• 한국화재소방학회논문지
• /
• 제32권5호
• /
• pp.40-45
• /
• 2018

이 논문은 천장형 에어컨의 기류가 화재감지기 작동에 미치는 영향을 분석한 연구이다. 천장형 에어컨의 기류를 형성시킨 가운데 화재감지기의 작동특성을 분석하기 위하여 ISO표준에서 규정한 방법으로 화재실험을 수행하였다. 실험은 10 m (가로) ${\times}$ 7 m (세로) ${\times}$ 4 m (높이) 크기의 화재실험장에서 수행하였다. 실험에 사용된 화재감지기는아날로그식 열감지기와 아날로그 연기감지기이다. 화원으로는 열감지기 작동을 위해 n-heptane을 사용하였고, 연기 감지기 작동을 위해 면심지(Cotton)를 사용하였다. 실험 결과, 화재감지기의 응답은 기류가 없을 때는 화원으로부터 거리가 멀어질수록 늦어지는 패턴을 보이나, 강한 기류에서는 그 패턴이 유지되지 못한 것을 확인하였다. 천장형 에어컨 기류가 없는 경우에 비해 기류가 강한 경우에 응답시간이 연기감지기는 121%, 열감지기는 39% 늦어졌다. 천장형 에어컨이 설치된 장소에서는 화재감지기 개수를 늘려 풍구 4방향에 모두 설치하거나 감도가 뛰어난 감지기를 설치하는 것이 화재의 조기감지를 위해 필요할 것으로 판단된다.

• 보존과학연구
• /
• 통권24호
• /
• pp.187-213
• /
• 2003

Sungseonsa Temple site in Chungju city in Chungcheongbuk-doProvince is written in "Goryeosa" as a building for Queen Sinmyeongsunseong, the mother of Gwangjong in AD 954 in Goryeo Dynasty. The museum in Chungcheong University takes charge of the excavation for 3 times from 2000 to 2002 and identified that its construction was carried out till Joseon Dynasty. Among the iron artifacts from the first excavation such as a weeding hoe, a hand knife, a lock, two nails and a plow which had conservation treatments, the sample was collected. Its micro-structure and method of manufacture were investigated. Excavation report for those artifacts has not published yet, therefore, the date of each artifacts is not clearly confirmed. The samples were collected from each part of the objects and then embedded in epoxy resin and etched with nitric acid. The examination of its microstructure is carried out under the microscope and the hardness values were measured by Vickers hardness tester. From the results, some artifacts show different manufacture method sin the each parts. The forming processes of the iron weeding hoe and the iron sickle are similar but the blade of iron weeding hoe was strengthened by carbonization whereas the blade of the iron sickle was done by quenching. The hand knife and the nails were produced through almost same methods and shows similar microstructures. The hand knife seems to be made by repeated beating and folding in low temperature resulting in fine crystallization, but the nail shows large crystallization due to processes in high temperature. Lock is made of white cast iron, that does not show any heat treatment.

• Journal of Welding and Joining
• /
• 제24권1호
• /
• pp.56-63
• /
• 2006

The characteristics of $CO_2$ or Nd:YAG laser welded 600MPa ade TRIP steel was investigated. He or Ar gas was used as a shield gas in case of $CO_2$ laser welding, but the shield gas was not used in case of Nd:YAG laser welding. Bead on plate welding was performed with various welding conditions. Defects in the joints of both welding type occurred at 1.8m/min but were not observed over the welding speed of 2.1m/min in case of Nd:YAG laser welding. However, porosity occurred in $CO_2$ laser welding and the tendency of decreasing with the increase of welding speed. The hardness was the highest at heat affected zone near fusion zone as well as at the fusion zone and decreased on approaching the base metal. In a perpendicular tensile test to the weld line, all specimens that have been welded at optimum conditions were fractured at the base metal, and the tensile properties showed the rather higher than those of raw material. In a parallel tensile test, the strength of the joints was higher than that of the base metal. Elongation was found to be lower than that of the raw material. Forming height by Erichsen test and elongation were deeply related with the ratio of base metal/weld metal and the maximum hardness of the weld metal. Also porosity induced to decrease the strength and the elongation. The maximum formability was recorded at approximately 80% as compared with that of the raw material with the optimum condition.

• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.96-103
• /
• 2015

본 연구는 목재에 난연성능을 부여하기 위한 난연제 조성물을 제조하고 그 난연제를 처리한 목재의 난연성능을 평가함에 있다. 난연제 조성물은 단독 혹은 혼합하여 소나무에 처리한 후 열분해 특성을 분석하였다. 처리된 시료의 연소특성 분석에는 TGA와 콘칼로리미터를 사용하였다. 시험결과, 단독약제에 의한 TGA의 열적 거동은 목재에 처리 시 Char의 형성 및 연소 지연 등으로 표현되어 나타났으며 이러한 연소특성은 이후 약제의 혼합에 의한 조성물의 난연성능의 발현에 영향을 미쳤다. 혼합약제의 목재 처리 후 콘칼로리미터에 의한 열특성 분석에서는 처리농도 및 처리량에 따라서 열방출률 및 총열방출량에 영향이 있었다. 난연제 조성물 중 FR1, FR2는 건축법 난연 3급을 만족하였다.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.635-640
• /
• 2016

Lactobacillus acidophilus n.v. Er2 317/402 strain Narine is known as a health beneficial functional probiotic culture and supplementary source of nutrition for newborns. In this study, in vitro antimicrobial activities of Narine-lyophilized (Narine-L), Narine-heat treated (Narine-HT), and Narine crude cell-free extract (Narine-CCFE) were evaluated against pathogen Cronobacter sakazakii (C. sakazakii) in agar as well as in a reconstituted powdered infant formula (RPIF) model. Inhibition zones of 30 mg Narine-L and Narine-HT were both 150 U, whereas inhibition zone of 30 mg Narine-CCFE was 200 U. Narine-L (1 g) and Narine-HT (1 g) were added to 10 mL of artificially contaminated RPIF, respectively, containing 100 μL of C. sakazakii (1.62×10⁸ colony forming unit (CFU)/mL). After treatment with Narine-L and Narine-HT for 3 h and 6 h at 37℃, less than ≤107 CFU/mL of C. sakazakii was detected in RPIF. Without Narine-L and Narine-HT treatment, the population of C. sakazakii increased up to 5.36×10⁹ CFU/mL after 6 h. Examination by transmission electron microscopy confirmed C. sakazakii cells were damaged by Narine-CCFE. Thus, employing Narine culture as a natural and safe bio-preservative may protect infants from C. sakazakii.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.426-431
• /
• 2016

The Fe-Cr-Al alloy system shows an excellent heat resistance because of the formation of an $Al_2O_3$ film on the metal surface in an oxidizing atmosphere at high temperatures up to $1400^{\circ}C$. The Fecralloy needs an additive that can act as a binder because of its bad compactability. In this study, the green compacts of STS434L and Al powder added to Fecralloy are oxidized at $950^{\circ}C$ for up to 210 h. Fecralloy and Al is mixed by two types of ball milling. One is vented to air and the other was performed in a sealed jar. In the case of Al addition, there are no significant changes in the electrical resistance. Before the oxidation test, Al oxides are present in the Fecralloy surface, as determined from the energy dispersive spectroscopy results. The addition of Al improves the compactability because of an increased density, and the addition of STS434L increases the electrical resistivity by forming a composite oxide.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.437-441
• /
• 2016

Recently, the grain boundary diffusion process (GBDP), involving heavy rare-earth elements such as Dy and Tb, has been widely used to enhance the coercivity of Nd-Fe-B permanent magnets. For example, a Dy compound is coated onto the surface of Nd-Fe-B sintered magnets, and then the magnets are heat treated. Subsequently, Dy diffuses into the grain boundaries of Nd-Fe-B magnets, forming Dy-Fe-B or Nd-Dy-Fe-B. The dip-coating process is also used widely instead of the GBDP. However, it is quite hard to control the thickness uniformity using dip coating. In this study, first, a $DyF_3$ paste is fabricated using $DyF_3$ powder. Subsequently, the fabricated $DyF_3$ paste is homogeneously coated onto the surface of a Nd-Fe-B sintered magnet. The magnet is then subjected to GBDP to enhance its coercivity. The weight ratio of binder and $DyF_3$ powder is controlled, and we find that the coercivity enhances with decreasing binder content. In addition, the maximum coercivity is obtained with the paste containing 70 wt% of $DyF_3$ powder.

• 한국미생물·생명공학회지
• /
• 제35권3호
• /
• pp.250-254
• /
• 2007

식물 뿌리혹 선충인 Meloidogyne incognita에 살충성이 있는 Bacillus thuringiensis 108 균주를 분리 선별하였다. 이 균주는 Gram양성이며, 포자를 형성하고, 운동성이 활발하며, lecithinase 및 catalase활성을 나타내었다. 이 균주가 생산하는 결정형 내독소(d-endotoxin)는 bipyramid형이었고, 편모항원성에 따른 균주의 동정 결과 serotype 3으로 표준 균주인 B. thuringiensis subsp. kurstaki의 편모항원성과 일치하였다. B. thuringiensis 108균주의 항선충성 물질은 Sephadex G-25 gel filtration, 활성탄 흡착 chromatography, Silica gel 흡착 chromatography 및 Sephadex G-10 gel filtration을 이용하여 정제를 하였다. 최종 정제단계인 Sephadex G-10 gel filtration 후에 항선충 물질의 $LC_{90}$는 $1.2\;{\mu}g/ml$이었다. B. thuringiensis 108 균주가 생산하는 항선충성 물질은 $100^{\circ}C$ 열처리에서 안정하였으나 autoclave($110^{\circ}C$ 30 min)를 했을 때는 그 독성이 완전히 소실되었다.

• Archives of Pharmacal Research
• /
• 제10권4호
• /
• pp.223-227
• /
• 1987

The effects of butylated hydroxyanisole and butylated hydroxytoluene on the immune status in normal male were evaluated. They exhibited significant decrease in the circulating leukocyte counts. Relative spleen and thymus weights were slightly decreased, but not stratistically significant. These were, however, significant liver hypertrophies in theier exposed mice. Splenic IgM PFCs per one million cells in 1/20 LD50 BHA and BHT exposed mice were significantly reduced IgM PFCs per spleen were similar tothose of control, except in 1/20 LD50 BHA exposed mice, where they were significantly suppressed. The precise nature of the inhibition is not clear. Direct cytotoxicity is not responsible for the depressed antibody response, even following relatively high doses of them, because the changes in spleen cellularity are not significant. Both substances, however, did not show any effects on the arthus reaction and delayed hypersensitivity reaction induced by heat aggreagted bovine serum albumin, and in vivo phagocytosis of colloidal carbon. In the light of the present results, in vivo antibody response as well as in vitro, may be sensitive to BHA of the present results, in vivo antibody response as well as in vitro, amy be sensitie to BHA and BHT. Further elucidation of the precise nature of antibody suppression in their exposed mice, is warranted.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.73-80
• /
• 2010

Since the Korean War, Korea has experienced modernization. The population increase by baby booming has asked for more space for educational facilities. In such a situation, the purpose of educational facilities was to accommodate continuously increasing students, rather than seeking for quantitative demands. In addition, in accordance with social changes, educational shifts were required. After the revision of the seventh national curriculum in education in 1997, the school buildings became varied. The design of buildings in accordance with educational curriculum has been improved, but still lack of forming comfortable environment and considering energy efficiency in school buildings. For the improvement of educational environments, educational media such as TV and computers have been provided, and energy systems, including heating and cooling systems, has been continuously increased. As a result, it appeared that energy use in school buildings and facilities has been steadily increased and that the structure of energy consumption has been also changed, especially with regard to electricity use. Living in the 21st century, human beings face global environmental issues, such as global warming, geographical climate changes, and ozone destruction that are the consequences of fossil energy use. Therefore, even in industrial areas, considering a counterplan for low energy use is being paid attention. Starting with Kyoto Protocol in 1992, people try to decrease carbon dioxide and to develop alternative energies (i.e. natural energy); for example, solar energy, wind force, terrestrial heat, and water power. Advanced countries already set up a criterion for $CO_2$ decrease ranging from office buildings to residential houses and also propose alternatives for the $CO_2$ decrease. However, there is no such a plan for low energy use and $CO_2$ decrease in school facilities, and any research on the actual conditions was not accomplished. Thus, this study examines energy demand in classrooms that take up a large portion of energy demand in school building structure.