issue of hydrogen, the gaseous hydrogen is liquefied and stored in cryogenic tank. Density of hydrogen increase from 0.081 kg/m³ to 71 kg/m3 when gaseous hydrogen transfer to liquid hydrogen. Density of liquid hydrogen is higher about 800 times than gaseous. However, since density and boiling point of liquid hydrogen is too lower than liquefied natural gas approximately 1/6 and 90 K, to store liquid hydrogen for long-term is very difficult too. To overcome this weakness, this paper introduces storage method of hydrogen based on liquid/solid (slush) and facilities for producing slush hydrogen to improve low density issue of hydrogen. Slush hydrogen is higher density and heat capacity than liquid hydrogen, can be expected to improve these issues.

• Composites Research
• /
• 제35권1호
• /
• pp.47-51
• /
• 2022

전자기기 발열을 효율적으로 제어하기 위해 열전도성 복합재료에 대한 많은 연구가 진행되고 있다. 본 연구에서는 solvent 별 분산에 따른 carbon fiber의 배열성 관계를 알아보기 위해 Milled Carbon Fiber를 4가지 Solvent에 분산하고 Vacuum filtration 방법을 통해 탄소섬유강화 복합재료(CFRP)를 제작하였다. CFRP의 배열성을 알아보기 위해 광학현미경 관측과 섬광법을 통한 열전도도를 측정하였다. NMP와 Ethanol을 Solvent로 사용하여 성형한 CFRP의 평면두께방향 열전도도가 각각 10.79 W/mK, 10.57 W/mK 값을 보였고 이는 평면내부방향 열전도도에 비해 218%, 209% 향상된 결과를 보였다. Solvent의 상대적으로 높은 점도 값은 solvent 유체의 높은 전단력에 영향을 주어 성형 시 필러의 배열성을 결정하는데 영향을 주는 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2743-2759
• /
• 2020

A detailed computational fluid dynamics (CFD) simulation analysis model was developed using ANSYS CFX 16.1 and analyzed to simulate the basic design and internal flow characteristics of a 180 MW small modular reactor (SMR) with a natural circulation flow system. To analyze the natural circulation phenomena without a pump for the initial flow generation inside the reactor, the flow characteristics were evaluated for each output assuming various initial powers relative to the critical condition. The eddy phenomenon and the flow imbalance phenomenon at each output were confirmed, and a flow leveling structure under the core was proposed for an optimization of the internal natural circulation flow. In the steady-state analysis, the temperature distribution and heat transfer speed at each position considering an increase in the output power of the core were calculated, and the conceptual design of the SMR had a sufficient thermal margin (31.4 K). A transient model with the output ranging from 0% to 100% was analyzed, and the obtained values were close to the T_hot and T_cold temperature difference value estimated in the conceptual design of the SMR. The K-factor was calculated from the flow analysis data of the CFX model and applied to an analysis model in RELAP5/MOD3.3, the optimal analysis system code for nuclear power plants. The CFX analysis results and RELAP analysis results were evaluated in terms of the internal flow characteristics per core output. The two codes, which model the same nuclear power plant, have different flow analysis schemes but can be used complementarily. In particular, it will be useful to carry out detailed studies of the timing of the steam generator intervention when an SMR is activated. The thermal and hydraulic characteristics of the models that applied porous media to the core & steam generators and the models that embodied the entire detail shape were compared and analyzed. Although there were differences in the ability to analyze detailed flow characteristics at some low powers, it was confirmed that there was no significant difference in the thermal hydraulic characteristics' analysis of the SMR system's conceptual design.